How to get rid of freeform input layer

Hey。Somehow i have started getting a gray layer for drawing letters every time i have a text input field。i dont know how to get rid of it permanently。also i can no longer hold down a letter to get a capital letter and the autocorrect doesnt work。help！justin

how annoying is it to go to a seperate screen set and then click a midi region just to edit it?
You haven't grasped the concept of screensets.
In the "old" way of working, in your arrange, you double-click on a region, which opens that region in an editor. You may have to move the editor position/size etc. You make your edits, and then close the window.
The screenset way of doing this is simpler and quicker. In your arrange, you select your region (one click, rather than a double click). You then hit a key command, lets' say "2" to switch to your editor screenset, which has the eitor or combination of editors you use, in link mode. As soon as you hit your 2 key, the editors will be recalled at the precise locations you specified, showing you the contents of your selected region.
When you are finished editing, just hit "1" to go back to your main arrange window.
Once you get used to this, you'll find it's a lot quicker and more efficient than all that rsi double clicking and window closing...

Similar Messages

How to get rid of the new bottom layer with piano roll etc. in arrange??

Hey guys,
Just a quick question i suppose.
I work with 2 screens.
When I double click a midi event, i want the piano roll to open in a floating window, just like it used to be, and not in the new bottom layer (pop up) bar in the bottom of the arrange window. I want this because i like to edit on the second screen while still haveing an overview of my arrange on my 1st screen.
Does anyone know how to do this? Or perhaps know how to get rid of this new bar all together?
I hope someone does....
thanks in advance!
cheers,
PM

how annoying is it to go to a seperate screen set and then click a midi region just to edit it?
You haven't grasped the concept of screensets.
In the "old" way of working, in your arrange, you double-click on a region, which opens that region in an editor. You may have to move the editor position/size etc. You make your edits, and then close the window.
The screenset way of doing this is simpler and quicker. In your arrange, you select your region (one click, rather than a double click). You then hit a key command, lets' say "2" to switch to your editor screenset, which has the eitor or combination of editors you use, in link mode. As soon as you hit your 2 key, the editors will be recalled at the precise locations you specified, showing you the contents of your selected region.
When you are finished editing, just hit "1" to go back to your main arrange window.
Once you get used to this, you'll find it's a lot quicker and more efficient than all that rsi double clicking and window closing...

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

How to get rid of compounded keys on WebI report

Hello,
I am (very) new to Business Objects and Web Intelligence, and have created a Universe on a BW multicube. 
When I setup the WebI report doc, the Fiscal year (and Fiscal Period/year) are showing with the Fiscal Variant as a prefix (e.g. Z3/2009). 
Using a formula to 'strip' the characteristic to 2009 confuses the data (as there is no 'key' of 2009, only Z3/2009).
Filtering by Fiscal Variant (the Z3 part) doesn't seem to change things, or even putting the fiscal variant in as a column (these techniques used to work quite nicely in Bex and Web Bex). 
Is there some magic I have missed in the Universe building process (which I have purposefully kept very simple, as there are plenty of these to build!!). 
I am sure folks have seen (and sovled) this before, as Fiscal Year (and Fiscal Period/year) must be used often, and these are standard SAP time fields. 
However, i can find nothing in help or even forums (perhaps I am not searching for correct key words). 
I haven't tried building the universe off a Bex Query, and am kind of reluctant to do this, as it builds in another layer to maintain. 
Anyone know how to get rid of the compounded part of the (fiscal year) objects? 
Your help and comments are much appreciated. 
Regards, 
Martin.

Hi Ingo,
I am also facing the same problem.
I have an object Showing (TR/1223xxxx). I was able to remove "TR/" in bex by dragging the compunded object in Rows section and supressing it to "No Display" but in Webi I am still getting (TR/1223xxxx).
In Webi if I create a formula and trim the above value, i am getting "#UNAVAILABLE" in Key Figures, i.e. measures (smar Measures)
Is there a way to get rid of this compunded value.
One more requirement, in Bex Query, I am giving dislay as "Key and Text" but in Webi, i get only "Text" for that object. I have to explicitply drag and use the Object - key (detail object of that particular dimension). Is there a way to get both Key and Text in Webi using a single object.
Kindly help. Thank You!
Edited by: Aikansh on Mar 9, 2012 8:49 AM

How to get rid of background noise when recording voice on iphone 5 ?

every time i record a voice over i hear wierd background noise can someone tell me how to get rid of it im using my headphones to record btw

Go to System Preferences / Sound and click on the Input button. You should see two items listed in the device menu: the Internal Microphone and Line In. (There may be others if you also are using your USB or Firewire ports for input devices.)
Select Internal Microphone and adjust the Input Volume control to the far left (minimum). This will mute the computer's internal microphone.
Then select the Line-In (or other device) and adjust the input level as needed to make your recording.
Good luck.

How to get rid of any crawls on selection

I am trying to understand how to get rid of the ant crawl outline on a selection. I am selecting a re-coloring some selected areas on a picture of a house (to decide what color to paint the house). I created a separate layer, selected the item and recolored it under Edit-recolor selection, but I still have the ant crawls.
Thanks for any help.

Barbara,
Thanks for relying. I don't want to "get rid of" the selection so much
as I just want to be able to look at it with the new color without the
distraction of the any crawl outline. In other words, once I am done
recoloring the selection, i want to "click out of it" and move onto
working another selection.
Also, I have another post asking how to recolor an object but keep its
texture. I am trying to "repaint" my house in PE, but it if select,
say, the siding, it recolors all of it but I lose the detail or
texture of the wood -- it is all just a solid, opaque color. Is there
a way to recolor an object but keep its shading, highlights and texture?
Thanks for any help.
Paul

I cant update nor download any applications. My password was always invalid. And other username is prompted richardca0521@yahoo.ca which is not my account. How to get rid of this apple id and use my account for download? I have registered this to itunes.

I can't update nor download any apps in itunes. Prompted invalid password, upon checking the apple id was not mine. The id was [email protected] whic is not mine. Pls. Help how to get rid of this. Thank you.

try and delete the apps and re-add them

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. Help!

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!

The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

How to get rid of Safari !!!!!

I must have missed the message to install Safari during one of the many iTunes updates and now I'm stuck with it on my computer taking up 60GB of space! I've tried removing it through Control Panel -> Uninstall Programs, but get the message that I don't have administrator privilages - which I do. Thinking I may have had this installed while I was logged in under my main administrator name, I logged off and logged back in under my only other user name and tried again - same message. So I went to the Safari folder and changed all security privilages to full access for both accounts and it still won't uninstall. How can this program claim I don't have administrator privilages when I used the only two user accounts on my computer?? So in a fit of defiance and desperation, I deleted the Safari folder and then ran the name "safari" in Vista's search box under the Start menu (I even included the wildcard .* to catch all examples). Guess what? Rather than find all traces of safari on my computer so I could delete them manually, Safari started running again!! I cancelled the program before it finished loading and went to recheck the Program Files folder and Safari was back there with a full 60GB of files again! I CAN'T GET RID OF IT!!
Safari is a malicious software program as bad as any Malware or Adware I have ever seen! How can I get rid of it??
(and no, I really do not want Safari - I don't care if you think its the greatest thing since sliced bread - I make the choices on my computer, not some software engineer or marketing division and I DON'T WANT SAFARI!!)
Any suggestions on how to get rid of it? Did I miss something?
Thanks all,
LH

The Safari update is not clear what it is and provided no explanation of what it was - it simply states "Safari". For all I know it could have been an indexing file for iTunes. There was no explanation as to what is was and the install checkbox was already checked so the unsuspecting may quickly and accidentaly hit install along with the iTunes update, thinking it was a required part of iTunes. Regardless of how it got there, I'm trying to get rid of it and it won't uninstall.
Now you may fancy yourself as some kind of wunderkind software expert, but you apparently do not know Vista because it really does take up 60 GB and every time I delete it, it tries to reinstall itself. These are not multiple installations and I am the only user on this computer. You haven't offered me any help - only insults. If you aren't willing or able to offer help or assistance in the most sincerest form this request was intended, than stay out of this thread. Your actions and insults reinforce the prevailing belief that Apple users are unkind, rude, self-important snobs.

HT5622 how to get rid of an old apple ID on my iphone 5 . the ID belongs to a store where I bought my phone ,and it's in a different country ??

How to get rid of an old Apple ID on my iphone 5 ? The ID belongs to a store I bought my iphone from ,and it's in another country.

You can't. That's the new security feature of iOS7 that users (and others) requested to prevent stolen devices from being restored by theives and reused. Contact the "store" you purchased your phone from and see what they say.

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can use my ID, which is in Mail, Contacts etc. The ID I get, I can't find, so that I can delete it. What to do?

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?

My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed?

I have very thin, colored lines running vertical on my desktop monitor screen. I don't know where they come from or how to get rid of them. I started with one and now have three. Can anyone give me some insight about what to do in getting rid of them?

I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?

I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere.

How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

How to get rid of title bar of a quicktime window?

The main problem:
I want to display the title info etc about each track as they play in iTunes. How can I do that on an otherwise black screen (desktop) (I don't want to use the visualizer with its psychedelic patterns).
Background:
I want to play music from iTunes (many pieces in a row - for like a full day). While this is happening I want the title etc of the tune to be displayed on the screen, like white smallish text against a black background in the lower right hand corner. At the same time I want slides to be displayed on the screen.
So, with iPhoto I can run a slide show but only while one piece of music is playing.
Instead I can have the desktop slowly change (from system preferences) with images from a folder every 5 seconds. That's not too bad. Looks good, actually, except for that annoying menu bar at the top! Well, black tape can hide that one (or a second display and move it over there). Now iTunes can play away all day.
As to how to get the title etc of the song playing displayed I was thinking about somehow extracting it from iTunes with applescript, then paste it into the text track of a quicktime movie, and display that little movie in a small window. I have figured out how to get rid of the controller from the window. But, I can not figure out how to get the title bar of the quicktime window to go away - that is I want a window with nothing around it, neither controllers nor title bar nor anything. How do I create such a window. Any good ideas out there?
Or is there a totally different way of obtaining the same effect?
Thanks.
G4 Mac OS X (10.4.8)

Hi,
You could try posting at the QuickTime discussion area. There might be an iTunes visualizer that allows you to make a slideshow with track info. It has been a while since I tried making a SMIL file, but I think you could do what you want with that. Not sure how you create a streaming text of track information. I would have to do some reviewing.
gl,

How to get rid of freeform input layer

Similar Messages

Maybe you are looking for