How to get rid of historical data in MRP

Hi,
We have recently done Re Go-Live for a client. It involved changing the existing company code and re-assignment of new company code to existing plants. While doing so, transactional data that was created before Re Go-live still shows in the system.
Take example of MRP, when we run MRP reports, it shows all requirements that are still open because of committments generated earlier.
This is the case with every module infact, but we have restricted many reports by using variants, this way, only transactional data (PR, PO, SO etc etc) after certain date is displayed for the users.
We are facing the problem mainly with MRP since there is no "DATE" field to restrict the system from showing both previous & new requirements. Is there any customizing activity that can be performed to apply such restriction?

Transactional data for business cases that were never closed cannot be archived.
When reading the term Re-Go-Live then I assume that there are numerous open transactional data which cannot be closed because of the changes done already. you should have started in a new clean client.
You will certainly have headaches for many years with this mess.

Similar Messages

How to get rid of 'other' data

I have masses and masses of 'other' data on my iphone. I have stripped it of all music (500 songs) and it has made no difference. I understand the data is most likely old apps etc not deleted properly, like a ghost trail. I have deleted all unnecessary texts, voicemails, calls, photos, internet history, etc. I have nothing left to delete data-wise. Does anyone know how to get rid of this 'other' data? It was literally taking 6.8gb of my 8gb phone, i have halved that by checking and unchecking 'automatically sync' in itunes, but still can't shift the rest. Really slowing my phone down

Most of the "other data" on my phone is the forced IOS 7 upgrade from Apple.
They push the upgrade(around 850 mb) and also reserve another huge chunk of space on the phone to do a backup and install on the phone (mine is about 2.5 gigs after some manipulation).
If you do not want the upgrade, it just sits there on the phone.
You can not remove it.
Apple will not sign and allow you to restore IOS 6 to your IOS 6 phone.
If you ever need to do a restore of the OS, you will be forced into IOS 7.
When a new upgrade is pushed to your phone, the amount of confiscated storage will accumulate with each subsequent release.
Apple can't be bothered to delete the older/outdated upgrade file being replaced by the new, hence the "other data" just grows over time. I have seen mine get to almost 6 gigs.
You can use Itunes on your computer to "download only/ not install" the newest update, then do a restore of your data and a sync. This appears to remove all the outdated updates from the phone.
You will however, still have about 2 gigs of your storage space still hijacked by Apple to store the most recent forced upgrade.
I am still on IOS 6 and plan on sticking with it simply for personal preference and vision reasons, as that is my prerogative.
It does perplex me why Apple refuses to make IOS 7 optional for users that have always had IOS 6. I can fully understand insisting that new devices run IOS 7, and obviously many IOS 6 users would have jumped anyway.
Apple needs to add an asterisk to word *adoption rate of IOS 7 in their corporate guidance statements.
They knowingly mislead given the current reality that ultimately no one can opt not to adopt it.
Hotel Cupertino, "You can check out, but you may never leave"

How to get rid of 'other' data in capacity?

In april, i got my iphone 4 replaced because of a broken lock button. When i brought the replacement home, i noticed that when i plugged it in there was a lot of "other" data in the capacity bar, and there was nothing on my phone at the time. Now, the other data is still there and it takes up more than half of my storage, and i have no more storage left for pictures or music or apps. I think the other data is a result of a corrupted backup, because my backups do not work (once i figured that out i stopped using them). But now i need to find a way to get the other data off of my phone while keeping all of my photos and contacts without a backup, which means restoring it isnt an option until i find some way to back up my photos and contacts individually. I need to do this because if i backup everything on my phone on itunes, the "Other" will too be backed up, and then i'd be in the same place. can someone please help me? If i call apple tech support will they be able to help? Please let me know if you have had this problem/ has it been resolved/ how it was resolved. Thank you.

You can use iCloud to backup your contacts, and you can import your photos to your computer. After restoring as *NEW*, then you can re-sync your photos; and sign back into iCloud and "Merge", to retrieve all contacts.

How to get rid of extra data in character buffers for key and data

Hi -
Using the C API, I am using a cursor to just pull all the key/value pairs from a database.
Here is the relevant code:
/* Initialize key/data structures. */
memset(&key, 0, sizeof(key));
memset(&data, 0, sizeof(data));
key.flags = DB_DBT_MALLOC;
data.flags = DB_DBT_MALLOC;
if((ret = dbp->cursor(dbp, NULL, &cursor, 0)) != 0) {
dbp->err(dbp, ret, "%s", DATABASE);
goto err;
while((ret = cursor->c_get(cursor, &key, &data, DB_NEXT)) == 0) {
fprintf(cgiOut, "%s|||%s\n", (char *)key.data, (char *)data.data);
free(key.data);
free(data.data);
if(ret != DB_NOTFOUND) {
dbp->err(dbp, ret, "cursor->c_get");
goto err;
This produces lines that in many cases contain extra characters at the ends, as though the malloced data was not being cleared before use. I wrote this routine originally in Java, and solved the problem there with the "setReuseBuffer(false)" Database Entry routine. Is there something similar in C?
Garey Mills

Sandra -
I am using 4.5. I have solved the problem, however, by using the following code
while((ret = cursor->c_get(cursor, &key, &data, DB_NEXT)) == 0) {
char keyd, datad;
keyd = (char *)key.data;
datad = (char*)data.data;
keyd[key.size] = '\0';
datad[data.size] = '\0';
So I am just using the size data returned to null terminate the strings in the buffers. Now everything works. Thanks for your response;
Garey Mills

How To get rid of "other" data on my iphone 4?

I just realized that my other file on my iphone has grown to 3GB and I dont know how to delete the "other" file?
Dose Anybody know how?????

I don't think that you are able to. I'm pretty sure the other contains the hardware that your phone needss to properly work.

How can I get rid of the dates and time on my Notes

How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

Yes, it's seems like a poor design decision.
By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
I doubt the designer actually uses the app.
TSAW

How to get rid of 'Your computer's bluetooth firmware is up-to-date' message?

Hi. I just updated the Bluetooth on my iMac (OS X 10.5), but now each time I turn on my computer, this (annoying) message show up: Your computer's bluetooth firmware is up-to-date.
How to get rid of it?
I tried someone's suggestion to turn it off by going to System Preference > Account > Login Items, but it's not listed there..
Also, is there a way to use FaceTime on my iMac?
Thanks!

Hello, not sure about the Bloetooth thing, I have none, but it sounds like some file didn't get removed aftrt a BT update.
As far as FaceTime, no, it requires the App Store & 10.6.6...
"To download FaceTime from the Mac App Store, you need a Mac with Mac OS X 10.6.6 or later."
http://itunes.apple.com/us/app/facetime/id414307850?mt=12&ls=1
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

I've an iMac with OS X 10.4.11. Sudden email problem: every received email has, after the header, 1 - 2 pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, etc.) I don't know why this now happening, and I don't know how to get rid of it.

I have an iMac using OS X 10.4.11. Beginning several days ago, all incoming emails have, after the usual email header and before the message appears, one to two pages of technical data (e.g., Dkim-Signature, Domainkey-Signature, Content-Transfer-Encoding, etc.). This is similar and more complex that the info one receives when an undeliverable email bounces back. I don't know where this stuff comes from, or how it came, and I don't know how to get rid of it. Any ideas? I'm something of a newbie to computers (um, what's a Tag?).

That just sounds like the mail headers. Most people don't know (or care) about them so they're usually hidden.
Check Mail -> Preferences -> Viewing -> Show header detail
I'm guessing it's set to 'All'. Switch it to 'Default' or None as you prefer.

I moved some e-mailed pictures to my iphoto library and they have the date rightin the middle of the image..how do I get rid of the date?

Imoved some e-mailed photos to iphoto, but they come up showing the date in the middle of the image..how do I get rid of the date?

Thhere is no way that iPhoto did that - either source put the data on the photo, you used a photo editor to put it there or the receiving e-mail client is displaying it there - iPhoto has no capability to add any text including dates to a photo
iPhoto will display the date on an event while viewing photos if you have that option set in the preferences
LN

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

Get Rid of Relative Dates in Applications?

How do I get rid of relative dates in applications such as Mail?
I cannot find anything in the Mail Preferences to change this.
Nor can I find anywhere in System Preferences -> Date & Time and International to change this behaviour.
Settings in View->Show View Options, as previously recommended, do not affect the date format in applications.
Thanks
Al Maloney

Why get rid of them?
(1) They require extra steps in my brain to calculate the date of the document.
(2) When I do not know to-day's date, how can I calculate yesterday's date?
(3) Aesthetically, they are inconsistent with the list of dates.
(4) I just do not like them.
Sláinte!
Al

How to get rid of the "time out" when using DAQ AI in the example program

I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
Thank you,
Yajai.

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

How to get rid of error message for the material?

Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

How to get rid of files on time machine that no longer exist

I replaced my computer several months ago when my old one died. A large amount of data which was in a partition on my old computer is still on my time machine and is taking up a lot of space and forcing time machine to delete backups much sooner than I would like. I don't know how to get rid of it. If I try to delete that folder from an individual backup, I get the message, "The operation can't be completed because backup items can't be modified." Of course, I can't delete it from my new computer because it's not there! Any help appreciated.
Marion

The best method is to archive the contents of the TC to a disk.. archive is available via the airport utility.
Simply plug in a USB drive large enough to store all the material presently on the TC, 1TB or 2TB or 3TB.. whichever model it is.
Archive I have drawn red box around.
Once the archive has completed ..
Use the Erase disk.. just the Quick erase is ok.. takes a couple of min and then you have a nice empty drive to start loading TM backups on.

Any way to get rid of Relative Date display in Mail?

This is a long standing problem for me and macs for as long as I can remember. I can't stand relative dates, and no matter what I do they always reappear. I just switched to MacMail and much to my disappointment, I find relative dates there too. Is there ANY permanent way to get rid of Relative Dates once and for all?

Carsten, you CAN get rid of the "negative number" entries. If you use the wizard to build the dimension, when it's all done, go back into the dimension object and delete the default "standard" hierarchy that gets created. Even though you apparently DO have to have a default level, you do NOT need to have a default hierarchy.
This will get rid of the negative numbers and associated logic from the loads...but you still end up with both a DIMENSION_KEY and KEY column...both having exactly the same value in it.
I wish Oracle would give you an option when creating a dimension to specify whether or not it's a dimension with levels...and if you said NO it would simply have a DIMENSION_KEY without any other keys. Glad to hear though that I wasn't missing something obvious on how to turn that off.
Thx,
Scott

How to get rid of historical data in MRP

Similar Messages

Maybe you are looking for