How to get rid of messages in idx5 idoc adapter

We are having a lot of messages in idx5 (327828 for a particular date). When I go to sxmb_moni "Monitor for processed xml Messages" I do not find these messages there.
We are running the archiving/deletion reports and I expected theese to take care of the Idoc Adapter messages as well. Is this not the case? Are there separate archiving/deletion jobs for the idoc adapter? How do I get rid of the messages in the idx5 xml messages in the idoc adapter?
When running the report RSXMB_SHOW_STATUS this is today (after archiving/deleting all messages older then one day) showing good 30.000 messages in the database - and do not show the huge number of messages in the idoc adapter.

The baseball is probably the symbol assigned to you in Address Book - take a look and see. It appears on all your sent mail in Mail, but not on the messages as they appear to recipients, so don't worry about it too much. If you don't like it, you can remove or replace it through Address Book.

Similar Messages

  • How to get rid of message in Konsole "System Serial#" looks incorrect or invalid

    I hava a one year old MBP, in real it is some weeks older than this.
    The Display showed a thin yellow line on the left side of the display.
    I took it to the Apple-Store and they, after some discussions about the warranty, took it and repaird it.
    On the next day i went for it to get it out of the store (they told me to fetch it).
    First thing, i checked for the error. Sadly it came up again.
    What did they do? They changed the MLB (Motherboard).
    OK, i do now have a "new" MBP.
    The same error (yellow line) appeared and they took it to repair it again, this time changing the display.
    Three days later they told me to fetch it again.
    Heading for the Store, have a look on the Display..... very good no yellow line. Great!
    BUT! the Display is lightly turned in the case. Grrrr..
    If it is a Laptop for 300 $ ok but not on a system for 2000 $.
    I will bring it back i a few days to "repair" it, again.
    Now to the mentioned Console-Message:
    "Hardware SerialNumber "System Serial#" looks incorrect or invalid"
    After replacing the MLB, the Hardware changed.
    Is it a problem for the Software?
    What can happen, and what restrictions/problems will i have?
    How do i get rid of it?

    When the logic board is replaced, the serial number has to be flashed back into the records - there is a special tool for that and they will need to do that or you will show an incorrect serial number forever and it may result in problems. That part is easy to fix - simply tell them they need to flash/re-register your old serial number.
    As for the other problems: good luck; if they keep replacing/repairing for the same problem more than 3 times, ask (very politely) if one could consider replacing the machine as the repairs are not fixing the problem.

  • How to get rid of message "Backup disk not available"?

    I use an external disk for Time Machine.
    I switch the disk on every couple of days. In the mean time, I get a warning message every hour that:
    "Time Machine could not complete the backup, The backup disk is not available".
    How can I get rid of this message? It is really becoming irritating.
    Patrick

    patrick Wursteisen wrote:
    I switch the disk on every couple of days.
    that kind of beats the purpose of TM backups, which are usually happening on an hourly basis. if you intend to continue this way, you might as well forget about TM and rather create a bootable clone of your startup disk every couple of days. Carbon Copy Cloner or SuperDuper will even allow you to do incremental clones.
    another option would be to change the frequency of TM backups using _*Time Machine Editor*_.
    happy computing !
    JGG

  • How to get rid of message "Action Processed."

    When I save data in one of my reports, I get a confirmation message "Action Processed."... may I know how to disable it...?
    Thanks in advance

    Under the Page Process, see Messages - Process Success Message.
    Jeff

  • How to get rid of system acknowledgements in JDBC adapter

    Hi,
    I've set up a receiver JDBC adapter.
    It works good, but sends back acknowledgements which i dont want
    On help.sap.com i found:  "....If you want to prevent a synchronous system acknowledgement from being sent back, even if the sender requests it, set XI.AckFinal=false....."
    In the channel configuration i'm on tab "parameters" >> tab "advanced" and i checked the box "advanced".
    I get "additional parameters" screen
    There is a box where i can fill name and value for parameters.
    If i put:
    name = XI.AckFinal
    value = false,
    i still get the acknowledgements from the database.
    What must i do to get rid of the acknowledgements?
    Thx.
    Robert

    Hi Srinivas,
    I think you are referring to the tab "module"
    What i am referring to is the tab "parameters" , etc etc.
    I dont think i would need an additional module to get rid of the system acknowledgements.
    Thx.

  • How to get rid of message You are no longer protected agaist online attacks.

    Hello,
    I have an old mac 10.4.11. When logging on to firefox there is a message that reads Your version of firefox is no longer protected against online attacks
    They won't let me upgrade firefox.

    Firefox 3.6.17 is compatible with Mac OSX 10.4 and PowerPC architecture; later versions of Firefox don't support either.
    Get it here: http://www.mozilla.com/en-US/firefox/all-older.html

  • How to Get rid of message icon on homescreen

    heres my problem
    hoping someone can help me.
    On my home screen i have the icon showing on top saying i have 1 message.
    But i have no messages of any sort. No Emails, No I.M.'s, No BBM's, No SMS or MMS, No Facebook or MySpace.
    i have checked and double checked all of the above mentioned. I have turned off phone. i have removed battery. i have done the *228 update.
    None of the above has worked.
    How do i delete this icon??? its to the point of being annoying to me.
    Solved!
    Go to Solution.

    Is it a regular yellow mail icon?  If so, go to Messages.  Hit the menu key and select "View Saved Messages."  If there is nothing unread in there, do the same thing and select "View Folder" and check each and every folder until you find the message.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Getting rid of message

    I have the message Cannot get mail - the connection to the server failed.  I did delete yahoo on iphone and reinstall and stated getting email again.  But the message still comes up.  Does anyone know how to get rid of message from screen?  Thanks in advance

    go to mail contacts calendars under settings
    delete the yahoo account
    re add the yahoo account
    dont need the yahoo app you use the native mail app with a yahoo account

  • Getting rid of message boxes

    Can anyone help me find out how to get rid of those pesky HP ink level or paper out dialog boxes that clutter up my screen?

    how to get rid of message boxes

  • Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

    Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

    Lion no longer supports PowerPC apps. If this is Microsoft Office 2008 (Entourage 2008) then you should disable the syncing services.  (I don't have Office 2008 installed anymore so I don't know exactly what it's called anymore.)  If you have Microsoft Office 2004 or earlier, then it can't be run on Lion at all since Lion removed Rosetta, which is what allowed a PPC app to run on an Intel based Mac.
    Also, I believe Microsoft removed sync services from the current Outlook 2011 (which replaces Entourage) so even upgrading to a newer version of Microsoft Office will not get you back that calendar sync feature.  Supposedly Microsoft is working on a new syncing system, but I wouldn't hold my breath.

  • How to get rid of the message Client submission probe stuck in the Exchange Server Queue?

    We have Exchange 2013 in Hybrid with Office 365.
    How to get rid of the message in the Exchange Server Queue?
    Mounting the database fixed it.
    Thanks!!!

    Mounting the database fixed it.

  • How to get rid of the error message we could not complete your iTunes store request?

    How to get rid of the error message we could not complete your iTunes store request?
    having this problem when trying to authorise an newly downloaded app in iTunes

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.
    Edit

  • How to get rid of error message for the material?

    Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

    this means material is blocked for procurment
    three kinds of block can be there
    01 Blocked for procment/whse
    02 Blocked for task list/BOM
    03 Blocked for Purchasing
    GOTO MM42 give material n plant data
    Select BESIC VIEW
    there is a field called as material block remove the blocking reason
    Hope this will help
    Edited by: WISH on Mar 24, 2008 6:33 AM

  • How to get rid of 'Your computer's bluetooth firmware is up-to-date' message?

    Hi. I just updated the Bluetooth on my iMac (OS X 10.5), but now each time I turn on my computer, this (annoying) message show up: Your computer's bluetooth firmware is up-to-date.
    How to get rid of it?
    I tried someone's suggestion to turn it off by going to  System Preference > Account > Login Items, but it's not listed there..
    Also, is there a way to use FaceTime on my iMac?
    Thanks!

    Hello, not sure about the Bloetooth thing, I have none, but it sounds like some file didn't get removed aftrt a BT update.
    As far as FaceTime, no, it requires the App Store & 10.6.6...
    "To download FaceTime from the Mac App Store, you need a Mac with Mac OS X 10.6.6 or later."
    http://itunes.apple.com/us/app/facetime/id414307850?mt=12&ls=1
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 2GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.

  • I keep getting a community toolbar error message. I am running Yosemite. I have no idea what it is referring to. Any help on how to get rid of it?

    I am getting a community toolbar error message on Safari. Does anyone know how to get rid of it? I am running Yosemite. Thank you!

    To remove the "Conduit" spyware, take the steps below.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard by pressing the key combination command-C. From the Finder menu bar, select
              Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with these lines:
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin /Applications/Toolbars
    You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
              Application Support/Conduit
              InputManagers/CTLoader
              LaunchAgents/com.conduit.loader.agent.plist
              ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Remove any extensions with the word "Conduit" in the description, and any others you don't know you need. If in doubt, remove all of them.

Maybe you are looking for