How to get rid of Quicktime logo when loading?

I've made a moving logo on a white background using Quicktime. I've then embedded this on a web page where there also is white background. This looks very neat, apart from the Quicktime logo that appears before the "movie" has loaded, which I think spoils the clean design of the page, even if it's just for a few seconds. Is there a way of removing this?
Message was edited by: Jonsworld

Thanks for staying with me.
I'm getting a little closer, but there is still (sometimes) a flicker of the logo before the film starts, and also in Safari a black square is popping up. Please have a look: www.stilsans.no. It is made by a slideshow generator called Pulp Motion and then exported as a Quicktime movie. I read somewhere about a poster image one can put at the start (could be white?), but don't know how this works and if it can solve the problem. Any ideas?

Similar Messages

  • How to get rid of Quicktime logo

    Hello folks,
    thanks to James and his advice I had managed to post my videoclip on the website the way I wanted. (make it start to play right away as a loop without controller being attached to it)
    But there is one little problem, which I did not notice until now. Before the clip starts to play, Quicktime logo appears for about 2-3 seconds. Than it dissapears and clip shows up and starts to play. Does anyone know how to get rid of that logo?
    Thanks for any tip or advice.
    videoman

    I think this has to do with another setting that is available in QuickTime Pro....something like faststart or something like that. Basically, I think the QuickTime logo is being displayed while your movie is downloaded and your movie doesn't start until it is fully downloaded.
    I think you may be able to run your QT movie through iSquint and get the faststart thing activated if you don't have access to QTpro...
    http://www.isquint.org
    Just push the quality slider to FULL and in the advanced panel enter in your movie dimensions. I don't know if this will do the trick, but it's worth a try. Otherwise, you should be able to enable faststart in QuickTime pro.

  • How to get rid of filter componet when inserting analysis grid

    Hi expert,
              I try to inster a analysis grid in say bex analyzer, but when I display this table, there is anoter component named 'Filter' together with analysis grid. why this filter component comes? and how to get rid of it?
    Many Thanks,

    Hi,
    this behavior sounds unusual. Normaly you insert each component individual.
    Did you just insert a table or die you "open query"?
    If you opened a query, your query is inserted into the standard workbook and if this one includes the filter then you will get it ...
    If you switch on the design mode, you will see each component and you can delete the ones you don´t want to use - just make roght mouse click on the component and select "delete".
    regards
    Cornelia

  • How to get rid of background noise when recording voice on iphone 5 ?

    every time i record a voice over i hear wierd background noise can someone tell me how to get rid of it im using my headphones to record btw

    Go to System Preferences / Sound and click on the Input button. You should see two items listed in the device menu: the Internal Microphone and Line In. (There may be others if you also are using your USB or Firewire ports for input devices.)
    Select Internal Microphone and adjust the Input Volume control to the far left (minimum). This will mute the computer's internal microphone.
    Then select the Line-In (or other device) and adjust the input level as needed to make your recording.
    Good luck.

  • How to get rid of Apple logo?

    When I am making a DVD project to be burned I see a small white Apple logo in the lower right. I don't want this to be there when I burn my DVD because it will be a gift. How do you get rid of this/will it go away when burned?

    Hi there,
    Under +iDVD > Preferences+ in the top menu bar, you can unselect the "Show Apple logo watermark" checkbox. As long as that box is unchecked, your DVD will be logo-free.
    Sasha

  • How to get rid of Apple logo in photo book back cover

    When I finish the photo book preparation, at the back flap, there is a "Made on a Mac" & an apple logo. Can I get rid of that? Since this is not a free book, there should be no bundled ads on my personal photo book, right?

    Select the book in the sidebar, click on Settings, and uncheck the box for the logo.
    (36866)

  • How to get rid of IDES logo in the SAPScript Layout PSFC_PRINT_LAY ?

    Hello Guys,
    I am trying to print the standard production order.
    The printout has the IDES logo on top left corner for the SAPScript Layoutset PSFC_PRINT_LAY.
    How do I get rid of it?
    Is there a config setting for that?
    How do I insert my own logo?
    Thanks
    George King

    hi
    I tcode se78 where you have to import your logo from outside to SAP system. and then copy this to the  smartform of PSFC_PRINT_LAY
    but for this you have to consult with ABAPER
    Regards
    Pravin

  • How to get rid of search logos in photographs

    all photos on my home page have a search logo and suggest sites I don't want. How do I get rid of this feature? There are also pop up ads stating I have outdated browser or other annoying lead in to adds. How do I get rid of these or you can keep your browser.

    Do a malware check with several malware scanning programs on the Windows computer.<br>
    Please scan with all programs because each program detects different malware.<br>
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • How to get rid of revolving beachball when I open my MaBook?

    How do I get rid of the revolving beachball when I open my MacBook?

    Do not have anything connected, when the machine is put to sleep except power if needed.
    Do not run any processes before the machine is put to sleep other than the Finder and the startup processes.
    If they persist and it takes longer than 5 minutes to fully wake up, you may need to find out if you have other startup processes that aren't 10.7 compatible.  Look in Apple menu -> System preferences -> Users -> Accounts Login or startup items.  Anything other than iTunes Helper is suspect.

  • How to get rid of Quicktime "image" on top right of converted file

    I just converted a WMV file to both MOV and MP4 formats.  There is a Quicktime graphic on the top right now that looks like a circular button with the play icon in it.  I have a fully licensed version of Quicktime Pro v.7.  How can I get rid of that image (which comes across kind of like a watermark)?

    If you're converting WMV, you're probably using Flip4Mac as part of the QuickTime conversion process. The graphic is likely a Flip4Mac watermark. See: https://discussions.apple.com/thread/6418932.

  • How ndo get rid of tuneupmymac malware that loaded with firefox???

    I downloaded firefox onto my new mac mini and got the malware tuneupmymac and reset search (with a cardboard box icon ).
    I trusted Mozilla, didn't expect malware to come with it. How do I get rid of them? Putting them in the trash doesn't work.
    Thank you,
    newtom

    hello newtom, i don't know where you've downloaded it from, but original mozilla builds form mozilla.org will never come with such crap or bundled software.
    in order to address the issue you might want to [[Reset Firefox – easily fix most problems|reset firefox]] and for further steps see the following articles:
    *[[Remove a toolbar that has taken over your Firefox search or home page]]
    *[[Troubleshoot Firefox issues caused by malware]]

  • How to get rid of "._" files when trans to cell phone?

    I use a microSD to play mp3s on my LG chocolate (I know... i'll get an iPhone one day!).
    The only problem is, if I drag-and-drop 30 songs to the card, when I use it on the phone, I now have 60 items, with 30 of them being duplicate titles with "._"
    in front of the title and no way to delete them. These files do not play, of course. I am thinking they are not really "there."
    I tried loading TinkerTool and showing invisible files on the card,but there was only 1, a DS store(?)file that I deleted. Didn't help. Is there any way to take care of those pesky pseudo-duplicates?

    Charles Williams8 wrote:
    I use a microSD to play mp3s on my LG chocolate (I know... i'll get an iPhone one day!).
    The only problem is, if I drag-and-drop 30 songs to the card, when I use it on the phone, I now have 60 items, with 30 of them being duplicate titles with "._"
    in front of the title and no way to delete them. These files do not play, of course. I am thinking they are not really "there."
    I tried loading TinkerTool and showing invisible files on the card,but there was only 1, a DS store(?)file that I deleted. Didn't help. Is there any way to take care of those pesky pseudo-duplicates?
    <PRE>
    </PRE>
    Hi Charles,
    Do you have an external card reader that accepts microSD media? It might be possible to delete the files this way. They are dirt cheap nowadays - SanDisk makes a 12-in-1 card reader for about $30.
    Just curious - the Chocolate doesn't offer a "Delete" function in its media reader? (I have Verizon myself as well, but that phone never interested me...)
    The "._" files are the resource forks that OS X uses to store additional data, as in a custom icon, for example.
    It's part of how OS X manages files - files have data forks (the actual file) and resource forks (additional data). Assuming that the file has an applicable Windows application to read the file, PCs (in your case, the Chocolate) read the data fork just fine.
    (for example, a Word .doc file created on a Mac will typically open fine on a PC)
    However, Windows currently has no way to translate a resource fork, and thus will report it as a dummy "._filename" with no application to open it.
    Steve

  • How to get rid of apple logo loop off rebut? tried restore.

    I tried the bellow. restored it twice. this morning i tried to update to ios 6.1.2 i'd be updating from like ios 4. something. i had tried to update to 5 but it never would. so i figured i'd give it a try. So i started it. It's said verifying then started. Everything looked like it was working and then it started a loop with the apple logo. it will restart, but only to go back into apple logo. someone suggested this on another page for the same issue. But even this is not working. I've got work, and i've got to get this thing up and running. please help.
    First, turn your phone off: Press both the Sleep/Wake button & Home button at the same time, keep pressing until your phone turns off...black screen...then release. Then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

    Hi there,
    Under +iDVD > Preferences+ in the top menu bar, you can unselect the "Show Apple logo watermark" checkbox. As long as that box is unchecked, your DVD will be logo-free.
    Sasha

  • How to get rid of black screen when playing videos

    When I try to play any videos on PC all that will show is a black screen.
    Can here the audio but video screen is completely black.
    Solutions???

    Hello there JK74,
    Here is a great article for troubleshooting issues with either QuickTime or iTunes playing back videos.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    It might be a bit lengthy but it is pretty thorough.
    Regards,
    Sterling

  • How to get rid of white space when creating a PDF file in dynamics ax 2012

    Hello,
    In Dynamcis AX 2012 we are creating an invoice that is first printed to the screen, but when we convert the invoice to a PDF, white space occurs that our customer cannot have.
    We opened a ticket with Microsoft with the following scope layout:
    As discussed, I am providing you a copy of our scope agreement for your issue.
    Issue Definition: When rendering an SSRS report to screen, report displays as expected. However, when the same report is sent to PDF or printer output, a large white space appears between the header and body of the report.
    We've examined every possible setting in the report design properties using Visual Studio, and nothing has been successful in correcting this behavior. Our client has indicated the proper rendering of certain reports is extremely critical to their business relationships with their clients. They've told us that this problem must be fixed or they cannot go live.
    Scope Agreement: Provide information on the issue of white space showing between the header and body of the report. May have to rescope issue depending on investigation.
    We will now begin working together to resolve your issue. If you do not agree with the scope defined above, or would like to amend it, please let me know as soon as possible. If you have any questions or concerns, please don't hesitate to contact me.
    So after we worked with MS for a bit and gave them more information, the final conclusion came back from them as follows:
    Message: Hello,
    When you examine the report, is the report hiding sections during the print out based on some data condition? IF so, this is going to be returned as By Design. Our current reporting framework will reserve space for the controls even if they are not visible when the report is printed to file (xps, pdf, may even do it if exported to Excel). If this is the case, we don't have anything we can do about it. Development is aware of this issue/limitation, but at this point, we have no workaround for it.
    So the question is:  Have you ever ran across this issue and does Adobe have a potential solution as Micrsoft does not.  Or do you have a potential work around.
    Thanks!
    Allen Shannon

    If you want this to bleed, then you will have to print on oversize paper and trim or find a printer that will print borderless.

Maybe you are looking for

  • Sync errors - Can't read or write to "ipod name " disk - Possible FIX/CURE

    For those that are getting this error while syncing try the following . a . Stop Itunes from starting when plugging in your ipod ( this is temp just while doing the below and can be set back afterwards ) b . plug in ipod and go to " my computer " , r

  • Transaction Code: F.30 (DSO analysis) question

    Hi Experts, I have a requirement where in I need to create a custom program similar to the functionality of transaction F.30. I need to create a report similar to DSO analysis but the grouping is by another field name (BSEG-SEGMENT). My question is W

  • Invalid XML Document in BPEL Human Task - TaskService

    Hi Experts I am getting the following run time error in BPEL console in my bpel process which has got a human task. ================================================================== Invalid xml document.* According to the xml schemas, the xml docume

  • Application Error wintab32.dll

    I am getting this Application Error while working in Flash Adobe CS5 Professional version. The error occurs at different times either while I am attempting to generate a SWF for testing or when I am in ActionScript. From EventViewer>Application Error

  • Is it possible to PXE boot to capture a ref image in SCCM 2012?

    Hello,          I've created a master image via SCCM OSD. I would like to be able to PXE boot and capture that master image. I don't want to use a capture media like USB or CDROM. I would like to automate the capture. My current master machine isn't