How to get rid of the ALOT screen and just have google come up when firefox is loaded

I just want the google search to come up when firefox is loaded

Alot probably was installed when you downloaded/installed some software from the internet. Unfortunately, it is becoming more and more common for these kinds of "extras" (toolbars, security scanners, etc.) to be added to your browser/system/desktop when adding or updating other software, some from very well-know software vendors. You must carefully read information before downloading any "free" software and be very alert during the install process for any opportunity to opt-out of "extras" being installed.
For the Alot problem see:
*http://www.alot.com/toolbar/
*http://www.alot.com/faq
*http://www.pchell.com/support/alot.shtml
You also may need to reset your home page: https://support.mozilla.com/en-US/kb/how+to+set+the+home+page
<u>You ''MAY'' need to reset a preference</u>'''<br />
You may also need to reset preferences related to Alot.com via about:config, specifically the keyword.URL preference -<br />
*Open a new tab or window.
*Type '''''about:config''''' in the URL/address bar and press the Enter key
*If you see a warning, accept it (promise to be careful)
*Filter = keyword.url
*Right-click on the preference below the Filter, and choose Reset
*Restart Firefox (File > Restart Firefox)
*See: http://kb.mozillazine.org/Keyword.URL for details.
'''Other issues that need your attention.'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Shockwave Flash 10.0 r42
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''. Note separate links for:
#**Plugin for Firefox and most other browsers
#**ActiveX for IE

Similar Messages

  • Can I get rid of the underlined hyperlink and just have roll-over links?

    In iWeb 2009, can I get rid of the underlined hyperlink and just have roll-over links?

    You have to put them on the server where you are publishing your site to. Where are you hosting your site? If it's a MobileMe account then you have two options:
    1 - put the photos in a folder, name it "Pics" and put that folder in your iDisk/Pictures folder. Then use the following URL: http://homepage.mac.com/YourMMe_Account_Name/.Pictures/Pic/FileName (don't forget the period before Pictures).
    2 - put the "Pics" folder with image files in your iDisk/Web/Sites folder and use the following URL: http://web.me.com/YourMMe_Account_Name/FileName.
    If you're hosting on a 3rd party server it would depend on if you're using a domain name or not. I'm not familiar with 3rd party servers so Wyodor, Ethmoid or someone that is will need to point the way.

  • How to get rid of the on screen volume display?

    how to get rid of the on screen volume display, it stays on even after reboot. and when i hit the volume button another one shows on top of it.

    Sounds like a key on the keyboard is stuck down. Does it disappear if you disconnect the keyboard?

  • How to get rid of the white screen on ipod touch

    How do I get rid of the white screen on my ipod touch, my power button is stuck.

    Display shows white screen
    Try turning the iPod touch off and then on again.
    If the iPod will not turn off, try to reset it.
    If that doesn't work, try restoring the iPod. See this article for assistance.
    Resetting your iPod
    http://support.apple.com/kb/ht1430
    Restoring your iPod
    http://support.apple.com/kb/HT1414

  • I uploaded beta version of Firefox. jigzone puzzles download is loading multiple puzzles in the same wiindow maybe 20 or more puzzles at the same time. How doI get rid of the beta version and go back to the previsious versions or correct the problem.

    My newspaper downloaded. the download of jigzone puzzle created multiple copies of the puzzle in the same window. I went to safari to see if it was the jigzone website but it downloaded correctly. How do I get rid of the beta version I downloaded this morning or correct this problem. I closed firefox and restarted the computer (IMAX) and problem persisted.

    Did you scroll down on the archive page that was linked in the FAQ?
    I see the following releases listed:
    (Released 3/05/2012) Flash Player 11.1.102.63 (174 MB)
    (Released 3/05/2012) Flash Player 10.3.183.16 (67.3 MB)
    (Released 2/15/2012) Flash Player 11.1.102.62 (174 MB)
    (Released 2/15/2012) Flash Player 10.3.183.15 (67.3 MB)
    (Released 11/10/2011) Flash Player 11.1.102.55 (174 MB)
    (Released 11/10/2011) Flash Player 10.3.183.11 (76.9 MB)
    (Released 9/21/2011) Flash Player 10.3.183.10 (80.5 MB)
    (Released 8/24/2011) Flash Player 10.3.183.7 (74.1 MB)
    (Released 8/9/2011) Flash Player 10.3.183.5 (70.6 MB)
    (Released 6/28/2011) Flash Player 10.3.181.34 (75.7 MB)
    (Released 6/14/2011)  Flash Player 10.3.181.26 (75.6 MB)
    (Released 6/5/2011)  Flash Player 10.3.181.22 (75.7 MB)
    (Released 5/31/2011)  Flash Player 10.3.181.16 (6.3 MB)
    (Released 5/12/2011)  Flash Player 10.3.181.14 (70.5 MB)
    (Released 4/15/2011)  Flash Player 10.2.159.1 (66.3 MB)
    (Released 3/21/2011)  Flash Player 10.2.153.1 (66.3 MB)
    (Released 2/28/2011)  Flash Player 10.2.152.32 (38.4 MB)
    (Released 2/08/2011)  Flash Player 10.2.152.26 (66.3 MB)
    (Released 11/04/2010)  Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
    (Released 9/20/2010)  Flash Player 10.1.85.3 and 9.0.283.0 (126 MB)

  • How to get rid of the blank screen?

    hi guys,
    i'm creating a project,  in my college.
    i have a problem
    i have a lot of flv files which i have loaded the externally.
    the problem is, between every movie i get a blank screen, which really disturbing.
    how do i get rid of it?
    thanks

    import poster images of your flvs and make the appropriate image visible when one flv ends and while the next is buffering.

  • I downloaded a book on iBook and when I opened it all I got was a gray screen and I can't go back to my library. Help! How do I get rid of the gray screen and go back to my library?

    I downloaded a book on iBook but when I tried to open it all I got was a empty gray screen. I can't do anything. How do I go back to my library? There are no icons, nothing.... Help

    If tapping the book doesn't give a button at the top left to go back to your Library, then try closing the iBooks app completely and see if it works when you re-open it : from the home screen (i.e. not with iBooks 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How can I get rid of The Grey screen and boot my macbook?

    Today I was on my MacBook Pro (bought July 2011) and it went to a blank blue screen. I powered it off and tried to restart it. It loaded the apple and spinning circle but it went to a grey screen and froze there. I've read and tried a lot of different things already but nothing has worked. I did the hardware test and it found no problems. I tried to safeboot it.  I tried everything on here: http://support.apple.com/kb/TS2570 except the last suggestion (I'd rather not have to lose all my files unless absolutely nesseccary). I also tried the "hold Command + R keys" to try and get to utilities. Anything else out there that I could try? Not sure what the exact operating system is either.

    I wouldn't assume that's the hard drive. The fact that the screen turned blue all of a sudden isn't necessarily an indication of a hard drive failure. Check out this post I made yesterday:
    https://discussions.apple.com/message/21756819#21756819
    My personal opinion would be to try and boot from an external hard drive with the appropriate OS installed. With a 2011 model, I would assume that should be Snow Leopard or later. AHT doesn't catch everything, and I don't know if it even does drive scans for bad blocks. I do know for a fact that it pretty much limits itself to digital interfaces and can't go beyond analog driver stages. For example, if the driver stages of a FireWire port or ethernet port are blown, AHT will report them as being OK.
    If you got hit by a transient, which could indicate an internal supply problem or a line problem if you were connected to the internet via a wired connection or you were running off the charger, there's no telling what it might have caused the drive to do (if it's the drive) and it could easily cause the screen to suddenly go to blue, but what other damage was done?
    My point is that you need to confirm what the source of the problems are. If there's a logic board problem, your drive and data may be OK. If the drive is bad, some of it may still be recoverable. The problem may very well be drive related, but I wouldn't go out and start throwing money at new parts without first confirming what the cause of the problems is.
    Hope this helped, and good luck.

  • How to get rid of the white screen

    is there anyone who can help me?
    problem is the white screen at the startup and i have no cd or dvd with op system.
    someone has changeng in my imac settings of the hdd.

    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • HT5463 my incoming calls will not ring when locked. how do I get rid of the lock screen and passcode for good?

    I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
    I need to hear all my incoming calls.

    Double check settings - do not disturb - is off.

  • How to get rid of the iTunes V5 and revert to V4.9

    A mass of postings has been prompted by the launch of the appalling iTunes Version 5. This has clearly not been beta tested (or the testers need sacking), and must have caused immense damage to Apple’s reputation. How they can sit there like a rabbit in the headlights, and not even revoke the launch of V5 until they’ve sorted it, is quite beyond me.
    Most postings are desperate pleas for help, followed by suggested courses of action to persuade V5 to work. Some of these are quite complex for the average user and, whilst they have been a salvation for many readers, appear not to have worked for others. If, like me, you think that enough is enough, and just want to get back to V4.9, then here is my suggestion.
    V4.9 is still currently available, but the installer refuses to run if you’ve installed V5, because it tells you that “A later version of iTunes is already on this machine. Installation cannot continue.” Attempts to uninstall V5 via Windows “Add or Remove Programs” appear to have got some users into serious difficulties, and I certainly wasn’t prepared to attempt it, so here is what worked for me. Please bear in mind that it only works if you Saved, the V5 Installer, rather than just running it without saving. Bear in mind also that you will have to recreate any custom Play Lists, and that the “Purchased Music” record will be empty (the music wilI still be there though, which is all that matters.
    I offer no promises that this will work for you.
    First I played safe by backing up on DVD my iTunes folder from My Music although, with hindsight, I didn’t need to. If you want to be safe, but can’t burn a DVD, then just open a new file in My Music called iTunes Backup, and copy everything to there.
    Then I did Start/Search for “iTunesSetup”. If you find more than one, then go for the one whose date coincides with the day you were lured into doing the upgrade. That event should be scarred on your memory.
    I double clicked on the offending installer, and encountered a request to know whether I wanted it to Repair or Uninstall. I chose Uninstall, and it worked. I then dealt it the final deathblow, by deleting that actual iTunesSetup program.
    I then went to www.techspot.com and typed “iTunes” into the Search box at top right of the Home Page. This will take you to a page offering Apple iTunes 4.9 for Windows Download. Click on that, and proceed with the download, using the Save option, before running it.
    I was then able to run the new Installer, and iTunes was up and running, but of course, my Music Library was empty.
    Leaving the iTunes main screen open, I went into My Music / iTunes and opened the “iTunes Music” folder to reveal the various ‘Artist’ folders. I then reduced the size of that window, so that I could get at the iTunes window behind it.
    In the iTunes Music window (the one with all the Artist folders now displayed) I did “Select All”, from the “Edit” drop-down menu, and then did a simple drag and drop into the large right-hand iTunes window. Note: there is no need to open the individual ‘Artists’ folders. iTunes will see to that.
    Seconds later I was playing my music, and actually went into the Music Store, and bought some more (not that Apple deserve my custom).
    I shall not be upgrading again, until I have seen plenty of approval notices in the media.
    Good luck if you want to try it.

    Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

  • How to get rid of the green screen from BrinH

    Using Windows 7 with Firefox 33, Internet Explorer 11 and Flash Player 15.0.0.189. Each time I try to play a video instesd of the start playing arrow a green screen opens, the audio plays for about 30 seconds and then stops. I have to use Task Manager to close the page. I have uninstalled and then reinstalled Firefox,IE and FP with no effect. Any help would be appreciated

    Sounds like a key on the keyboard is stuck down. Does it disappear if you disconnect the keyboard?

  • P67A-GD65 (B3) How to get rid of the boot screen

    The issue is what the topic title says.
    I'd like to see just POST info on boot, don't need any image. Is it possible with the GD65 UEFI BIOS?

    It's amazing how manufacturers can fool users sometimes with such tricks. English manual is much more full and descriptive than international/multilanguage one.
    But I wonder how could I miss that option while I was setting boot sequence for my system 
    Thanks a lot, problem has been solved now.

  • We have two different iTunes accounts the old one is an e mail we don't have anymore how do I get rid of the old one so it doesn't come up when I want to update or download an app I've had before? Just want to use the the new account and do away with old

    We have two iTunes accounts we don't want to use our old account cause the password doesn't work how do we just use our new account? The problem is when we update apps it will ask for our password to our old account and when we go to down load an app we have had before it wants to go thru our old account now do we only use new account?

    Welcome to the Apple community Todc.
    Besides signing out of the account, you will need to delete the apps on the device that were purchased under that ID.

  • How to get rid of the unnecessary 'Open' and 'chan...

    I have just bought a 6630 model and am appalled at the software. In the past Nokia wiped the floor with Ericcson because its software was so simple and quick to use. Now I have to go through all these menus to get to what I want. For instance, why do we have to keep pressing 'Open' and 'Change' options when it is obvious we want to use these functions. Any way to customise these and turn them off?

    You can most often just take the default action by pressing the "joystick" center button (without going through the menus).

Maybe you are looking for

  • BW Query variable default value put in Crystal report variable question

    Why BW Query variable default value put in Crystal report variable for BO InfoView to open crystal report. I using Analyzer to open bw query,variables had default value ,but crystal report can't had variable default value ,and can't search variable 

  • Looking for a book that would teach me Java from the ground

    Hi! I'm a high school student looking to learn a lot about Java Programming. I'm taking Computer Science III right now and I took Computer Science I last school year (My school don't offer Computer Science II). However, my Comp. Sci. I teacher was re

  • Display correct date format in report

    Hi All, I have a key figure date type and when I display the report, this field shows a number format and not a date format as i wish. Can you help me with this issue? Any idea? Thank you in advance. Regards, Bruno Rodrigues

  • Calling unix shell script from SAP

    Hi, 1. i created command in SM69 as Zshell. 2. i pass this command to FM SXPG_COMMAND_EXECUTE. it is working fine when the file is having read write execute permisson on unix level. but the problem is my unix administrator he don't want to give this

  • Loop summary

    Hi - I'm new to all of this and I have a time sheet that is giving me a headache! Windows 7, Adobe LiveCycle Designer 8.  The Code list has 4 variables W,V,S,H   based on what is selected in the Code column (drop down) the hours worked total for each