How to get rid of the white lines on playback screen?

What are those two square lines on the playback screen? How do I get rid of them?

You will have to click on the top menu and choose options see below
when you do this window will pop up and you scroll down until you get to the front panel options. See below
Tim
Johnson Controls
Holland Michigan

Similar Messages

How do I get rid of the white line outlining my tabs in the toolbar?

Ever since I downloaded the latest version of Firefox, I have this ugly white line slicing through my toolbar and outlining my tabs. I also use Firefox themes so this is extremely annoying to see in my interface. Does anyone know how to get rid of the damned thing? I am also operating on a Mac. Nothing that I find off the Internet about this issue seems to help.
== This happened ==
Every time Firefox opened
== I downloaded the latest version of Firefox 3.6.3

abdezines wrote:
> firstly, and most importantly, a link to my site.
http:/www.abdezines.com
>
> i am wondering how to bring my design up to the edges on
the page, just like
> this site. when i designed the table the cell pad
boarder etc was all set to 0
> so where have i gone wrong?
Hi
You need to add that following rule to your CSS file:
body {
margin: 0;
padding: 0;
border: 0;
Cheers jojo
Adobe Community Expert for Dreamweaver 8
http://www.webade.co.uk
http://www.ukcsstraining.co.uk/
Extending Knowledge, Daily.
http://www.communityMX.com/
Free 10 day trial
http://www.communitymx.com/joincmx.cfm

How do get rid of the white option ball on home screen?

how do you get rid of the white option ball on home screen?

I've never seen a "white option ball" on the home screen.

How to get rid of the white screen on ipod touch

How do I get rid of the white screen on my ipod touch, my power button is stuck.

Display shows white screen
Try turning the iPod touch off and then on again.
If the iPod will not turn off, try to reset it.
If that doesn't work, try restoring the iPod. See this article for assistance.
Resetting your iPod
http://support.apple.com/kb/ht1430
Restoring your iPod
http://support.apple.com/kb/HT1414

How to get rid of the reference lines on the front panel

I forgot how I created a couple of horizontal and vertical reference lines on the front panel. It looks like the origin lines on the front panel. When I move my program to another monitor with different resolution, all the layout is messed up because of the reference lines can not change with the resolution. Did anybody meet this before? How to get rid of them?
Attached are the 2 creen shot of front panels.
Thanks in advanced.
Solved!
Go to Solution.
Attachments:
front panel.png ‏63 KB
front panel2.png ‏42 KB

You will have to click on the top menu and choose options see below
when you do this window will pop up and you scroll down until you get to the front panel options. See below
Tim
Johnson Controls
Holland Michigan

How to get rid of the dotted line border?

I have created an interactive pdf in InDesign (v9.1) containing a series of buttons. When the file is exported to Accobat Pro (v11.0.04) all the buttons have a dotted line border when they are clicked. How do I get rid of the border?

Sortedmy own proble!. Go to preferences, forms, & uncheck 'focus rectangle'

Can anyone tell me how to get rid of the white stripe?

There is a narrow white stripe just above the container on this site and I can't figure out how to get rid of it. Do you know? http://lowellforte.com/
It doesn't appear above the right sidebar which is yellow right now. Thank you.

You could also try positioning the image using a code like this:
body {
background-image: url('http://lowellforte.com/images/1264xindex.jpg');
background-position: 1264px 963px;
Change the dimensions to suit your style. 963px is chosen here because the stripe is about 5px give or take 1px either side.

How to get rid of the white screen

is there anyone who can help me?
problem is the white screen at the startup and i have no cd or dvd with op system.
someone has changeng in my imac settings of the hdd.

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

How do you get rid of the white lines between cells on a table?

I've looked everywhere and set every line I can find to none. Also, is there a way to get the tools back at the top of the document???

MGMGMG02 wrote:
I've looked everywhere and set every line I can find to none.
Inspector > Format > Cell > Border: select no border from the dropdown menu then click the relevant border from the selector:
Also, is there a way to get the tools back at the top of the document???
Update to version 6.1 and the tool bar buttons are returned.

White line appears on jpeg export in indesign CS6? How to get rid of the same?

White line appears on jpeg export in indesign CS6? How to get rid of the same?

Please find attached actual jpeg and the screen shot of settings at which the jpeg is exported.

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
1. Make the path shape you want to apply the sponge effect to.
2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
4. Apply the sponge effect to the OUTER path.
5. Highlight BOTH paths, and create a MASK (command or alt-7).
Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
This works with any Document Raster Effect Settings dpi.

How do i get rid of the white screen on my ipod touch

How do i get rid of the white screen on my ipod touch?

Try a hard reset. If that does not work, let the battery completely drain, recharge and test.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How do you get rid of the white part of an image?

I have some JPEG's of textures. Around the edge of the texture their is white, how do I get rid of the white so I can work with just the texture?
I tried the Luma Key filter. It worked pretty good but wanted to know what you guys do. If their is a way to get rid of the background white color without disrupting the texture image?
As always Thanks for all your help!
-marco

It is just around the outer edge.
Here is a look at the textures I downloaded:
http://www.bittbox.com/freebies/free-high-res-texture-pack-the-anatomy-of-a-real ly-old-book/
(Someone made great copies of a old book.)
Thanks for your help ThatChineesYouth.

When capturing video; how do I get rid of the green lines at the bottom of the frame?

When capturing video; How do I get rid of the green lines at the bottom of the frame?

s.haider
You have Canon ZR950 mini DV Camcorder, why not make a firewire connection and do DV data capture into the Premiere Elements 8.0/8.0.1 Capture Window?
Do you have any reference for what you are attempting to do or is this a creation of your own? Could you confirm what you describe as "just capturing video".
a. From your information, you are doing Get Media/Webcam or WDM Device with the Capture Window showing the Capturing Device as "Dazzle DVD 100 Video Device". What type of connection are you making between the Canon ZR950 and the Dazzle DVD 100 and the computer?
b. What exactly do you expect to be putting on the Premiere Elements 8.0/8.0.1 Timeline from this capture...DV AVI or something else?
Coming from the perspective of Premiere Elements 8.0/8.0.1 known issues, I would ask you to consider:
a. Remove the check mark next to AutoAnalyzer in the Capture window. Even if you were doing this Capture the "usual way", that is highly recommended.
b. Go to Edit Menu/Preferences/General, and compare your results with and without a check mark next to enable GPU playback. As a cross reference, please go to Edit Header/Effects/Video Effects and detemine if there is a category of Effects named GPU Effects. Do the same thing for Edit Header/Transitions/Video Transitions and determine if there is a category of Transitions named GPU Transitions.
And, the general drill for all users of Premiere Elements 8.0
a. Are you working with the automatic Background Rendering and AutoAnalzyer Features turned Off?
See Premiere Elements workspace Edit Menu/Preferences/General for background rendering option and Elements Organizer workspace Edit Menu/Preferences/AutoAnalzyer Options for AutoAnalzyer options.
b. Are you working from the 8.0.1 Update version of the program?
Please consider.
We will be watching for the outcome.
Thank you.
ATR

I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

I am getting blocks of black, vertical broken lines to right of cursor, around applications on desktop and over text on internet. I recently updated from OS X Tiger to Leopard on my G5 powermac. Can anyone advise how to get rid of the blocks of lines?

What graphics card is installed?
Have you looked inside to see if the interior is dusty?
Is the graphics card dusty?
If equipped, is the fan on the graphics card turning?
Leopard uses the graphics card harder than Tiger, so weakness in the graphics card is more easily shown.

How to get rid of the white lines on playback screen?

Similar Messages

Maybe you are looking for