How to get rid of website popups

I try to click at something and then all of a sudden a tab opens up and its an ad to clean my macbook air. It is really annoying. How can i remove these websites form coming up??!

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Similar Messages

  • How to get rid of websites on the reading list?

    I need help getting rid of websites on my reading list. Please help

    click on the spectacles, then hover over the links in the list. As you do that a little "x" appears in the top right.
    Click on that and it goes away. Now if you can show me how to get rid of the reading list option and stop if from collecting links I accidentally put there, that would be something. lol

  • How to get rid of unwanted popups

    Every time I open a website, there are annoying popups that would show up. Sometimes it would also ask me to allow or trust a certificate, which I am unsure of. I would really want to get rid of them because I am quite concerned that it may be a virus or something. I just wanted any advice whether I can do something about it on my own or do I have to go to the apple store to get further help.
    Please help!

    Sometimes it would also ask me to allow or trust a certificate, which I am unsure of.
    You should never permit the installation of something you are unsure of.
    You may have inadvertently installed adware. You do not need to download or install anything to fix it.
    For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • How to get rid of adobe popups that say adobe wants permission

    How do I remove the adobe popups that ask me to decline or accept adding something to my system?  I can't watch any news videos or online movies.  Does anyone know how to remove them.  Neither of the buttons work.

    Go directly to Adobe and update your version of Flash:  http://www.adobe.com/products/flashplayer.html  Do not use the popup windows from other websites as they may be phishing for personal information.

  • With FBA, How to get rid of Login popup while opening document in library

    I've enabled fba with custom login page.
    I've document library.While trying to open document, it asks for credentials everytime. Due to FBA with custom login page, it does not close the login popup automatically.
    How can I get this resolved?

    irst Enable Client Integration.
    Next U Activate the Site Collection Features
    "Open Documents in Client Applications by Default"
    and Deactivate "Office
    Web Apps".
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/6e823898-f423-4af2-b43d-b43b2fc14409/open-microsoft-office-documents-in-sharepoint-2010-fba-without-login-prompt
    Or
    1) no need to do coding for checking the checkbox 'remember me' on loginpage
    2) on central admin, for the extended zone "UNCHECK" Enable Anonymous access & select "YES" in 'Enable Client Integration'-->You are all set--> these resolves
    2 problems: 1. the users will not be asked to login 2 times 2. when they open office document they will not receive any authentication window
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/6dc1c682-371f-4a7d-b26c-4c09fc724189/sharepoint-2010-fba-asking-authentication-when-trying-to-open-a-excel-or-word-document-for?forum=sharepointadminprevious
    http://blogs.technet.com/b/steve_chen/archive/2010/06/25/multiple-logon-while-open-office-document-from-sharepoint.aspx

  • How to get rid of this popup...ODSLockout..thank you

    HP w1907...RK283AA..vista..OSDLockout.....none done in number 4.

    Hi,
    Try the below suggestions:
    OSD Lockout is displayed.
    The monitor's OSD Lockout function is enabled.
    Press and hold the Menu button for 10 seconds to disable the OSD Lockout function.
    Try a monitor reset. Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How can i get rid of mackeeperapp popup

    I need help to get rid of mackeeperapp popup. Since approx. 2 weeks it opens whenever I use google search machine after I chosen a topic there. Then the website of mackeeper opens up in a new window trying to persuade you to download their programme. I've downloaded adblock, but didn't get rid of mackeeper; used duckduckgo instead of safari, it didn't help either. Any suggestions how to get rid of that popup?

    Check the links below for options to remove the Adware
    http://www.adwaremedic.com/index.php
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • How do i get rid of mackeeper popup

    How do I get rid of mackeeper popup?

    Majbrit wrote:
    I (like you mentioned) was having a "Could not find server" problem when trying to install AdwareMedic.
    In that case, you have the Downlite (aka VSearch, aka DynamicPricer) adware installed at a minimum. See:
    Adware blocking AdwareMedic downloads!
    If that page is blocked as well, see:
    About the Downlite adware
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Why do I now have a Yahoo toolbar after the last update and how do I get rid of it? Also, get rid of the popup asking me if I want to change my homepage?

    About a week or so ago, I received the familiar pop-up message asking if I wanted to update Firefox. I said yes but since then I have acquired a Yahoo toolbar (I never use Yahoo but don't know how to get rid of the damn thing). Also I am now getting a pop-up box asking if I want to change my home page. How do I stop this as well?

    Tap the bookmarks icon in Safari (looks like an open book), then tap "Favorites".  Edit the second row out of there.

  • How to get rid of pop-ups on my macBook air?

    One of my roommates recently downloaded torrent on my macbook air to watch a movie, and since then I have been experiencing popups every time I open a new page on safari. Also, my search engine has switched to something known as search-quick? I've tried a few different mac detox sites to no avail. Very frustrated. Any suggestions on how to get rid of this "virus" and pop-ups would be much appreciated!

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the word something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same word you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Amost every page I open, Firefox asks whether to enable Flash player. How to get rid of this nagging pest ?

    Amost every page I open, Firefox takes a line off my netbook screen to ask whether to enable Flash player.
    How to get rid of this nagging pest ?

    downloaded 17MB flash installer from Adobe website.
    This download did not run properly, reporting that it had some error.
    Still plagued with FireFox queries about Flash.
    Don't much care about having flash plugin in FireFox.
    Prefer to download a flash file, scan with virus checker, then play it with VideoLAN.
    So I disabled Flash plugin to "Never Ask" but still the noxious popup
    "FireFox has prevented the outdated plugin "Adobe Flash" from running on helpx.adobe.com. Continue Blocking ? Allow ... X"

  • Cellular Data for Podcasts pop-up - how to get rid of (iOS7)

    I am downloading all of my podcasts to my iPhone 4 (iOS7) through iTunes on my iMac. Before iOS7, I did this and listened to them in the Music app - it was all really straightforward. iOS7 forces me to use the Podcast app. I'm still not sure if I'd doing the sync/download from iTunes correctly as sometimes the episodes appear on the phone and sometimes they don't (and I'm the one who usually figures these things out and tells my other family members how to do it), but that's a whole different story.
    Because I do not want any podcasts automatically downloaded to the phone, especially over Verizon's network, I turned off Settings -> Podcasts -> Use Cellular Data. I have also turned off Sync Subscriptions.
    Whenever I am not on a WiFi network and I unlock my phone while it is in the Podcast app, I get a popup that says:
    Cellular Data is Turned Off for "Podcasts"
    You can turn on cellular data for this app in Settings.
    And I have to "OK" it to make it disappear. It is getting annoying. I know cellular data is off. I did it on purpose.
    My goal is to get rid of the popup but I've had no luck yet after tweaking a few settings. I don't know exactly what Sync Subscriptions does, but one educated guess is that as long as I have that off, no podcasts will be downloaded to the phone unless I do so via iTunes on my iMac. Is that correct, and would that allow me to turn on Use Cellular Data (to get rid of the popup)?
    Any other ideas about this?
    And if someone can explain all of the different permutations of how to manage Podcasts between iTunes and an iDevice (or even when a computer isn't in the picture), I'm all ears.

    None of the tips suggested above worked for me. I still had that infernal message about connecting to the internet. But I have apparently (crossing my fingers) found a solution which works for me.
    In the good old days I had iOS6 on my iPhone 5 with iTunes 10. I created a Podcast playlist in iTunes and I could cheerfully listen to it on the Music app driving around Europe (I'm on a UK tariff) with no 3G or wifi.
    I now use iOS7 on my iPhone 5, syncing with iTunes 11 on Mavericks. I can now listen to the same Podcast Playlist with the Podcast app, wifi and Cellular Data turned off, Cellular Data and Notifications turned on everywhere and not a trace of the warning message. All the Podcasts play in sequence with no problem. Victory?!
    The problem turned out to be in the syncing with iTunes. Although the Podcasts, whether in the Playlist or not, appeared to be syncing, in fact they were not imported fully into the phone. Thus when I selected a Podcast to play, the full file wasn't actually on the phone and so it wanted to stream it.
    My solution was achieved by doing the following.
    1. Create Podcast playlist in iTunes and drag some podcasts into it.
    2. Wiith phone connected to iTunes device, highlight the iPhone in the left hand column and swivel the little arrow to expand the list of contents. You can then check the actual contents of each section on the phone. Music, Movies, TV Shows, Podcasts etc.
    3. Hit iPhone in left hand column. Hit Podcasts tab at top of window. Uncheck everything in and out of sight and Apply/Sync to remove all Podcasts from phone.
    4. Hit Podcasts section of expanded iPhone contents list in left hand column. That should be empty. Similarly there should be no sign of the Podcast playlist below it.
    5. Now return to the Podcasts syncing section. Check 'Sync Podcasts'.
    6. Scroll to bottom of page to 'Include Episodes from Playlists' and check the Podcast playlist you created. Apply/Sync.
    7. Now check that the Podcasts in the playlist are in the phone by hitting the Podcast label in the expanded contents list. It should match the contents of the Playlist which should also have appeared in the list of playlists in the phone.
    8. With WiFi and Cellular Data turned off, go to Podcast app and, if you're as lucky as me, you should be able to play any of the Podcasts in the playlist without that infernal message being displayed. Displaying 1 or 2 fingers at your mobile provider is optional!

  • How to get rid of the Unwanted background shadow

    I created a popup (in DataGrid).  However, when th popup DataGrid displays, the backgroun becomes shadowed (see the image).  Anyone knows how to get rid of it?  Thanks.
    <?xml version="1.0" encoding="utf-8"?>
    <mx:VBox
    xmlns:mx  ="http://www.adobe.com/2006/mxml"
    borderColor  ="#6CC417"
    borderStyle  ="solid"
    dropShadowColor  ="#F9B7FF"
    dropShadowEnabled ="true"
    shadowDirection  ="right"
    shadowDistance  ="10"
    >
    <mx:Script>
    <![CDATA[
    import mx.containers.Grid;
    import mx.events.FlexMouseEvent;
    import mx.events.ListEvent;
    import mx.managers.PopUpManager;
    import com.esri.solutions.flexviewer.widgets.PopupForms.Popup_HomeState;
    private var popup:Popup_HomeState;
    private function itemClickEvent(event:ListEvent):void {
    var iIndex:int = event.rowIndex;
    var sItem:String = dg.dataProvider[iIndex].col1;
    showPopup(sItem);
        popup.addEventListener(Event.CLOSE, closePopUpWindow);
        popup.addEventListener(FlexMouseEvent.MOUSE_DOWN_OUTSIDE, closePopUpWindow);
    public function showPopup(s:String):void {
       if(s == "Home State" || s == "Unit State") {
    popup = PopUpManager.createPopUp(this, Popup_HomeState, true) as Popup_HomeState;
    PopUpManager.centerPopUp(popup);
    private function closePopUpWindow(evt:Event):void {
        PopUpManager.removePopUp(popup);
    ]]>
    </mx:Script>
    <mx:VBox>
         <mx:DataGrid id="dg" width="360" height="176"
          rowCount="8"  showHeaders="true"  itemClick="itemClickEvent(event)"  >
             <mx:columns>
                 <mx:DataGridColumn dataField="col1" width="120" headerText=""
    itemRenderer="com.esri.solutions.flexviewer.widgets.myForms.DGRenderers.ImageRenderer"  />
                 <mx:DataGridColumn dataField="col2" width="260" headerText=""/>
             </mx:columns>
         </mx:DataGrid>
    </mx:VBox>
    </mx:VBox>
    --------------------- Below is Popuup_HomeState.mxml
    <?xml version="1.0" encoding="utf-8"?><mx:VBox  xmlns:mx ="
    http://www.adobe.com/2006/mxml"borderColor ="
    #6CC417" borderStyle ="
    solid" dropShadowColor ="
    #F9B7FF" dropShadowEnabled ="
    true" shadowDirection ="
    right" shadowDistance ="
    10" 
    >
    <mx:Script><![CDATA[import  
    mx.containers.Grid;import  
    mx.events.FlexMouseEvent;import  
    mx.events.ListEvent;import  
    mx.managers.PopUpManager;import  
    com.esri.solutions.flexviewer.widgets.PopupForms.Popup_HomeState; 
      private  
    var popup:Popup_HomeState; private  
    function itemClickEvent(event:ListEvent):void { var iIndex:int = event.rowIndex; 
    var sItem:String = dg.dataProvider[iIndex].col1;showPopup(sItem);
    // register event listeners for closing the popup window 
    // when the popup window close button is clicked...popup.addEventListener(Event.CLOSE, closePopUpWindow);
    // or when an area outside the popup window is clicked...popup.addEventListener(FlexMouseEvent.MOUSE_DOWN_OUTSIDE, closePopUpWindow);
     public  
    function showPopup(s:String):void { 
     if(s == "Home State" || s == "Unit State") { 
    //helpWindow = PopUpManager.createPopUp(this, Popup_HomeState, false); popup = PopUpManager.createPopUp(
    this, Popup_HomeState, true) as Popup_HomeState;PopUpManager.centerPopUp(popup);
    // method to close the popup window on close or mousedownoutside eventprivate  
    function closePopUpWindow(evt:Event):void {PopUpManager.removePopUp(popup);
    ]]></mx:Script> 
     <mx:VBox>
     <mx:DataGrid id="dg" width="360" height="176" rowCount="
    8" showHeaders="true" itemClick="itemClickEvent(event)" >
     <mx:columns>
     <mx:DataGridColumn dataField="col1" width="120" headerText=""itemRenderer="
    com.esri.solutions.flexviewer.widgets.myForms.DGRenderers.ImageRenderer" />
     <mx:DataGridColumn dataField="col2" width="260" headerText=""/>
     </mx:columns>
     </mx:DataGrid>
     </mx:VBox>
     </mx:VBox>

    Problem solved by change the
    popup = PopUpManager.createPopUp(this, Popup_HomeState, true) as Popup_HomeState;
    to
    popup = PopUpManager.createPopUp(this, Popup_HomeState, false) as Popup_HomeState;

  • How to get rid of the "s" in http

    how to get rid of the "s" in http

    As Kurt Lang says, https is secure http and is frequently determined by the website you are visiting.
    However, there is a EFF HTTPS Everyware browser plug-in that will attempt to force https if possible (EFF - Electronic Frontier Foundation).  Did you by any chance install the HTTPS Everywhere plug-in ?

  • How to get rid of file name that pops up with mouseover?

    When a user is on my website and mouses over a link to another page, the name of that page comes up - for example, if I mouse over the link to the Mums Night Out page (while on the home page) the file name pops up (mumsnightout.html)
    Any idea on how to get rid of that annoying issue?
    Thanks,
    roxpat

    Is this question now solved?
    Excuse me if it is, but I am really freaking out about this and don't know what to do.
    I don't want to launch my website before everything is perfect and I really want the yellow-pop-up-box-bstrd to go away.
    I am using this code which works fine in ff and safari but not in ie:
    <script type='text/javascript'>
    function clearTooltip() {
    _links = parent.document.links;
    for (i=0; i<_links.length; i++) {
    _links.setAttribute('title', '');
    chkFooter = setInterval('checkFooter()', 100);
    function checkFooter() {
    if (parent.document.getElementById('footer_layer') != null) {
    clearTooltip();
    clearInterval(chkFooter);
    </script>
    Should I modify it in some way? Any ideas?

Maybe you are looking for

  • How can I reformat my external hard drive from the time machine format to regular format?

    Ok so when first starting out I got an external hard drive for my time machine, little did I know I would run out of space really fast and would need to buy a bigger and better hard drive. Now that I did that, I have my old hard drive that I would li

  • How to get Image Coordinates in a Frame

    Hi, I want to retrieve Image Coordinates contained in a Frame. I am able to get the frame coordinates through IGeometry but not the images. Any help will be highly appreciated. Regards, Rahul Rastogi

  • [SOLVED] Connection problems on Atheros AR5001X+

    Hi all. I've been having trouble with my internet connection. I think it happened after the last kernel upgrade. I am using wicd and starting it with X. When I log in I get no connection at all and a message saying "No wireless networks found". Resca

  • Can I use the 3 RCA plugs?

    Hi, so.....just found I can bypass the computer to listen to our 1st iPod by plugging directly into the computer speakers. Now, does that also mean I can use 3 wired RCA plugs (2 for L+R channel into home stereo and video directly to the tellie)? Thi

  • Flash Player Not There After Install

    I have installed Flash Player several times & it always says it was successful, but when I need it, it says I have to install it.  It's not listed in my Programs but it is showing up in the Control Panel under Programs that can be uninstalled.