How to get rid off custom installed theme completely and revert back to mavericks theme(system default)

Recently, I tried installing a third party theme in my macbook pro (OSX mavericks_10.9.5 installed). Once installation got over i could notice that it was not properly installed in my retina display so i thought of reinstalling the same. Re-install could not be done properly because the theme was a hacked version. The installer theme packages effected the GUI of my system and thus it upgraded some of my core services applications to its custom theme format. So is there any solution to revert those services back to its default state.? Or is there any any way to get these installed format back to older format(icons and stuffs).?Or will it resolve the issue if i try installing the new OSx Mavericks (Productivity tool) from the AppStore?.Please let me know if you guys have got something the issue.
Please help me.

Paul--you are a life-saver!! Worked great. I did have to look around to make sure I was getting 4.9 instead of 4.7 (even when the file was named 4.9 at techspot.com), but I finally got the right file, did the install as you suggested, and everything is now fine. One note, though, that I haven't seen mentioned in any of this thread: when I first tried to open up iTunes after getting back to 4.9, the following message appeared: "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes." I merely went to the old .itl file that was created when I did the update to iTunes 5, renamed it, moved it over to my now new 4.9, and iTunes opened fine. My library was a few days out of date, because of the few days' lag from the time I did the iTunes update, but that was easily taken care of, and everything's now working fine. Thanks again!!!

Similar Messages

The question as to how to get rid of Firmware notice was completely and successfully answered.

How to get rid of the notice on printer screen that'The Firmware updat is on the server was completely answered by the advice given.Howard Peak

Unfortunately CleanMyMac is as harmful, if not moreso, than MacCleanse. These third party cleaning apps are considered 'crapware' and can harm your system beyond repair. If you cannot uninstall them completely, as appears, it may pay to backup your data, reinstall avericks and migrate your important data back. You can try posting an etrecheck report and perhaps someone can help narrow down what you need to trash from all the areas that these programs have infected.
etresoft a long time contributer to Apple Support Communities wrote a very useful app he called etrecheck which helps in diagnosing many problems caused by third party installs etc.. Go to his website, read his information and from there download and run the program according to his instructions
http://www.etresoft.com/etrecheck
Cheers
Pete

HT4528 Is there any way to get rid of the recent iphone upgrade and revert back to default settings? Since upgrading I have experienced nothing but problems with Siri.

Since selecting the prompt to upgrade my iphone4s, I have experienced significant problems. The "old" Siri disappeared and the new one is slow, ineffective and unavailable much too frequently. The faded colors on my iphone screen are also troublesome. I wish that I could revert back to the default settings
on my iphone4s. Has anyone else experienced the above problems?

Apple does not support downgrading to a previous iOS.
You might first try a reboot:
press and hold the home and power buttons until the Apple icon is displayed, then let go.
If it doesn't help, try
Settings>General>Reset>Reset all Settiings.

How to get rid off 'long frames'

when I import a movie into FCP and I use the tool 'long frames: mark';
marks many long frames in parts of the movie.
how to get rid off 'long frames'?
thanks
carlos

Long frames are frames whose duration is too long... however sometimes it doesn't matter as you don't see the problem in playback, so if you don't see a jitter there or something, I'd not worry about them.
Dropped frames are frames that are OK, however (usually) your drives can't play them back because they are too slow... they drop a frame to get to the next... this will look worse than long frames do usually.
All that said, if you don't see a problem, you don't have one. Dropping frames is worse though, and I'd suggest that you keep these media files on a fast drive system other than your startup disk. The data rate of the video will determine whether or not you need to use faster disk drives. SATA internals for example will handle 8 bit uncompressed files, but not 10 bit... FW drives range a lot in what they can handle, and the spec should always be MUCH faster than what the data rate actually is. For example, I use G-Raids for 8 bit uncompressed, and 4 gig fibre channel array for HD files. But FW 400 and 800 single drives work great all day long for DV res files, and the fastest of the 800's will handle 8 bit uncompressed if you don't fill them to the brim.
Jerry

Can anyone explain to how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this it is driving me nuts

can anyone explain to me how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this i want to get rid of it it is driving me nuts

What do you have checked in Firefox Preferences>General?
Ciao.

Pls. let me know how to get rid off this ribbon?

Hello
I am developing an VISITOR Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP) When i opened this VISITOR interactive form in a browser, right clicking and checked form
PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)"
When i executed/run this interactive form, am getting a violet colred ribbon on the top of the form, with a text of "Pls fill out the folowing form. You can save data typed into this form" on left corner "
But, i do not want to get/display/see this violet ribbon on my form, pls. let me know how t get rid off this robbon?

I bet if you Google "iPhone error code 1611" you'll get a clue as to how to fix your problem

How to get rid of the main text box in the back of the page AND move things

I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

Hi, Dylan. Welcome to Discussions.
If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
Also, you can create a text box the width of the page and then set it for 2 or more columns.
When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
Hope this helps to get you started.
Walt

New Imac. I get rid off login password from security and account and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

First, reset your password as follows.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

How to get rid off yahoo search?

when i search something from google search (in a webpage) it goes to the yahoo search website and show the results!
1.) there is no extension on add-ons, anything to do with search or yahoo
2.) i have tried reset the keyword.url from configuration
3.) i also tried to remove yahoo search engine from searchbar (didn't help)
This article didn't help either (same as above though): https://support.mozilla.org/en-US/kb/remove-toolbar-has-taken-over-your-firefox-search?esab=a&as=aaq
And i have avast and malware-program and those doesn't find anything.
No help. Everytime i search something in google, it goes to the yahoo search webpage! how to get rid of this yahoo rubbish?
I have no idea how it came. Maybe something to do with vlc codec pack? "Myfreecodec" that i tried to use when trying to play some mp4-file... i think i haven't installed anything else lately... And i always uncheck the "add this one on your browser..."

Where in my control panel can I find this and uninstall it? I do not see it in programs. Thanks. (I have the same problem and it is making me crazy)

Help: How to get rid off the default Window menu from FORM screen?

Hi,
I am working on a FORM application. On the very top left of the FORM screen, there is a default Window menu with:
Cascade
Tile Horizontally
Tile Vertically
etc.
The end user will never use it for this application. To make the screen look nicer, is there a way to hid or get rid off it?
Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"
Thanks.
Jimmy

Also if possible, I want to hid or get rid off very top "Oracle Developer Forms Runtime - Web"I see you are running with separate frame. In the When-new-form-instance trigger, use
Set_Window_Property(Forms_MDI_Window, Title, "xyz" );
to change the window title.

How to get the Most RECENTLY installed JRE path and version ?

Hello Experts,
I am working on Installshield, and for some purpose, I need to get the MOST RECENTLY installed JRE version and Path. Now I have two choices :
1. Go into the directory " C:\Program Files\Java\" and get the most recently changed directory, ( that will be the installation directory of the most recently installed JRE ). And then search in the registry under : HKEY_LOCAL_MACHINE/SOFTWARE/JavaSoft/Java Runtime Environment/ and look for the version which is having
the value of the key INSTALLDIR as the above found Installation Directory.
But in this approach, I'll never find the Installation dir or version, if the JRE is installed somewhere else than the default location.
2. Now this is the reverse. I first search in the registry, and get the Installation Directories of all the versions installed in the system, and then look at the file attributes ( may be by using some batch file ) and see which one is most recently installed.
My question is, is there any other way, by which I can get the most recently installed JRE's installation Path and version? Or can we trace it during the installation itself ? I mean when we install the JRE, it creates some log files in %TEMP% directory. Is it possible to trace the version and installation directory of the most recently installed JRE from the log file ?
Thanks
Gagan

Rendering times are pretty much based on processor speed if I have that right. Not much you can do about that other than buy a new computer. Your day to day work in the finder and accessing of files would be faster with your boot drive internal. One thing you can do is ensure your FCP System Settings are on the fastest disk you have. If you put a pair of drives internal and made a RAID volume for them you would improve your write speed when capturing and for any other read/write operations. You would have to be sure you kept that backed up properly because you double the odds of a failure when two drives spread the data between them. There are many RAID options.
You could also bump up the RAM but you'd have to look at your processes to see if you are being limited by RAM. I'm guessing not but it's not impossible. If you are accessing scratch disks due to RAM limitations that would be one thing you could do.
I would never bother connecting an external via USB if there was an esata or firewire option. I use an esata card internally to give me access to estata storage. I also keep an external FW800 drive for a mirror backup of my boot drive. All my data and booting is internal with all my backups external. Each internal has an external and I have additional externals that I keep off site to protect against fire and theft.

PSE 7 - Share - Photo Mail - "Default Text" - how to get rid off them?

Happy New Year to you all!
I use PSE 7 (Vista, Home Premium) to send regularly pictures with the "Photo Mail" option under "Share".
In PSE7, just as in the previous versions, I keep getting annoyed by the standard text "Here are the photos I want to share with you". This text is then repeated in the actual mail. I like to have it "blank" and not repeated in the actual mail.
Second, in the generated mail we always get that lovely advertising for Adobe at the bottom of the generated message "I sent these photos using Adobe(R) Photoshop(R) Elements 7.0. Find out more: http://www.adobe.com/products/photoshopelwin/" which, gagin I have to delete everytime. Is the an option somewhere (.ini file or the like, regedit?) to supress this?
Third: That message "Here are...." gets automatically inserted into the subject of the generated message. Again: hot to get rid of this?
Anyone an idea or is this something to post to Adobe's Wish List forum?
Thanks,
Alexander

Go to C:\Program Files\Adobe\Photoshop Elements 7.0|Assets|locale\en_us(or wherever you are)\email\signatures and open the files there in a text editor, delete the ads and save.

How to get rid off iOS6 on iPad 2?

Unfortunately, I updated my iOS on iPad 2 with iOS6. It is very unstable, and YouTube has been removed I am fed up about Apple policy to lock people in their environment (I may go soon on Android)...
Any advice on how to get back to iOS5.1.1??? iOS6 is a sh...
Thanks,
F.

well basiclly apple and google have split up so that means you have to get the youtube app (i know i have a ipad to it *****) and thats why google maps isnt on it and apple maps isnt on it and also apple dosent like downgrades so just dont (i know what alot of peapole are thinking get a download downgrade ) dont get a down grade

How to get rid of guest account from login and lock screen?

After 10.7.2 my login and lock screen shows option of guest account along with the admin account ... how can i get rid of this..

Even when the Guest Account / Access is disabled, the login option / and lock screen, still have a guest login.
This is because in Preferences/ Security & Privacy/General the bottom item is turned on.
Turn on: Disable restarting to Safari when screen is locked

How to get rid of Pop Ups, Pop Unders and YouTube ads

Ever since AdBlock stopped working in Safari, I've searched til no end for another program, or extension, that will get rid of all pop ups, pop unders, and YouTube ads and banners for Safari. Nothing.
This astounds me because I've never known Mac gurus to not be on top of somthing like this. Are there any alternatives? I only use Safari and not Firefox or Chrome.
I've downloaded Glimmer Blocker but it doesn't stop pop-unders at all. Is there a hack to get it to? What is everyone else doing? I can't imagine people are just putting up with the bombardment of ads! Please, any suggestions would be greatly appreciated!

Simple Living wrote:
Ever since AdBlock stopped working in Safari, I've searched til no end for another program, or extension, that will get rid of all pop ups, pop unders, and YouTube ads and banners for Safari. Nothing.
This astounds me because I've never known Mac gurus to not be on top of somthing like this. Are there any alternatives? I only use Safari and not Firefox or Chrome.
I've downloaded Glimmer Blocker but it doesn't stop pop-unders at all. Is there a hack to get it to? What is everyone else doing? I can't imagine people are just putting up with the bombardment of ads! Please, any suggestions would be greatly appreciated!
Greetings!
Just to double check but did you made sure to download the latest version of the extension and ensure that it was enabled inside the Safari setting's menu?
Let us know!

How to get rid off custom installed theme completely and revert back to mavericks theme(system default)

Similar Messages

Maybe you are looking for