How to get rid ofonstant clicking sound on my pavilion dv7 ?

I get rid of the constant clicking sound on my Pavilion dv7 ?

Can you explain more on the "clicking" noise you are hearing? If you mute the computer do you still hear it? It is from the speakers or from the inside of the laptop?
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

How to get rid of "click to activate and use this control"

Hi,
Any idea how to get rid of "click to activate and use this control".
I don't want user to click to start working with the form.
We are using IE6, forms9i and 10g application server.
Thanks in advance.
Kumar

I got the solution...
Metalink - Note:357545.1
Kumar

How to get rid of certain sounds?

I'm very new to soundtrack pro so maybe it's a silly question to ask but if I have a very annoying peeping sound in the background of my footage, is there a simple way to get rid of it? It's a part of my film where two characters have a conversation and there is a construction site close by where the sound ensues from. Any help will be appreciated.

Although I don't do much work at all in Soundtrack Pro, I have used it's spectrum analyzer to remove the sound of a bus with really squeaky brakes on a recent project. The tool you're looking for is the Frequency Selection Tool.
Specific instructions can be found in the Soundtrack Pro Users Manual, starting on page 214.

How to get rid of startup sound on E63

I switch my E63 Off at night (Personal reasons) when I switch it On next morning, after entering the Pin. There's the handshake graphic and a bit of music.
I can put up with the **bleep** handshake graphic, but not the tinny tones, PLEASE... Is there a config somewhere to get rid of that startup noise?
Thanks
Arturox
Solved!
Go to Solution.

For help on disabling warning tones, check out the user guide on page 112: http://nds1.nokia.com/phones/files/guides/Nokia_E63-1_UG_en.pdf
To check the user guide is often a good start when wondering about any setting or how to do stuff... A quick search using the searchbar on this forum is also something to recommend as many problems has already been solved.
Cheers mate!

How to get rid of overlapping sound in imovie

i have a video from youtube that i just put into imovie and i want to figure out the song that is on the video the only problem i have though is that there is a persone talking over the music so im wondering is there a way i can delete the overlapping sound of him talking or a way for me to just make the background sound louder so it overlaps the guys voice instead of the other way around

No, not in iMovie. You could mute the entire sound track and add your own music if you want.

How to get rid of the craking sound comming from my speakers

I have creative 4400 4.1 speakers. Whenever i switch them on (without even booting the OS),Small sounds like the ones comming out of old gramaphone disks which resemble like a cracking sound is comming out of my speakers.
can u tell me how to get rid of that sound , Is it a problem or is it natural in speakers.
-Siva Kumar Reddy.CH.V

If it's happening when they're turned on, but the PC isn't (or there is no source connected to the speakers), then you could try the speakers on another power outlet (in another room perhaps), to check if there's any interference or "dirty power". If there is other electrical equipment around something could be causing interference. It is possible though that there is a hardware fault.
Cat

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound

Sound Virus - Any suggestions on how to get rid of it

The last couple of days I have sound playing in the background that is not from any program I'm running. Sounds like a **** playing but sound only no video. Any suggestions on how to get rid of it?

HI,
If a widget isn't the culprit, open System Preferences/Universal Access and selec the Seeing tab.
Make sure Voice Over is not selected.
Carolyn

Can anyone explain to how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this it is driving me nuts

can anyone explain to me how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this i want to get rid of it it is driving me nuts

What do you have checked in Firefox Preferences>General?
Ciao.

How do i get rid of click to call

Whenever I try to uninstall this crappy program I get an error message
"there is a problem with this windows installer package. a script required for this install to complete could not be run. contact your support personnel or package vendor."
I've had this happen before (it always installs wrong) and somehow I figured out how to get rid of it but for the life of me I can't remember how I did it. Disabling the plug-in on the chrome toolbar does absolutely nothing.
HELP!

rdori wrote:
Re: how do i get rid of click to call
here's how to disable/remove the click and call function;
How to Disable or Remove the Click and Call Function
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

How to get rid of background noise when recording voice on iphone 5 ?

every time i record a voice over i hear wierd background noise can someone tell me how to get rid of it im using my headphones to record btw

Go to System Preferences / Sound and click on the Input button. You should see two items listed in the device menu: the Internal Microphone and Line In. (There may be others if you also are using your USB or Firewire ports for input devices.)
Select Internal Microphone and adjust the Input Volume control to the far left (minimum). This will mute the computer's internal microphone.
Then select the Line-In (or other device) and adjust the input level as needed to make your recording.
Good luck.

How to get rid of filter componet when inserting analysis grid

Hi expert,
I try to inster a analysis grid in say bex analyzer, but when I display this table, there is anoter component named 'Filter' together with analysis grid. why this filter component comes? and how to get rid of it?
Many Thanks,

Hi,
this behavior sounds unusual. Normaly you insert each component individual.
Did you just insert a table or die you "open query"?
If you opened a query, your query is inserted into the standard workbook and if this one includes the filter then you will get it ...
If you switch on the design mode, you will see each component and you can delete the ones you don´t want to use - just make roght mouse click on the component and select "delete".
regards
Cornelia

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

New item icon in iCal suddenly appears and don't how to get rid of it.

I have a little number 1 in my iCal next to my Home calendar on the left side of iCal. It resembles the little number 1 I'd get in the Mail program if I had one new email.
I have no idea where it came from and want it GONE. Can you help?

I just figured out how to get rid of the numbers. Click Notifications on the bottom left part of the Ical screen and some blank invitations will show up. Click one and a box shows up that gives you the option of deleting the Notification/Invitation. I did that for the 4 little boxes and the number is gone.

How to get rid of the reference lines on the front panel

I forgot how I created a couple of horizontal and vertical reference lines on the front panel. It looks like the origin lines on the front panel. When I move my program to another monitor with different resolution, all the layout is messed up because of the reference lines can not change with the resolution. Did anybody meet this before? How to get rid of them?
Attached are the 2 creen shot of front panels.
Thanks in advanced.
Solved!
Go to Solution.
Attachments:
front panel.png ‏63 KB
front panel2.png ‏42 KB

You will have to click on the top menu and choose options see below
when you do this window will pop up and you scroll down until you get to the front panel options. See below
Tim
Johnson Controls
Holland Michigan

How to get rid ofonstant clicking sound on my pavilion dv7 ?

Similar Messages

Maybe you are looking for