How to get RMAN backup logfile.
Hi All,
Can u tell me How to get RMAN backup logfile after completion of the backup.
SQL> desc v$rman_output
Name Null? Type
SID NUMBER
RECID NUMBER
STAMP NUMBER
SESSION_RECID NUMBER
SESSION_STAMP NUMBER
OUTPUT VARCHAR2(130)
RMAN_STATUS_RECID NUMBER
RMAN_STATUS_STAMP NUMBER
SESSION_KEY NUMBERIt works for me
Similar Messages
-
How to get RMAN catalog information from Target database?
Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
ThanksIf you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale -
How to stop RMAN backup in solaris platform.
Dear All;
How to stop RMAN backup in solaris platform.
Ranjan788442 wrote:
How to stop RMAN backup from oracle end.
To stop Rman backup you have to identify rman session as below
select * from v$session
where MODULE like 'rman%'or you can use v$rman_status identify sid and serial then kill this session as
alter system kill session '<sid>,<serial>' immediate; -
How to identify rman backup level?
Hi,
I am using rman catalog for rman backup. how to identify rman backup level from catalog.
Thanks,By doing the obvious and consulting the online documentation at http://tahiti.oracle.com
You will notice the list backup command output has a level column and this is also present in rc_backupset and/or rc_backuppiece.
Sybrand Bakker
Senior Oracle DBA -
How to get Systemstate Backup size using PowerShell command in Windows 2008 R2
Hi,
We using WBSummary command to get completed backup status.
I need to find how much data is backed up using powerShell command .
Is there any way to get the details , i can see the GUI but no in command.
Please advise
Regards Gopi KHi,
You mentioned that you can see the system state backup size in the GUI. Does the backup size mean the amount of date transferred?
It seems that there is no such a PowerShell to get Systemstate Backup size. You may need to you need a PowerShell scripts to do this work.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=ITCG
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to verify RMAN backup ?
How to verify and validate the RMAN backups on daily basis?One more doubt at this point - if we can't locate any RMAN script in crontab(crontab -l) but still backup is occuring regularly, how can we see the script behind this?
Thanks in advance.
Edited by: 916438 on May 27, 2012 8:47 PM916438 wrote:
How to verify and validate the RMAN backups on daily basis?One more doubt at this point - if we can't locate any RMAN script in crontab(crontab -l) but still backup is occuring regularly, how can we see the script behind this?
What you want see? If backup was executed without error or make sure that there is a valid backup on tape or disk.
So, If you want see if backup was executed successfull you must find the logs of backup or query "V$RMAN_OUTPUT" (check it on documentation).
If you want check if Database is Valid on Disk or TAPE as mentioned previously "RESTORE VALIDATE DATABASE" (check it on documentation).
Where we can locate RMAN SCRIPT? It's hard to answer.
It' your env, you should find out. The options are: Crontab / Oracle Enteprise Manager / Third-Party Backup Software / Job Scheduler.
Also you can try : Take a time of backup was executed and check on shell a time of exection of backup " ps -ef |grep rman" you will find from where script was started.
Regards,
Levi Pereira -
How to check RMAN backup report or log
Hi Guys,
I have RMAN schduled to backup my database daily.
Please what are the steps to check the report of the backup to see what was actually backed up and if it backup up ok
ThanksUse "LIST BACKUP" to display information about backup sets, proxy copies, and image copies. With LIST command you can list the following:
- Backups and copies that do not have the status AVAILABLE in the RMAN repository
- Backups and copies of datafiles that are available and can possibly be used in a restore operation
- Specified archived logs, backup sets, backup pieces, control file copies, datafile copies, and proxy copies
- Backups and copies restricted by tag, completion time, recoverability, or device
- Incarnations of a specified database or of all databases known to the repository
- Stored scripts in the recovery catalog
Examples on how to use LIST command are listed below:
RMAN> LIST BACKUP;
RMAN> LIST EXPIRED BACKUP;
RMAN> LIST BACKUP OF DATABASE;
RMAN> LIST BACKUP SUMMARY;
RMAN> LIST BACKUP BY FILE;
RMAN> LIST ARCHIVELOG ALL;
RMAN> LIST COPY OF DATABASE ARCHIVELOG ALL;
RMAN> LIST COPY OF DATAFILE 1, 2, 3;
RMAN> LIST BACKUP OF ARCHIVELOG FROM SEQUENCE 1437;
RMAN> LIST BACKUPSET OF DATAFILE 1;You can use the VALIDATE keyword of the BACKUP command to do the following:
- Check datafiles for physical and logical corruption
- Confirm that all database files exist and are in the correct locations
For example, you can validate that all database files and archived redo logs can be backed up by running a command as follows:
RMAN> BACKUP VALIDATE DATABASE ARCHIVELOG ALL;I suggest you read Oracle® Database Backup and Recovery Manuals:
http://www.oracle.com/pls/db102/portal.portal_db?selected=3 -
How to move rman backups on tap from disk
Hi,
I have rman backup files on the disk, now how we can move these files to tap. is there any rman command or is there any script to move.
Thank you!Do you use FRA (Flash recovery area)?
If you use FRA then configure RMAN to take backup to tape. And backup fra to tape.
RUN
ALLOCATE CHANNEL ch0 TYPE ‘SBT_TAPE’;
BACKUP RECOVERY AREA;
RELEASE CHANNEL ch0;
If you don't use FRA then you can backup your backupsets which are on the disk to tape.
RMAN> BACKUP DEVICE TYPE SBT BACKUPSET ALL;
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/ -
How to get icloud backup on new iphone 5c
I got a new iphone 5c today. I backed up my old iphone 4 on icloud but now I don't know how to get the information to my new phone. I keep reading things about going through the set up process but I guess they did all of that at the store so now I don't know where to restore the icloud backup. Please help.
See if http://support.apple.com/kb/TI74 helps the setup/restore process.
-
How to distribute RMAN backup among tape volumes in OSB
Hi Guys,
I would like to ask some information about OSB. I have finally set up our Oracle Secure Backup 10.3.0.3.0 and initial OSB backup to tape is good using our test environment.
Now, our production servers has the following details:
Serv01
- Oracle Database 11.1.0.7
- Windows Server 2003 R2
- Current RMAN backup to disk full (level 0) is at 2TB.
Serv02
- this is our media server for OSB and we manage from here all other servers that we would like OSB to be implemented.
-Windows Server 2003 R2
- We have IBM tape library here with four drives
- Our tape volumes are 480GB each (compressed) we about 50 of them.
-Each tape volume has barcodes and our library has barcode reader
How can I group certain tapes (as a media family?) and use them for our level 0 backup. As you know, one tape cannot hold our level 0 backup so we need at least 5 tape volumes to hold our level 0 backup. Is there a step by step process of doing this? Or does anyone know how to do this?
Thanks and I would really appreciate your thoughts about this.Yes, media families (like tape pools) are used to group backups on tape. Using a database backup storage selector, you set-up media policy so OSB will automatically select appropriate storage when for the backup per your settings. You may want to refer to this white paper which discusses media management:
http://www.oracle.com/technetwork/database/secure-backup/learnmore/osb-103-twp-166804.pdf
Donna -
How to control RMAN backup of archive logs in FRA
Setup:
11.2.0.2 GI
ASM Diskgroup for Fast Recovery Area
10.2.0.4 Enterprise Database
Without Catalog Database
To get familiar with Flashback Database we set up RMAN Backups
without deleting the archive logs,
as published in Oracle10g / 11g - Getting Started with Recovery Manager (RMAN) (Doc ID 360416.1)
"These deletions are managed by Oracle when space is required."
We observed that RMAN takes backups of all archive logs every time,
here we go with backing up archive logs every 30 minutes.
So the question is:
Is this (backing up all archive logs every time) the expected behavior or
the result of not using a catalog database or
any other mismatch?
thanx for any hint
MichaelHi Michael,
In Note 360416.1 it refers to two archivelog backup commands.
BACKUP ARCHIVELOG ALL;and
BACKUP ARCHIVELOG FROM TIME 'SYSDATE-30' UNTIL TIME 'SYSDATE-7';Your question:
Is this (backing up all archive logs every time) the expected behavior or the result of not using a catalog database or any other mismatch?If you used the first script you will backup alle archivelogs everytime.
If you use the second one it will do a subset (probably not the range you want to backup...)
You could implement another script
BACKUP ARCHIVELOG NOT BACKED UP 2 TIMES;So every archivelog is only backed up twice.
Check
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#i78895
for more information.
Regards,
Tycho -
How to get the backup of photos from i cloud id ?
plz provide me the answers as soon as possible.
BALAJI_PRASANNA wrote:
Hello,
I am very new to Labview. Í have an image of an LED and wanted to find the luminance value. I got the luminance image from the IMAQ ExtractSingleColorPlane but the value is not displaying. I just wanted to know how to get the value of luminance from the IMAQ ExtractSingleColorPlane. I have attached what i have done below.
Thanks in advance.
Before learning about LabVIEW, learn about images. An Image (in LabVIEW) is a "representation of an image", that is, the wire itself doesn't really have a "value", but "points to" a collection of data that can be "imaged" (i.e. looked at as through it were a picture), "manipulated" (for example, extracting a color plane, basically getting the "red channel", an image looking as through it were viewed through a red filter), and possibly returning arrays of numbers representing the intensity of the light at a certain position in the picture.
BS -
Hi experts,
I need to schedule automated RMAN backups in 10G(RMAN database) and i need to include the support for Oracle 8i, 9i and 10g database backups.
Any type of suggestions are welcome.
Thanx in Advance,
SenthilHi,
Where do you want to backup to? Do you want to backup to disk or to tape drive? Many of the tape drive softwares does have the capability of scheduling the jobs. If you want to backup to disk, then you can use your OS scheduling features.
Before all of that, you will need to write and test indivudual scripts to backup and restore.
HTH
Regards,
Badri. -
HT1937 how to get a backup password which i have never made
i tried all my password but non of them worked how do i get a password for the back up on itunes
There isn't a way to recover the password.
You can try leaving the password field blank.
You can also try using an Exchange account password, some Exchange configuration profiles will require the iPhone to create encrypted backups.
If you can't remember the password, iTunes won't restore the iPhone from that backup. If you don't remember creating a password and think it was a bug or something, try contacting Apple. -
How to set RMAN Backup destinaion
I am configuring RMAN and do following steps
Install 11gr2 software and create database
Create rman user, tablespace and repository
Register my two DB's on two different servers
Then i run following script, after logging into one of DB as target (rman target sys/pwd@pcba catalog=rman/protector@ameen)
{code}
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 2 TIMES TO DISK;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/app/oracle/fra/rman_backups/SBA_RMAN_BK_%t.%p.BAK'
RUN
backup database plus archivelog with tag 'pcba_level0_backup';
delete noprompt obsolete;
crosscheck copy;
crosscheck backup;
crosscheck archivelog all;
quit;
{code}
I was of the view that, this backup set will be save on my server from where i am executing this script, where as this backup is saved on TARGET DB.
I shall be very thank full if any brother help me in this respect and enable me to get it saved on server where rman repository lies.malhi wrote:
I am configuring RMAN and do following steps
Install 11gr2 software and create database
Create rman user, tablespace and repository
Register my two DB's on two different servers
Then i run following script, after logging into one of DB as target (rman target sys/pwd@pcba catalog=rman/protector@ameen)
{code}
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 2 TIMES TO DISK;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/app/oracle/fra/rman_backups/SBA_RMAN_BK_%t.%p.BAK'
RUN
backup database plus archivelog with tag 'pcba_level0_backup';
delete noprompt obsolete;
crosscheck copy;
crosscheck backup;
crosscheck archivelog all;
quit;
{code}
I was of the view that, this backup set will be save on my server from where i am executing this script, where as this backup is saved on TARGET DB.
I shall be very thank full if any brother help me in this respect and enable me to get it saved on server where rman repository lies.
As a side observation, you need to follow those 'crosscheck' commands with 'delete noprompt expired....' commands
The only thing the 'crosscheck' does is mark the record of the copy|backup|archivelog (in the repository) as 'expired' if the copy|backup|archivelog itself is found to have gone missing. The 'delete ... expired' command then deletes the records that have been marked as 'expired'.
Maybe you are looking for
-
I downloaded a dictionary app a while ago that is no longer in the app store. I also don't have it on my newly reformatted windows machine. What can I do to transfer it to another device?
-
Assigning Sourcing rules to Assignment set using API or Interface table
Hello Gurus, We have a requirement to migrate the data from legacy system to Oracle Apps. We are given with a data file containing sourcing rules and assignment set information which needs to be assigned to assignment sets. Are there any APIs or inte
-
IMAP Implementations - Some work / some fail - Please help!
Hello friends - We have an application using mail to exchange information between a master site and remote locations. Due to firewall /political restrictions at originating location, we have been forced to use email on some non standard ports (> 1500
-
InDesign CS5 closes right after it opens
After many, many months of being a reliable companion, one of our InDesign CS5 installations has suddenly started closing itself immediately after opening. We've deleted preferences, uninstalled and reinstalled the software, deleted all but the syste
-
Javascript in Safari - Windows n iMac
How different is Javascript behaviour in Safari - Windows and Safari - iMac??