How to get RxBoot mode on 2610XM?

I have 2610XM. I have configured register value to 0x101 for bext reload into RxBoot mode(Mini IOS), but it did'nt work on 2610XM, it work successfully on Cisco 2522, Why this, Is there any other register value for 2610XM to boot into RxBoot mode.
Please Help?

Hi,
RxBoot mode is only supported on some routers, and 2600 routers don't contain a boot image by default, you can find further information about this following this link:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_configuration_guide_chapter09186a008007e5fd.html
Somewhere in that guide you can read:
"The Cisco 2600 series router does not have a dedicated boothelper image ([rx]boot) as used by some other Cisco routers. With the Cisco 2600 series router, the first image in flash memory is invoked as the default boothelper image anytime the ROM monitor does not recognize the device ID in the boot command"
So this means your router will boot the IOS image on flash even if your config register is 0x2101
Regards.

Similar Messages

  • How to get PROCESS MODE in CRM 2007 WebClient

    Hi all,
    Currently, we're implementing CRM2007 WebClient -- Service Transaction.
    In the past(CRM4.0 Version), we used the function 'CRM_INTLAY_GET_PROCESS_MODE' in the BADI of SAVE Service Order to identify it's a new create order or changed order.
      CALL FUNCTION 'CRM_INTLAY_GET_PROCESS_MODE'
        IMPORTING
          ev_process_mode = l_dialog_mode. " A created, B changed
    Now, this function does not work in Web Client. So, I turned to another function 'CRM_ORDERADM_H_READ_OW' try to get the flag of process mode.
    CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
      EXPORTING
        iv_orderadm_h_guid               = lv_guid_ref
    IMPORTING
       ES_ORDERADM_H_WRK                = l_CRMT_ORDERADM_H_WRK
       EV_MODE                          = l_dialog_mode
    Yes, function 'CRM_ORDERADM_H_READ_OW' works in WebClient. But when creating new service order, the l_dialog_mode  = 'B' which is same to changing an exsiting order.
    So would anyone kindly help me, How to get the process mode properly in WebClient, especially in Service Order. I need to identify the order is new created or is changed.
    Your comments is really appreciated.
    Best Regards,
    Tony

    Use function module CRM_ORDERADM_H_ON_DATABASE_OW to check, if the order has already been save on the database. If not, you are in create mode.

  • How to get the mode (change/display/create/edit) of a CRM WEBUI

    Hi,
    I have a table(custom) in my CRM WBUI ServiceContratc Page. Now I want to hide this table in create mode.
    Could you please let me know, how can I know in which mode I am on WEB UI(Like Create/Change/Display)
    Thanks,
    Aparna

    Hello,
    use below method to check whether view is editable/display mode ...
    me-->view_group_context->is_view_in_display_mode( me ). here "me" refers to the implementation class of view.
    Regards,
    Sandeep Kumar B

  • How to get clamshell mode with Windows 7 on Macbook Pro?

    Hi,
    I am running Windows 7 on Macbook Pro using bootcamp. In OS-X, I can use this cool clamshell feature wherein after putting the MBP to sleep by closing the lid, as soon as I connect an external keyboard, mouse & monitor, I get the display on the monitor and immediately start using the keyboard & mouse too, converting the laptop instantaneously to a desktop.
    I am trying to do the same thing on Windows 7, close the lid of the laptop to put it to sleep, connect my external monitor, mouse & keyboard, but however the laptop never wakes up (even after moving the mouse & pressing keys in the keyboard). I tried several things in Windows 7. Under Power Options, Disabled "selective Suspend of USB", but that did not help. Next, in the "Device Manager", for the "Root USB Hub" & "Generic USB Hub", I tried to set "Allow this device to wake up the computer", under Properties -> Power Management, but that option is grayed out. I tried to experimented with Sleep types like S1, S2, S3, but except for S3, the other two are shown as "not supported by firmware" (using powercfg option in command line). Countless hours wasted on google search to get this working with no success
    I would greatly appreciate any help on this issue.
    Thanks,
    Sri

    @mkultraviolent,
    Thanks for the quick reply.
    That seems to be a useful workaround, but I do not find the option mentioned in Display/ Nvidia control panel. However, I find an option in the "Power Options" which has a "Do Nothing" option in the combo box to select what "Closing the Lid" does. Is that what u are referring to?
    Also, one problem in this approach is, if we do not sleep when the display is closed, that will keep the internal display (laptop's display) running in clamshell mode even after the lid is closed? (which will heat up the laptop badly).
    The exact option I am looking for is, while the laptop is in sleep & lid closed state, connecting the external keyboard/mouse/monitor and pressing a key in the keyboard or moving the mouse should wake the computer from sleep. If this happens, the internal display won't be running. I am able to achieve this in OS-X.
    In Windows7, I have a workaround by which I can almost achieve this result, wherein, while the laptop is in lid-closed, sleeping state, after connecting the external devices (keyboard/mouse/monitor), I open the laptop's lid for a fraction of second, quickly move my finger over the touchpad & close the lid again. This wakes up the laptop, & while it is waking up, Windows realizes that the lid is closed and that external devices are connected and gets into clamshell mode (I have verified that in this state, the internal display is not running).
    This workaround was fine so far, but I got this hengedocks docking station for my macbook, and I am no longer able to use the workaround, because, after plugging my macbook into the docking station, I cannot open the lid. So, the only option is to make Windows7 realize that external devices are connected & wake up on external keyboard stimuli (Hence the question).
    If my question is not clear, this video kind of explains what I want to achieve:
    http://www.youtube.com/watch?v=YOKu9uwdwZI&feature=player_embedded
    Appreciate ur help!

  • Desktop p 6143sc how to get AHCI mode in the BIOS.

    Need AHCI to get better performance on a SSD. I s my computer to old?

    You have the nForce 430 chipset which is a bit of a transitional system. It has SATA ports but the SATA runs in only IDE or RAID mode, not ahci. You can install Windows XP on a machine with that chipset on a SATA hard drive without loading a special SATA driver, for example.  So yes, basically the system is too old to take full advantage of an SSD I am afraid. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • How to get Duotone Mode Ink List Names?

    Hi All,
    I need to get the list of Ink Names in the duotone mode of the document
    Using the Java Script / Windows / Photoshop CS3
    (Example:  PMS 185, PMS 230....)
    Please give suggestion......
    Regards
    William

    How big are your eps files? Where are they located?
    The script should not take long unless your system's disk I/O is slow - such as a slow network server.
    On my system reading a 18mb Photoshop EPS file with a 8bit preview on a local drive takes less than a second to display the inks used.
    At any rate I don't know if there is another way to find the inks using Photoshop. That info does not seem to be part of the Document's descriptor. If the duotones where created in Photoshop the inks are also in the Photoshop resource section of the file. It might be possible to write a script to parse that section so the script could work with psd as well as eps duotones but I don't think it would be any faster.

  • How to get landscape mode to work?

    My landscape mode won't work.  It was working fine before, and all of a sudden I can't get it to work now. My phone is only a week old!

    Reset it, hold down the home and sleep buttons, ignore the red Off slider, wait for the Apple logo and let go of the buttons. Before you do this, is the lock screen icon showing on the top right of the iPhone?

  • How to get compatibility mode or notify ff browser of HTML4

    I manage an old but large and constantly changing commercial website. The site was originally done in HTML2 and has long been at HTML4, with no plans yet to move to HTML5, which would break huge amounts of code using <font> tags, etc.
    I use <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd"> at the top of the files, and it works fine with the latest Explorer in compatibility mode, but less well with other browsers, such as FF, where font sizes and colors, etc. are glitching.
    Is there a way to force FF into the equivalent of IE's compatibility mode? Or to tell FF in the header to function as an HTML4 browser?

    What does the validator say about your site's markup and CSS?
    * http://validator.w3.org
    * http://jigsaw.w3.org/css-validator/
    You can trigger Quirks Mode rendering by omitting the DOCTYPE.
    * https://developer.mozilla.org/docs/Quirks_Mode_and_Standards_Mode
    You really shouldn't have any issues "upgrading" to HTML5 if you don't use antiquated presentation tags like <nowikI><font></nowikI> and <nowikI><center></nowiki>.
    * [https://rawgit.com/whatwg/html-differences/master/Overview.html#obsolete-elements Differences from HTML4 - obsolete elements and attributes]
    * https://developer.mozilla.org/docs/Web/CSS

  • DisplayTag - got the table but the view is simple! how to get  ITS mode?

    Hi guys,
    I have (semi) successfully implemented a nice table using the DisplayTag
    (From: http://displaytag.homeip.net/displaytag-examples-1.1/example-styles.jsp?class=its)
    The thing is that I can see the table but it's in a simple mode! Meaning there's no color, nor borders, no look!
    Wonder if anyone knows what I am missing.
    Thanks
    My code:
    <%@ taglib uri="http://displaytag.sf.net" prefix="display" %>
    <%@ include file="/taglibs.jsp" %>
         <fmt:setBundle basename="ApplicationResources" />
         <table align="center" width = "80%">
              <tr><td>
                        <html:errors property="join"/>
                        <h1>hello jsp worold </h1>
                             <fmt:message key="loggedin.msg">
                             <fmt:param value='${requestScope.userName}' />
                             </fmt:message>
                </td></tr>                                                                   
         </table>
    <display:table name="sessionScope.all_users" class="its">
      <display:column property="userID" title="ID"   paramId="userID" />
      <display:column property="email"   paramId="action" paramName="testparam" paramScope="request" />
      <display:column property="password"   paramId="id" paramProperty="userID" />
    </display:table>

    See Empty/corrupt library after upgrade/crash.
    tt2

  • How to get a mod. removed question out of my "Unanswered Questions screen"

    Hello All,
    I don't know where to ask this. So, I'll try here.
    I have a question still listed in my "My Questions" screen.
    It was removed by the moderators some time back, but remains in my "My Questions" screen.
    It was removed pretty quickly by the moderators, so there was no time to mark it as answered.
    So, now it appears as though I have a permanently unanswered question. So, my log-in will always show 1 unanswered question.
    Right now, I see on the left-hand side, a message that says:
    "You have 1 unresolved question(s)."
    So, I am wanting to find out if there is any way for me to have this question removed from my account. This way I won't have any unanswered questions listed that are not actually active.
    If you are a moderator with access to this, I'll grant you permission right here to remove this from my "My Questions" page.
    The question in question is:
    Mac Mini 1.5 CoreSolo really a CoreDuo???? - No Intel 1.5 CoreSolo Made
    http://discussions.apple.com/thread.jspa?threadID=392125&tstart=0
    Under the link, it says: "Administration » * Posts Removed by Hosts"
    If there is a way that I can remove it from my "My Questions" page, I'd appreciate hearing about it.
    Otherwise, could a Administrator or Moderator help me to do this.
    Now, understand that if contacted for log-in information, I'm going to need some proof of the person being a moderator. I'm not going to give my account info to just anymore
    Thank you in advance for any help you can offer.
    I'll look forward to hearing from you

    Hello All,
    I just came back in, and noticed that they have removed the question from my "My Questions" screen.
    So, looks like it is all fixed now
    Thank you Moderators / Administrators.
    It is much appreciated

  • When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine.  Any ideas on how to get 5.0 working?

    When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly.  Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal.  In mixed mode it works fine both placed.  Any ideas on how to get 5.0 working?  I thought 5.0Ghz was supposed to have a wider range.  Do I need to change a setting on the Macbook Pro?
    Thanks, W

    I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
    The upside is that the 5 GHz signal will allow faster speeds.
    The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
    In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
    If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

  • Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
    iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How to get a single pulse Using Burst MOde?

    Harlow Peeps! Just want to know how to get a SINGLE pulse generated by the AGILENT 33220A function generator? the results i get it's in the burst MODE and everything is running smoothly and fine! it's just that i want to get a single pulse froM it only and not repeated triggeriong of the pulse...
    thanks! ^^
    cheers!

    hi,
    find attached an example, how to set hp33250a ( ag33xxx )  into burst mode.
    hope this helps........... - play with it - and change it to your needs.
    regards
    Werner
    Attachments:
    hp33250a _burst.zip ‏165 KB

  • HP Phoenix 8-core - how do I get XP Mode to work in Windows 7 64-bit?

    My Computer:  HP Phoenix 8-core, 12 GB Ram, over 1,000GB hard drive space, Win 7 SP1 with current updates.  Downloaded and installed the following:  Windows XP Mode with Windows Virtual PC, the hotfix MS provided for AMD multicore, and the MS Hardware-Assisted Virtualization Detection Tool which informed me that my computer does have hardware-assisted virtualization.  I have done EVERYTHING Microsoft has advised.
    How do I get XP Mode to work?

    Frank, thanks for the help.  That Microsoft article is the one I read yesterday morning.  I again just now went into the BIOS as follows:  Security, System Security-Data Execution Prevention AND Virtualization Technology were both enabled.  So I saved changes and exited.  My computer is running Windows 7 Professional 64-bit.
    This is my system information: 
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name    HPPHOENIX
    System Manufacturer    Hewlett-Packard
    System Model    h9-1100z
    System Type    x64-based PC
    Processor    AMD FX(tm)-8150 Eight-Core Processor, 3600 Mhz, 4 Core(s), 8 Logical Processor(s)
    BIOS Version/Date    AMI Ang_716, 4/5/2012
    SMBIOS Version    2.7
    Windows Directory    C:\Windows
    System Directory    C:\Windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United States
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    HPPHOENIX\Debbie
    Time Zone    Eastern Daylight Time
    Installed Physical Memory (RAM)    12.0 GB
    Total Physical Memory    11.8 GB
    Available Physical Memory    10.2 GB
    Total Virtual Memory    23.6 GB
    Available Virtual Memory    21.7 GB
    Page File Space    11.8 GB
    Page File    C:\pagefile.sys
    I downloaded and installed the Windows XP Mode.  The
    I downloaded and installed the Windows Virtual PC. (not the 2007 version-tried that the first time and seen it did not work).
    I applied the "fix" for AMD motherboards.
    I just tried to install XP Mode again--I got almost to the end, the I got the following error message in a rectangle box:
    "Windows XP Mode-Windows Virtual PC
    Could not complete Setup.  Please try again."
    The has happened over 7 times.  Yesterday evening before I posted on this forum, I uninstalled, deleted everything, restarting the computer after doing each step, went to website yet again, redownloaded everything again, and tried to install once again.  Still the same message.  Any help or advice is certainly needed and appreciated.  Debbie

  • I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim, I would like to know how to get my iphone on if it goes into a no service mode and shows as invalid sim

    actually I found the solution :
    http://www.igeneration.fr/itunes/astuce-votre-historique-d-achats-itunes-12056
    it's in french, but the images and google translate will be enough
    hope that helps for the others having the same kinda problem

Maybe you are looking for