How to get samsung display

i first had samsung display,ants got into the display.Got the screen replaced but they gave me lg. So talked to customer care got it replaced again but they gave me new lg screen. Both the lg panels have yellow tint and very low brightness. How do i get a samsung panel. Macbook pro late 2013.

As the TV has HDMI and VGA your choices are to either:
Buy the MiniDVI to VGA adaptor from Apple (plus a VGA cable) or,
Buy a DVI to HDMI connector (link).
Although HDMI can handle sound as neither DVI, MiniDVI nor VGA do you'll need to connect the sound separately. Simply connect the sound out on the iMac to the input on the TV.
mrtotes

Similar Messages

How to get and display current year

hi,
how to get and display current year
and need it to convert numeric format if it is orginally
in character format.

Hi,
chk this FM.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
rgds
anver
if hlped pls mark points

How to get ALV Display with First column alone in sort

How to get ALV Display with First column alone in sort

HI,
You can build Internal Table and send this to the parameter "IT_SORT".
eg:
"the sorting Internal Table structure is as whown below.
DATA: t_sort_info type slis_t_sortinfo_alv.
"Build the Sort Internal Table
t_sort_info-fieldname = 'CARRID'.
t_sort_info-subtot = 'X'.
append t_sort_info.
t_sort_info-fieldname = 'FLDATE'.
t_sort_info-subtot = 'X'.
append t_sort_info.
Then pass this "IT_SORT_INFO" table to the Function module "Reuse_alv_*". (Note send the body of the Internal table only like "<b>IT_SORT = IT_SORT_INFO[]</b>".
Here i am making ALV output sorted on CARRID & FLDATE.
You can specify only the First Column name for sorting.
Regards,
Manju
Message was edited by:
MANJUNATHA KS

How to get the display name of the dropdownlist?

How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.

I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
          HashMap bleh = new HashMap();
          bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
          Iterator it = bleh.keySet().iterator();
          while (it.hasNext()) {
               Object key = it.next();
               SelectItem selectItem = new SelectItem(key, bleh.get(key));
          //And then later, when you want to retrieve the label
          bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing

How to get th displaye record count through SQL*Plus without result

set lines 155
set pages 100
set autoprint on
variable cv refcursor
set serveroutput on size 1000000
set timing on
set feedback on
set echo on
exec proc_name (input1, input2, :cv);how to get the record count without resultset display in the sql*plus promt ...?
plz help me....

This is my earilier code
set lines 155
set pages 100
set autoprint on
variable cv refcursor
set serveroutput on size 1000000
set timing on
set feedback on
set echo on
exec proc_name (input1, input2, :cv);
Then i have tried to execute like this
declare
disp SYS_REFCURSOR;
cv SYS_REFCURSOR;
cnt number :=0;
begin
proc_name (input1, input2, :cv);
FOR disp in cv --here cv is the set of record set
LOOP
--FETCH cv INTO disp;
EXIT WHEN cv%NOTFOUND;
cnt := cnt + 1;
END LOOP;
dbms_output.put_line(cnt);
dbms_output.put_line(cv%rowcount);
CLOSE cv;
end;
getting error...
LOOP
ERROR at line 8:
ORA-06550: line 8, column 2:
PLS-00103: Encountered the symbol "LOOP" when expecting one of the following:
. ( % ; for
The symbol "; was inserted before "LOOP" to continue.
ORA-06550: line 13, column 2:
PLS-00103: Encountered the symbol "DBMS_OUTPUT"
ORA-06550: line 13, column 27:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
. ( , * % & - + / at mod rem <an identifier>
<a double-quoted delimited-identifier> <an exponent (**)> as
from into || bulk
I have set of executable procedure script for exec procedure1(input1, input2 :cv); , exec procedure1(input1, input2 :cv);,.... like that. But i want only the record count, while we execute all these scripts in the sql promt...How to do that one.. ?

How to get current displayed position of an item in listcontrol ?

Hi,
can anyone please help me to get current displayed position of an item in a listbox control in vc++ mfc. I am using CListCtrl class to manipulate.
Thanks,
saffiuddin

On 4/11/2015 3:45 AM, "David Lowndes [MVP]" wrote:
can anyone please help me to get current displayed position of an item in a listbox control in vc++ mfc. I am using CListCtrl class to manipulate.
Have you tried GetItemPosition?
... or GetItemRect (a bit more information).
Igor Tandetnik

How to get the display back??

Hi there!
This is the 3rd time now, when I press the start up button I dont get the display, what can I do Please advice.

ApplaeADay wrote:
As I mentioned before It is more easier for me to send this devise to any of the US address as I'm working in the US Base in Djibouti - (Camp Lemonnier) as I cannot find any apple store in this country. so please provide an address.
The 1 year warrenty expires by the 20th January 2014.
You will have to contact Apple and get specific instructions from them. I believe that they will send you a shipping container for the return of your MBP. Use the phone number at the bottom of this page.
Ciao.

How to get the display value of selected item in list box?

I have a page with an HtmlSelectOneListbox that is filled with an ArrayList of SelectItem objects.
The SelectItem objects contain a Key and Value. The Value is displayed in the ListBox.
The value parameter of the listbox is bound to a bean property which is called selectedListItem.
The bean property selectedListItem contains the Key of the SelectItem that is selected.
How do I obtain the Value of the selectedListItem?
I need to be able to get the Value field that is displayed, not just the Key to the item that is displayed.
Edited by: burferd on Nov 3, 2007 10:03 PM

How are you filling in the value of the menu? Obtain it back by the same way. Or pass it along the key in a object.
This article may give useful insights: http://balusc.blogspot.com/2007/09/objects-in-hselectonemenu.html

How to get the DISPLAY name for a page in 309

How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
John

Did you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected]

How to get my display screen to roll

I am not able to get my iphone to display apps in both directions, up and down and sideways. Some do, however some don't like Facebook.

That's up to the app developers. Facebook dropped landscape mode support quite a few versions ago.

How to get and display voltage value in Labview?

First a little background:
I am a college student doing an internship at a university and my project for the summer involves load cells. I am planning to use LabVIEW as both a multimeter and a calculator that would convert the voltage given off by the load cell into the force exerted on the load cell.
Now here comes the situation:
I have gotten everything hooked up and the load cell is working fine when using a standard multimeter. The data acquisition card is also working fine (The dac is the Measurement Computing USB-2416) as it was reading the same voltages as the multimeter. So all that was left is to put a numerical indicator and use some block code to send the voltage amounts to the indicator.
But the problem is: I simply do not know how to make the proper coding and the Internet is of no help to me on this subject.
My first thought is to do something using AIn() like the first attached picture show, but that resulted in an error stating:
"This function can not be used with this board."
Which is odd, for I am sure this is the right function to get analog readings from the dac.
Then I do something like the second picture, which does not produce an error, but it does produce a value of 255, which is obviously not correct.
At that point, I went on the Internet to get some answers, only to return with no answers at all.
And now, I turn to you guys to help me, for I have a single big question:
Which blocks/code should I use to obtain a voltage from a dac like the Measurement Computing USB 2416 I am using?
Summary of details:
The DAC I am using is the Measurement Computing USB-2416
The DAC is loaded with the latest drivers and Instacal was used as well
The LabVIEW I am using is LabVIEW 2012 version 12, 32 bit.
I got ULx and Universal Library for LabVIEW installed.
The operating system is Windows 7 working on a desktop that is a few years obsolete.
With that being said, can you guys help me out, please?
Attachments:
Lab View Help 1.png ‏4 KB
Lab View Help 2.png ‏4 KB

If you installed the entire Measurement Computing MCC-DAQ CD, you will have installed the ULx for NI LabVIEW. It comes with a bunch of examples. It makes sense to open those examples, and use them as the starting point.
Take a look at the Quick Start for the ULx for LabVIEW - http://www.mccdaq.com/pdfs/manuals/QS%20ULx%20for%20NI%20LabVIEW.pdf
Also, the more comprehensive help: http://www.mccdaq.com/pdfs/manuals/lvulx.zip
As you can see, there are quite a few examples.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

How to get and display image file through servlet

If I've got a jpg file on the server..
How can I use servlet to return that image via the following calling method
/displayfile?filename=image.jpg
the image.jpg in the server will return
I know that I need to set the content type to image/jpeg
after that, how can I return the image file to browser?

- Get the "file" Parameter from the URL QueryString
- check if the File specified exists on your filesystem
- read in the jpg from the file (best would be binary)
- set the right Mime Type (as you already wrote)
- write the filecontent to the ServletOutput as you would do with any other content
- that's it.

How to get lov display value dynamically for an item according to date pick

Hi friends,
I have a date picker item called on_date, and also one lov item course_name
If i select one date from the date picker item means, automatically the course name corresponding to the date has to populate in the course_name item lov.
suppose if i select the date (21-06-2011) from the date picker item means and if there are two courses available for the date in the table
that is *) APEX *)OAF means, then the course_name item lov should show APEX and OAF in the select list.
How to acheive it.
I tried it in the way by creating a dynamic action for the date item
True Action: set value
Sql Expression:
select course_name from xx_trg_course_detail where :P2_ON_DATE between effective_start_date and effective_end_datepage item to submit: P2_ON_DATE
Affected element: P2_COURSE_NAME
it is working if i kept the course_name item as a text field instead of LOV item.
But i need to show the corresponding courses in the lov for the course_name item soon after selecting the particular date from the date picker.
This is the LOV definition that i gave for the course_name item
select course_name r, course_name d from xx_trg_course_detail where :P2_ON_DATE between effective_start_date and effective_end_datewhat is the problem over here.
Thanks
Regards,
Mini
Edited by: Mini on Jun 22, 2011 2:45 AM

Hi friends,
One of my batch mate corrected this problem, by setting
cascading LOV parent item: P2_ON_DATE
page items to submit : P2_ON_DATE
By specifying the date picker item name in the above fields for the item COURSE_NAME.
Now if i select the date from the picker means, the lov item course_name is getting changed as it is showing only the courses of the respective dates.
Thanks
Regards,
Mini

How to get Samsung F34BN movies into iMovie

I just got a Samsung F34BN for Christmas and I can't see from the instructions how to import its movies into iMovie (either 6, 8, or 9). Help OB1, your my only hope

I have a samsung hmx-h100...try this...if the camcorder came with windows software, turn it off in the camera's menu setting...if it has a memory card (like mine), once you've taken your video, connect the usb cable to your mac...the camera should mount on your desktop...double click the samsung icon, navigate to the video folder, and you should see your video clips...drag them onto the desktop...then open up your version of imovie, click import, and select the clips on your desktop...I had various degree of success doing that with imovie 6...imovie 8 handled it well...the other thing you can do if you want to use imovie 6 is use MPEG Streamclip, drag your clips into it, then export to quicktime...you should then be able to import your quicktime movie into imovie 6 and edit...

How to get iVIEW displayed when logged in a non administrator

Hello friends
I have configured EP in such a way when I login as a user with admin rights, it displays the right iview I want. But it also displays the CONTENT ADMIN, USER ADMIN, and SYSTEM ADMIN tabs also.
I want to create a user which displays the ivew I want but not these admin related tabs.
If I remove the role SAP_J2EE_ADMIN then the iview doesn't show up at all. I even tried just putting SAP_J2EE_GUEST role but didn't work.
Any suggestions?
Thanks in advance
Ram

Thanks a lot Santhosh for the response.
I have created a group that has the right roles defined.
I have created 2 users. One with admin rights and another without admin roles(SAP_J2EE_ADMIN)
When I login as the user with Admin rights I see the iview that i need.
However when i login as the other user with out Admin rights I dont see this iview.
As I said in the beginning both belong to the same group that has right roles defined. Only difference between the two user accounts are that one has SAP_J2EE_ADMIN role added and the other one don't.
So I would like to know why this other user, when logged in doesn't see the iview.
Hope I have explained it clearly. If you have any further questions please let me know.
THanks
Ram

How to get samsung display

Similar Messages

Maybe you are looking for