How to get SegmentNumbers and parentSegmentNumbers Dynamically

Hi
in my Idoc to file ..
i want to get Segment Numbers and parent Segment numbers
SourceMT                TargetMT
SegmentA                 SegmentA
SegmentB       SegmentB
SegmentC       SegmentC
    SegmentD         SegmentD
    SegmentE         SegmentE
SegmentF       SegmentF
SegmentA is parent for SegmentB,C,F
SegmentC is parent for SegmentD,E
Segment numbering start from 1,2,3,..
SegmentA number is 1,SegmentB number is 2,..,SegmentF number is 6..we have total 6 segments
in every structure lookis like
SegmentXXX
segmnentnum
parentsegnum
Total numeber of segments varies on Idocs..one IDoc may contain 6 Segments ,another may contain 24 segments..
i want to get SegmentNumber and ParentSegment number for each Idoc..
eg:for SegmentE -->Segment Numeber is 5 (count starts from top)
                   parent Segmentnumber os 3 ( SegmentC is parent for SegmentE and 3 is the SegmentNumber for SegmentC)
please guide me how we can achieve this Segment number and parent SegmentNumbers dynamically in XI.
I tried in message mappig without success.,
please help
regards
ram

Ram,
Create a File port in WE21 and assign this port to your IDoc in WE20. When the Idoc is triggered the corresponding IDoc is converted into IDoc Flat file with fixed lengths. Then you can read this fixed length Idoc and can convert into Idoc XML. or Check the section 3.2 which converts your flat file idoc into Idoc XML. This should solve your issue.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
---Satish

Similar Messages

How to get the byte[] size dynamically from the StreamMessage object

Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}

When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom

How to get gui_download and gui_upload with popup filename?

how to get gui_download and gui_upload with popup filename?

Here is a short example.
report zrich_0003 .
data: ifiletab type filetable.
data: xfiletab like line of ifiletab.
data: xstring type string.
data: rc type i.
data: itab type table of string.
data: xtab type string.
start-of-selection.
call method cl_gui_frontend_services=>file_open_dialog
    changing
      file_table              = ifiletab
      rc                      = rc.
read table ifiletab into xfiletab index 1.
xstring = xfiletab-filename.
check not xstring is initial.
call method cl_gui_frontend_services=>gui_upload
    exporting
      filename                = xstring
changing
    data_tab                = itab.
loop at itab into xtab.
    write:/ xtab.
endloop.
Regards,
Rich Heilman

How to get nodes and its attributes of an XML file usiong DOM parsing?

how to get nodes and its attributes of an XML file usiong DOM parsing?
i am new to XML parsing.......
Thanking you........

import org.w3c.dom.Document;
import org.w3c.dom.*;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.DocumentBuilder;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;      ...
//Setup the document
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
     DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
     Document doc = docBuilder.parse (new File("MY_XML_FILE.xml"));
//get elemets by name
     String elementValue = doc.getElementsByTagName("MY_ELEMENT").item(0).getTextContent();
//This method can return multiple nodes, in this instance I get item(0) , first nodeRead the api for other methods of getting data.

How to get vendor and company code based on logistic invoice document

how to get vendor and company code based on logistic invoice document in abap/4?

Hello Kumar
When you call BAPI_INCOMINGINVOICE_GETDETAIL using
INVOICENUMBER = <number of invoice>
FISCALYEAR = <fiscal year>
the returned HEADERDATA contains what you are looking for:
HEADERDATA-COMP_CODE
HEADERDATA-DIFF_INF
Regards
Uwe

How to get tools and other bars back in view after deleting show-bar?

How to get tools and other bars back in view after deleting show-bar?

Hello Jouko.
You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

How to get max and min salary in a table

How to get max and min salary in a table

SQL> select max(sal),min(sal) from emp;
MAX(SAL) MIN(SAL)
5512 800
SQL>

How to get instrument and plug in files to logic8?

How to get instrument and plug in files to logic8?
I lost mine in a hard drive crash.
I cant use my DVD jam pack
This is my spec
Modellnamn:          iMac
Modellidentifierare:          iMac8,1
Processornamn:          Intel Core 2 Duo
Processorhastighet:          2,4 GHz
Antal processorer:          1
Totalt antal kärnor:          2
L2-cache:          6 MB
Minne:          3 GB
Busshastighet:          1,07 GHz
Boot ROM-version:          IM81.00C1.B00
SMC-version (system):          1.29f1
iMac, OS X Mountain Lion (10.8.2)

I think you want to get the latitude and longitude information of client accessing the web application. In the web application you cannot directly get the client location information as the nature of the web application is different from windows applications.
I advise you to develop a Silverlight component and in that Silverlight component use geolocation classes to get client location. Please refer this article for getting data in Silverlight http://www.c-sharpcorner.com/UploadFile/82b980/getting-geo-location-of-user-in-silverlight/
And once you get the location information you can send that data back to ASP.net webpage or call any javascript method as shown here http://ovaismehboob.wordpress.com/2013/06/22/bridging-data-between-asp-net-and-silverlight/
Hope this helps!
Ovais Mehboob Ahmed Khan http://ovaismehboob.wordpress.com

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Anyone.know.how.to.get.spacebar.and.delete.button.to.work??

anyone.know.how.to.get.spacebar.and.delete.button.to.work??

I think you are asking this in the wrong forum. This is for TBD issues.

On runtime, how to get EventDispatchThread and clear EventQueue?

On runtime, how to get EventDispatchThread and clear EventQueue?
My programer throws following exception on runtime, I want to get EventDispatchThread to stop event dispatch and clear EventQueue on runtime.
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
     at javax.swing.plaf.basic.BasicTableUI$Handler.repaintLeadCell(BasicTableUI.java:721)
     at javax.swing.plaf.basic.BasicTableUI$Handler.focusGained(BasicTableUI.java:735)
     at java.awt.AWTEventMulticaster.focusGained(AWTEventMulticaster.java:162)
     at java.awt.Component.processFocusEvent(Component.java:5354)
     at java.awt.Component.processEvent(Component.java:5221)
     at java.awt.Container.processEvent(Container.java:1961)
     at java.awt.Component.dispatchEventImpl(Component.java:3933)
     at java.awt.Container.dispatchEventImpl(Container.java:2019)
     at java.awt.Component.dispatchEvent(Component.java:3781)
     at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1810)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:827)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:478)
     at java.awt.Component.dispatchEventImpl(Component.java:3819)
     at java.awt.Container.dispatchEventImpl(Container.java:2019)
     at java.awt.Component.dispatchEvent(Component.java:3781)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:234)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

See Recover your iTunes library from your iPod or iOS device.
tt2

How Adobe gets DATE and its format?

Hello,
I am getting current (todays) date by using below JS in some flds, and by using below FormCalc for some flds into my_form,
JS:
var currentTime = new Date()
Form Calc:
$.rawValue = num2date(date(), DateFmt(MM/DD/YYYY))
But, i dont have much idea that how adobe is getting this date? For my company this is the very first form, hence they are asking me how adobe gets date and its format whether,
1) From local IP/Interner provider address's date, format?
2) or user PC/laptop's LOCAL settings date, format? if so, for example, if Germany user (Laptop settings) has a DD.MM.YYYY configured, if this user comes to US on a busines trip and if that user opens the form, then how the date looks like for this user? as per user laptop settings DD.MM.YYYY or local internat provider date format MM//DD//YYYY?
Thank you

Hi,
the date() function returns the number of days since 01.01.1900 for the local date of the current system (related to the system clock of the OS).
If you travel from Germany to the US but don't update your date/time settings, then it returns the same date in the US as in Germany.
You can check the behavior by changing your local date/time setting or the timezones.

How to get userId and ResponsibilityId of EBS Application

Hi all,
We are using oracle.apps.fnd package to get the userId and ResponsibilityId of EBS Application. By using this api we are getting -1 for both userId and resposibilityId, but want the corrrect values for these two Ids.
Can anyone please tell us how to get userId and ResponsibilityId of EBS Application using oracle.apps.fnd package?
Thanks,
Eswari

Hi Kumar,
Thanks for your answer. I tried using pageContext, but it didn't work.
I forgot to mention the version of EBS Application. We are using 12i.
To use FND_GLOBAL package first we should initialise by passing userId and respId which we want. Can we get these details from this api oracle.apps.fnd of 12i Instance.
Thanks,
Eswari
Edited by: user593578 on Jul 31, 2009 4:35 PM
Edited by: user593578 on Jul 31, 2009 5:18 PM

How to get Capacity And Custom Attribute Data Through Powershell

how to get Capacity And Custom Attribute Data Through Powershell

Hi Nitesh,
Great command from Martin.
Also find a article to configure the Quota:
http://technet.microsoft.com/en-us/library/aa998353(v=exchg.141).aspx
Thanks
Mavis Huang
TechNet Community Support

Stuck in restart - how to get out and reboot

I have a MacBook that is stuck in restart mode. Any advice how to get out and restart? Thanks

Welcome to Apple Support Communities. We're all users here.
Try powering off and restarting in 'Safe Mode': The instant you hear the startup tone, hold down the shift key and keep it held down as explained in this Apple support note:
http://support.apple.com/kb/ht1455
A Safe Mode restart does take much longer than a normal start, because the computer checks the hard drive and ignores cached kernel extensions that normally speed boot-up.
http://support.apple.com/kb/TS1884
Note that not all devices and services, notably WiFi, may be available after a Safe Mode start.
This is not necessarily an indication of a hardware error.
After your computer starts in Safe Mode, you should shut down, and attempt to restart normally.

How to get SegmentNumbers and parentSegmentNumbers Dynamically

Similar Messages

Maybe you are looking for