How to get select option on OVS help.

HI all,
can we have select-option on OVS help screen? if yes how to declare the select option. do we need wds_select_options component? can any explane step by step how to achive this?
OVS is working fine without range. I went through so mant post but not able to catch the starting point of this.
Regards,
Deepthi

Hi,
check the below thread.
[https://forumsa.sdn.sap.com/thread.jspa?messageID=8331126#8331126]
Regards,
Priya

Similar Messages

How to create SELECT-OPTION in search help (search) field

Hi All,
We have created a search help using Help view as selection method.
But, we want to have a SELECT-OPTION for one of the search parameters. How do we implement the same ?
Regards,
Ashish

hi
try this
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_LOW'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_LOW'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
    TABNAME                   = 'YRJEMPDETAIL'
    FIELDNAME                 = 'L_NAME_HIGH'
*   SEARCHHELP                = ' '
*   SHLPPARAM                 = ' '
   DYNPPROG                  = 'SAPMZRJ_HELP'
   DYNPNR                    = '9000'
   DYNPROFIELD               = 'LAST_NAME_HIGH'
*   STEPL                     = 0
*   VALUE                     = ' '
*   MULTIPLE_CHOICE           = ' '
*   DISPLAY                   = ' '
*   SUPPRESS_RECORDLIST       = ' '
*   CALLBACK_PROGRAM          = ' '
*   CALLBACK_FORM             = ' '
*   SELECTION_SCREEN          = ' '
* IMPORTING
*   USER_RESET                =
* TABLES
*   RETURN_TAB                =
* EXCEPTIONS
*   FIELD_NOT_FOUND           = 1
*   NO_HELP_FOR_FIELD         = 2
*   INCONSISTENT_HELP         = 3
*   NO_VALUES_FOUND           = 4
*   OTHERS                    = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
hope this helps
Regards
Ritesh J

How to get select-options type fields in module programming

i need to get ranges type of fields ( like we use select-options in reports) in module prgrming..im only gettin single entry field (like we use in paramenters)...how to get it like this
field1 ___ to ___ ->
field2 ___ to ___ ->
Thanx,
Naveen Vishal

Hi,
report zrich_0006 .
tables: mara.
Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
p_rad2 radiobutton group grp1,
p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
s_matkl for mara-matkl,
s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
Create Screen 100 with a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to make Select Options Mandatory?

Hi Guys,
              Can anybnody tell me how to Declare Selection Options for some of them mandatory.
Select-Options : v_PurOrg for EKKO-EKORG default '2000',
                         v_GRDate for Sy-Datum ,
                         v_GRPrd for MSEG-GJAHR.
         In these i have to make v_PurOrg Manadatory.
Thanks,
Gopi.

Hi Gopi,
In order to make select-options mandatory we add OBLIGATORY in the statement like the below.
Selection-Screen.
Select-Options : v_PurOrg for EKKO-EKORG default '2000' OBLIGATORY.
In this case, only the first option will have the default value of 2000.But if you want both the options low and high of select-options, means you have to add the below code in your program in the initialization event.
Initialization.
v_PurOrg-low    =   1000.
v_PurOrg-high    =   2000.
append v_PurOrg.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How will use Select-Options in Read table Concept.

Hi All,
              How will use Select-Options in Read table. For example,
      Select-Options : test for bseg-prctr.
       Select * from bseg into table ITAB.
Read table ITAB with key prctr in test.
Last line is showing error. If any way to read ITAB as conditions given per select options.
Thankx Advance,,,

HI,
you cannot use " IN " with read statement , read statement is used as:
READ TABLE it_collect ASSIGNING <fs_collect>
                  WITH KEY   rbpl = <fs_wkdet>-arbpl
                             ufnr = <fs_wkdet>-aufnr.
anyways you can use loop at statement before read to use " into " statement as:
LOOP AT it_master INTO l_master
                                       WHERE werks       = l_werks
hope it will help you
regards
rahul
Edited by: RAHUL SHARMA on Dec 30, 2008 9:14 AM

How to transfer select options variable

Hello:
I can pass parameter to parameter id such as p_fikrs, but how to transfer select options parameter to parameter id such s_fictr.
SET PARAMETER ID 'FIK' FIELD p_fikrs.
SET PARAMETER ID 'FIS' FIELD s_fictr.
SET PARAMETER ID 'FPS' FIELD s_fipex.
SET PARAMETER ID 'GJR' FIELD p_year.
CALL TRANSACTION 'FMRP_RFFMEP1BX' AND SKIP FIRST SCREEN.
Thank you very much!

Use SUBMIT with the following option
SUBMIT... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Hope dis helps,
Reward if it does

How to get profile options & values at user & responsibility level by SQL?

Experts, How to get profile options and values at user and responsibility level using SQL?

SELECT
po.profile_option_name as name
, po.user_profile_option_name
, decode(to_char(pov.level_id),'10001','SITE','10002','APP','10003','RESP','10005','SERVER','10006','ORG','10004','USER', '???') as "LEVEL"
, decode(to_char(pov.level_id),'10001','','10002', app.application_short_name,'10003', rsp.responsibility_key,'10005', svr.node_name,'10006', org.name,'10004', usr.user_name,'???') as context
, pov.profile_option_value as value
FROM
fnd_profile_options_vl po
, fnd_profile_option_values pov
, fnd_user usr
, fnd_application app
, fnd_responsibility rsp
, fnd_nodes svr
, hr_operating_units org
WHERE 1=1
AND pov.application_id = po.application_id
AND pov.profile_option_id = po.profile_option_id
AND usr.user_id (+) = pov.level_value
AND rsp.application_id (+) = pov.level_value_application_id
AND rsp.responsibility_id (+) = pov.level_value
AND app.application_id (+) = pov.level_value
AND svr.node_id (+) = pov.level_value
and org.organization_id (+) = pov.level_value
ORDER BY 1, pov.level_id, 5
You'll need to apps initialize your SQL session before running this ...
Regards,
Jon

How to get selected value from selectOneRadio ???

Hi...i want to how to get selected value from selectOneRadio and use it in another page and in backing bean.
Note i have about 10 selectOneRadio group in one page i want to know value of each one of them.
Plzzzzzzzz i need help

You have a datatable in which each row is a question, correct?
Also in each row you have 5 possible answers that are in a radio, correct?
So,
You need to put in your datatable model, a question, and a list of answers (5 in yor case) and the selected one.
So you will have a get to the question, an SelectItem[] list to populate the radios and another get/set to the selected question.
ex:
<h:selectOneRadio value="#{notas.selectedString}" id="rb">
<f:selectItem itemValue="#{notas.valuesList}"/>
</h:selectOneRadio>
Search the web for examples like yours.

How to get selected value from OADefaultListBean.

Hi All,
How to get selected value from OADefaultListBean ?
Thanks,

Hi,
To identify the user's selection(s) when the page is submitted, you would add the following logic to your processFormRequest() method:
OADefaultListBean list =
(OADefaultListBean)webBean.findChildRecursive("positionsList");
String name = list.getName();
String[] selectedValues = pageContext.getParameterValues(name);
To retrieve all the values in the list box, call list.getOptionsData().
--Prasanna

How to get selected row index of a Table ?

hi gurus,I'm new to Webdynpro for abap
I'm displaying just Flight details in a Table so
how to get selected row index of a Table and need to be display in Message manager.

Hi,
For getting the row index use the following code.
DATA lo_nd_node TYPE REF TO if_wd_context_node.
DATA lo_el_node TYPE REF TO if_wd_context_element.
DATA index TYPE i.
* navigate from <CONTEXT> to <NODE> via lead selection
lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_node ).
lo_el_node = lo_nd_node->get_lead_selection( ).
index = lo_el_node->get_index( ).
node is the name of the node which is binded to the table.
For printing the message u can use code wizard.
Press ctrl-F7. Now Select generate message.
IN this select the method REPORT_SUCCESS
In the code now u can give index to Message text Exporting parameter. Comment receiving parameter.
Write the whole code in onLeadSelect of the table.
Regards,
Pankaj Aggarwal

How to get selected row keys from RichSelectManyCheckbox

Adf Table has getSelectedRowKeys but SelectManyChekcbox does not has anything similar. Can you tell me how to get selected row keys programmatically for RichSelectManyCheckbox?

Hi User,
selectManyCheckbox component's value property holds the selected items values. Bind this property to some bean variable(of type list) so that you can get the selected values by accessing the bean property.
Sireesha

I went to put music on my itunes from my ipod and it deleted most of my music off of it and i dont know how to get it back. PLEASE HELP ME. :-|

i went to put music on my itunes from my ipod and it deleted most of my music off of it and i dont know how to get it back. PLEASE HELP ME. :-|

- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If necessary, you can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to get select option on OVS help.

Similar Messages

Maybe you are looking for