How to get Sil 3114 to be NON raid on Neo4 platinim

Ive searched all day to try and find this answer with no luck. I even saw a post or 2 on the forum here that were not totally resolved. I want to use the orange usb sil3114 as a normal non raid sata. It shows up now during bootup because i enabled it in the bios, but it wont work as jbod because when I go into the utility that is not an option so the drive I connect to it wont work.

http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=165
Reading below carefully I get the impression, that BIOS will not see the disk.
SiL chapter is no 6 in the manual. Since you have so many disks already I dare not give any advice of my own:
Before installing the SATARAID5 software, Silicon Image Serial ATA host adapter
driver must be installed. Insert MSI driver CD into the computer’s CDROM drive and
select Silicon Image SATA RAID Drivers.
The Java 2 Runtime Environment is required for the SATARAID5 GUI. The Java 2
Runtime Installer and executable package must be downloaded from the Sun
Microsystems website at http://java.sun.com/j2se/downloads.html. The computer
must have an Internet connection set up before installation can proceed.
Save the installer file to a known location, such as the My Documents folder. Using
Windows Explorer or by clicking on the My Computer icon on the desktop, select
the installation file and open it. The installation will begin. The installer program will
download the needed files from the Internet.
Creating JBOD
Since BIOS no longer reports non-RAID drives to the system BIOS, if a non-RAID
boot drive or data drive is desired, a JBOD
can be created so BIOS will report it to the system BIOS.
1. To create a JBOD, Select ”Create RAID set”
2. Select “JBOD” and press Enter.
3. Select JBOD drive from the physical drive list and press Enter.
4. Select JBOD size with and keys.
5. After the JBOD size is set, the message “Are You Sure?” will display before
completing the configuration. Answer “N” to abort the creation of the JBOD, or “Y”
to proceed with the JBOD creation.
Resolving Conflicts
When a RAID set is created, the metadata written to the disk includes drive
connection information including the channel on the host adapter to which it is
connected. If after a disk failure the replacement disk was previously part of a
RAID set or used in another system, it may have conflicting metadata, specifically
in reference to the drive connection information. If so, this will prohibit the RAID set
from being either created or rebuilt. In order for the RAID set to function properly,
this old metadata must be first overwritten with the new metadata. To correct this,
select “Resolve Conflict” and the correct metadata, including the correct drive
connection information; will automatically be written to the replacement disk.
1. Select “Resolve Conflicts” and press Enter.
2. Select the “Conflict” entry in the Logical Drive Status window and press Enter.
3. Note that some conflict resolutions may result in the drive letter assignment
changing; for example the RAID set may have been drive D: but after the conflict
resolution, it may become drive E. Be aware of this when performing a conflict
resolution. To maintain the same drive lettering, the SATA cables connected to the
drives may need to be swapped, or in the case of a SATA-based removable drive
unit, the order of the drives within the chassis made need to be changed.
Press ‘Y’ to accept the change and resolve the conflict.
4. The conflict will be resolved. The RAID Set will appear in the Logical Drive
window.
Reserved Drive and Setting Size for RAID Set, Spare Drive, or
JBOD
Once a physical drive has been used to create a RAID set, spare drive, or JBOD
by BIOS utility, BIOS saves user selected set or drive size in the reserved area of
the physical drive. There is no way to remove the reserved area information even
after the user deletes the set or drive. For this reason, after a set or drive is
deleted, BIOS recognizes the physical drive as a reserved logical drive and it will
not report the drive to the system BIOS.
When user selects to create a RAID set, spare drive, or JBOD, he or she has to
select size for the set or drive. BIOS will set a default size for it and user can use
the and keys to change the size. If the physical drive has never been used to
create a set or drive by the BIOS before, the full size of the physical drive will be
set as default size. Otherwise, BIOS will set default size to the size it saved in the
reserved area of the physical drive before.
If the user wants to increase the default size, BIOS will display a warning
message in the help window and for user’s response
before changing the default size.

Similar Messages

How to get selected row from a non-bind ADF table

Hi,
I have an ADF table that is based on a collectionModel built programmatically. The collectionModel is this:
model = new SortableModel(new ArrayList<ArrayList>());
Hence, it is not a binding table. My question is how to get the selectedRows from a non-bind table.
I am used to building binding ADF table and I know we can get it from voiterator.getCurrentRow, since the selectionListener is set to the binding....collectionModel.makeCurrent
<af:table value="#{bindings.ItasLookupTypesVO1.collectionModel}"
selectedRowKeys="#{bindings.ItasLookupTypesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasLookupTypesVO1.collectionModel.makeCurrent}"
</af:table>
I am thinking maybe I need to write my own selectionListener, but need more advice/ideas of what's the codes in the customer selection Listener to get it from my SortableModel.
Please help.
Thanks
-Mina

I'm not sure if this works in your case, but check out the selection listener I write in this blog http://wp.me/pcBZk-eu
You should use the selection event and check the added set. This should give you access to the selected row.
Timo

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get the refund of the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

Cisco 1702i WAP: how to get an interface in a non-native bridge group/ VLAN to be recognized by the internal DHCP server

Does anyone know how the internal DHCP server in these access points connects to virtual interfaces and bridges in the unit?
Is there some sort of default connection that connects the DHCP server to the native bridge group or VLAN?
In a test case, with an SSID in the native VLAN and bridge group, the 1702i serves an IP address to a wireless client no problem. But with a second SSID in a non native VLAN and bridge group, no IP gets served. My only guess is that since the bvi1 defaults to the native bridge group and VLAN, sub-interfaces also in this group are assumed to be in the same subnet as bvi1, or in this case:
interface bvi1
ip address 192.168.1.205 255.255.255.0
no ip route-cache
exit
It would be the ..1. subnet.
Since the dhcp pool is set as:
ip dhcp pool GeneralWiFi
network 192.168.1.0 255.255.255.0
lease 1
default-router 192.168.1.1
dns-server 8.8.8.8
exit
There may be an assumption that anything bvi1 can talk to is in the ..1. subnet, so the above pool gets activated on a request coming through bvi1.
Is the DHCP server just hanging out waiting for a request from an "area" that is assumed to be on the same subnet as the given pool?
Do I need to somehow show the device what subnet the 2nd SSID/ subinterfaces are in so the internal DHCP server can decide it needs to go to work, or is there some sort of bridging between the DHCP server and the interfaces that needs to be done? I am trying to use the same DHCP pool for the second subnet at this point, since I assume I will need another router to service an additional subnet and DHCP pool.

Keep in mind that DHCP is a broadcast packet to start. So the AP can only listen in the subnet that it has an IP address for.
Now, for any other subnet you can use the AP for DHCP but you have to have an IP helper address on your L3 pointing back to the AP.
That being said, I wouldn't use the DHCP server on the AP as it is limited. You'd be better off using a Microsoft server or some other device that is designed for DHCP.
HTH,
Steve

How to get Fiori fluid design in Non ABAP environment

hi All,
I am very new to fiori, want to use the the responsive lay-outing in business objects product so please help me getting the stating guide for fiori.
In Business objects we have the webapp (tomcat) so how to bootstrap fiori in tomcat??. First of all is my understanding correct about fiori??
Can it be used outside ABAP or SAP context like SAPUI5.
Thanks & regards
Kunal

Hi Kunal,
Fiori uses UI5 libraries (html5) hence it is responsive(adjusts as per the resolution of the screen).
This cannot be used for SAP GUI as we have webdynpro screens and these are non responsive.
Fiori is always placed as a frontend being UI5 application. Business data comes from SAP. If you want to build fiori-like applications. You need an odata service(to be built using SAP Netweaver gateway) and a ui5 application to consume the service. You can either setup eclipse or use WEBIDE.
For more information on FIori : All Things SAP Fiori
For information on UI5 area : SAPUI5 Developer Center | SCN
or What is OpenUI5 / SAPUI5 ?
Regards,
Tejas

Help: How to get rid of the default None from Radio buttons?

Hi, I searched the forum and found a work around for inputSelect. It seemed it does not work for Radio buttons, i.e., inputSelectGroup with multiple=false.
Please anyone help us to get rid of the none choice for gender among female and male. Thank you very much in advance.
ZD

The 'none' choice is automatically displayed for fields that allow nulls.

How to get JMStudio to work with non-multicast

i can use JMStudio to capture from my webcam and stream video using suggested multicast address;
i can use 2nd JMStudio on same or different machine to receive the multicast video transmitted from 1st JMStudio;
i am unable to discover how to use JMStudio with a non multicast IP;
i try to tell it to use the IP of my local machine and pick a port such as 8008;
when the other JMStudio is started for receiving (assuming i started transmitting 1st) i tell it the same IP address and port as the 1st --
and it returns an error;

I imagine it's just an error dealing with port reuse... you're trying to do two different things on the same port, which isn't possible.
Try it on two different machines.

How to get InetAddress.getHostName() to skip non valid ips.

im trying to build a network mapper that will scan all ip addresses up to 192.168.0.256 indexing the last 3 digits from 0 to 257. It takes less than a second to grab the host name of ip addresses that are alive, but for the rest that are down, it takes 10-20 seconds before returning the ip addresses. How can I send a packet to see if the host is up before asking for the hostName. I tried creating a socket to connect to various ports but even that takes 10-20 seconds for downed hosts. Thanks in advance.

You want to do it fast?
You can't, that isn't how sockets work. Sometimes it takes minutes to connect.
If you are scanning local addresses and it takes that long, then something is wrong with your intranet and you need to talk to your sys admin.
If you are scanning internet addresses then that is how long they take (assuming that something is not wrong with your internal network.)
You can use a tentative approval process and threads to allow some processing to proceed. That, of course, depends on what you are doing.

How to get the list of Used Quotations & Non Used Quotations

Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.

ok.

How to I get the card information to none so I can download my free apps it won't let me it keeps asking for card information

How to I get the card information to none so I can download my free apps it won't let me it keeps asking for card information

Is it a new account ? If it is then unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
then credit card details will need to be entered before the account can be used to download any item from the store - you should be able to remove your card details after entering them

How do I get rid of and prevent non-content mails dated 1970-01-01?

How do I get rid of and prevent non-content mails dated 1970-01-01? They come by the hundreds!!

CSS:
#navigation {margin-top: -3px;}
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

After downloading os5.0 ,none of my contacts reloaded from the backup. Any idea's how to get them back.

After downloading OS 5.0, none of my contacts reloaded from the backup. Any idea how to get them back?

I am having the same problem.....13 years of my HUSBAND'S business contacts are gone. Let me know if you figure this out!

I'm getting a error that says NONE when I'm trying to reset up Adobe Photoshop Element. How do I fix it?

I'm getting a error that says NONE when I'm trying to reset up Adobe Photoshop Element. How do I fix it? I already have the program but updated my computer from Vista to windows 7, and it didn't transfer over. What do I do?

Sorry, but I'm not clear when you get the message NONE.
Which version of Photoshop Elements do you have?
Have you installed Photoshop Elements on your Windows 7 system?
What are you doing when you get the message NONE?
Brian

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

I had a "pdf export" plan and upgraded it to "pdf pack" plan and it was charged the full price of the new plan in my credit card. How to get back the non used part of the old plan?

Hi edilsoncf,
I've seen your question on several forums, and responded there. Did you get your subscription sorted out?
See: How do I get a refund if I have multiple Acrobat service subscriptions?
Best,
Sara

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

The only ways I know of for email to get sent to an account are:
1. It was addressed to that account. Someone used that email address to send you the email.
2. It was forwarded to that account by the account to which it had been addressed. I am not aware of Mail having this feature but it is often a feature provided by your ISP that you can turn on by logging into your account via the Internet and setting it up. I assume you have not done this, though.
With several email addresses in the same Mail client, you have to be careful which one you are sending from. If you send from the wrong address, any replies will come back to that same address. I make this mistake all too often.

How to get Sil 3114 to be NON raid on Neo4 platinim

Similar Messages

Maybe you are looking for