How to get slider window in javafx

How to get Slider window in javafx when we click on button slider window should open with sliding effect and when we clock on close button of slider window it should be close with sliding effect....plss send the link regarding this or if possible then plss send the code.Thanx inadvance

Have a look at the following samples, and if they are not what you are looking for, please post back with a more elaborate description of your issues and an sscce of what you have tried so far (even if it doesn't function as you want it to).
Experiments with Java: Sliding in JavaFX (It&#8217;s all about clipping)
Example of a JavaFX Pane which slides in and out on command.

Similar Messages

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

How to get standard Windows (7) title bars in Visual Studio 2013 Express?

With the "title bar" background color changing when active vs inactive like all my other Windows.
Using Win 7 in "Windows Classic" theme.

Hi sponge_bob_128,
>>How to get standard Windows (7) title bars in Visual Studio 2013 Express?
Based on your issue, could you please tell me more detailed message about your issue.
For example:
(1)What did you would like to do in the Visual Studio 2013 Express?
(2) If you want to develop a program like the "title bar" background color changing when active vs inactive from the VS2013 Express.
Generally, I know that when we set the theme as "Windows Classic" theme on the Windows 7 and then start two VS windows, it will show an active VS window like the following screen shot.
To further help you solve this issue, please tell me more detailed message for me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the windows username in jsx

Hello,
I have a JSX script in "My Documents\Adobe Scripts" to make it trusted script. I have another text file I need to read from JSX. Since the location depends on logged in user, I need to find the windows username. If anyone know how to get the windows username from jsx please reply.
Thank you very much.
Regards
Nima.

Hey,
You can get username like this:
var myUsername = $.getenv('username');
You could also get My Documents folder like this:
var myDocFolder = Folder.myDocuments;
Hope that helps.
Marijan (tomaxxi)
http://tomaxxi.com/

Instructions immediately talk about Firefox Window, but doesn't say how to get this window.

It's taken me almost an hour to get to this point. I am technologically challenged. I have an old version of Firefox. The instructions immediately launch into the "Firefox Window" but says nothing about how to get to this window. Where is this window? Maybe I should just download Opera?

What instructions are you talking about and what do you want to accomplish?
Note that it is not safe to use such an outdated Firefox version that has known disclosed security vulnerabilities, so please update to the current Firefox 33 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version
You can use one of these to start Firefox in <u>[[Safe Mode|Safe Mode]]</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to get a windows 8 64 iso?

Just got a brand new MSI GE60 laptop with Windows 8 64 pre-installed; does anyone know how to get an ISO of Windows?? I know about the MSI Burn Recovery stuff, but that simply makes an image of your entire system, not simply windows 8 .

http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/where-do-i-find-the-windows-8-product-key-when-it/d4c5c0c1-825d-47f2-9bed-d9625c7e68ff

How to hide main window in JavaFX 2.0

I want to hide application window in JavaFX 2.0, calling hide() on Stage object terminate application. How to hide main window and left application running?
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Group;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.layout.BorderPane;
import javafx.stage.Stage;
public class SysTray extends Application {
     public static void main(String[] args) {
          Application.launch(SysTray.class, args);
     @Override
     public void start(final Stage s) throws Exception {
          Group rootGroup=new Group();
          Scene scene=new Scene(rootGroup, 800, 600);
          s.setScene(scene);
          Button hide=new Button("hide");
          hide.setOnAction(new EventHandler<ActionEvent>() {
               @Override
               public void handle(ActionEvent paramT) {
                    s.hide();
          BorderPane mainPane=new BorderPane();
          mainPane.setCenter(hide);
          scene.setRoot(mainPane);
          s.setVisible(true);
}

That's interesting. I just checked and it looks like http://download.oracle.com/javafx/2.0/api/javafx/stage/Stage.html#close%28%29 is also an alias for setVisible(false);
A little weird that they would have two aliases for such a thing. I'm guessing that setVisible isn't supposed to end the application, but what with JavaFX still being in Beta, the given functionality is acting as a placeholder. Maybe you should check [url http://javafx-jira.kenai.com/]Jira to see if this is already an issue. If not, you should probably file it to make sure.

How can get my windows 7 professional serial

Hi,
How & where can I get the windows 7 professional key that comes with the W510. I have wiped out the old one and installed Linux and now I want to install windows. On my old thinkpad the sticker on the back contains windows serial but not on the W510. How can I get this back. Should I contact the tech support ?
regards

that was a bumper
thanks

I'm no longer asked if i want to purchase a song. how do get that window back?

i'm no longer asked if i want to purchase a song. without that caution i've already purchased 2 songs that i don't want. how do i get that window back?

Preferences --> General --> Reset all warnings. For anything beyond that ask in the Premiere forum and provide the necessary technical details.
Mylenium

How to get back windows that are off screen?

I use my macbook at work with one attached display, and then at home with a different attached display. The two extra displays are different sizes. A lot of times when I plug it into the smaller of the two displays, some of the windows come up off screen and I can't figure out how to drag them back on. For example now I have a Microsoft Word window where the bottom half is on the screen, and the top half is up above the top of the screen. The only way I know to move a window is to grab the top edge and drag it, but the top edge is off the screen so I can't do that.
Also sometimes a window is bigger than the screen height, and the only way I know to make it smaller is to drag the bottom right corner, but the bottom right corner is off the screen and the window height is bigger than the monitor height.
Is there a way to get these windows back all the way onto the screen? Thanks.

This is one of the most serious flaws of the Macintosh, and in many instances there is just NO answer. You could resort to writing a script using the Script Editor, but this seems a tough way to get round what is essentially a bug in the OS - it has been there for over 20 years and I don't think Apple are about to realise that the age of multiple screens and changing screen sizes is here NOW and it is time to change so we can resize from any border like all other modern OSs.
If you want to try the script approach - try this link for help:
http://www.transparen.com/macintosh-technical-support-group/window-offscreen

How to get Preview showing with JavaFX 1.1?

Since I updated JavaFX to 1.1 from withing Netbeans 6.5, I cannot get the Preview window to show, instead I get an error message about local port 1099 not accessible.
I find it strange since it is the local port for JBoss on Mac OS X.
How can I get it to work as it worked on previous release?

Bad news. I talked to the developers of the preview component and it looks like one cannot change the port in the current version. Created an issue for this: http://www.netbeans.org/issues/show_bug.cgi?id=159660
Looks like you have got to change the port in JBoss.

How to get New Window without Variable Entry screen from one Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to Get New Windows Setup Disk

I got an r61i with Windows XP a couple of years ago. I purchased another hard drive and installed Linux on it. That is what I normally use, but, I kept the drive with XP when I need to use Widows.
I seem to have lost the drive with XP on it. I guess I'll have to get another drive and get a new setup disk, but, I can't find out how on the Lenovo site. I bought the computer new (through CDW). I saw another post where someone with the same computer downloaded Windows XP, but, I can't find any mention on the Lenovo site of either obtaining a CD or downloading.
Does anyone know?

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4M7HWZ#purchase
start here to get restore media.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to get slide change without a noise like a camera shot?

I have imported a PP2013 slideshow into CP 8.
The animation is working correct.
But when the slide changes to the next one,
there is a noise lik a camera shot.
Where can I eliminate that,
Thanks

Hi Manoj,
Correct, when you query the CMS database it will return the info for the object and not the source.
In code you can use this for Crystal Reports:
reportClientDocument.SummaryInfo.( multiple values )
This is the info saved with the RPT file, you can also use Windows File API's to get the same info.
For WEBI and DESKI doc's it does not keep that info in the file system. You may want to look at the file system properties in the FRS to see if any info is kept as it is in RPT files but we ahve no API to get the info.
Thank you
Don

How to get preinstalled windows 8 x64 oem?

Hey there. I have a laptop hp 17-e019dx. It was preinstalled windows 8 x64 oem. Later I installed ubuntu and delete all data on the hard disk.
I now want to install windows 8 x64 oem. But I do not have windows 8 x64 oem.
How to obtain a preinstalled windows 8 x64 oem?

erico wrote:
If not, you can purchase a usb recovery flashdrive from HP. The cost is minimal.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en&product=6627485
If you use this option, then how can I get in Belarus (Gomel) if the input fields for zip code contains 5 characters, and for Belarus Gomel (246000) zip code contains 6 characters?
https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=729076-001&cc=us&dlc=en&lc=en&os=4132&pr...
I understand this service extends to the USA and Canada?

How to get slider window in javafx

Similar Messages

Maybe you are looking for