How to get Solaris 10 to boot from the CLI instead of the GUI?

I tried searching on the site but was unable to get useful information from setting up Solaris such that it boots to command prompt instead of the GUI. Any help or suggestions would be appreciated.

This will also work if you're running out-of-the box Solaris 10:
svcadm disable graphical-login/cde-login:defaultThe problem with doing it that way is you then can't use your Solaris host to run SunRay thin clients. If you need to use the box as a SunRay server, you'll have to remove the reference to the :0 display somewhere in /etc/dt/config/Xconfig, IIRC.

Similar Messages

I need to know how to get my phone back from itunes it was downloading the ios update, found an error and wont let go of my phone iphone 4s

download did not work help

What do you mean "get your phone back"? What error did you see exactly? Was this error on the phone or the computer? Please provide all of the information about the error. What computer OS are you using?

How can I import selected images from a folder instead of the whole folder in iPhoto 9.5.2?

Hi there,
I was trying to help my parents import some photos from a folder they have created with photos from their holiday. They only want to import select images from this folder into iPhoto. I said it would be easy and they can do it in 2 ways. First, they can drag and drop selected photos from their folder into iPhoto - and this works for them. However, more convieniently, they can click file>import to Library and then select the photos they want by going into the folder... Well that's how it works on my iPhoto '11 at least. When they showed me their screen via Skype (they are running iPhoto 9.5.2), when they click import to library, and try to go into the folder containing their photos, it imports the whole thing and there appears to be no way that they can enter the folder to select just a few photos from what I could see.
Does anyone know anything aout this problem?
Cheers.

What view are using in the Import dialogue. Column view might be easiest to navigate.

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

My mini died. bought one used from a friend... all of my songs and books are on my iPhone, and I cant figure out how to get them onto this new computer. this is frustrating. the things i really want are purchases I've made from itunes store... help

My mini died. bought one used from a friend... all of my songs and books are on my iPhone, and I cant figure out how to get them onto this new computer. this is frustrating. the things i really want are purchases I've made from itunes store... help
!!!!!

Hey kevyg3,
I was able to find an article that I believe will help you move your iTunes purchases from your iPhone over to your new computer:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Hope this helps,
David

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

Qosmio F60-14K - Can't get it to boot from the SSD

Hi
Im trying to install a new SSD disk, but cant, because I cant get it to boot from the SSD, "Insert a system start disk" Works fine as a USB, even installed Windows 7 on it and tried to boot from it but with out any luck.
All I havent tried are to switch between IDE/AHCI, but that because I dont have that option in BIOS. I think I have tried everything I can test, any tips/help would be much appreciated!!
And so to the BIOS part a joke to call bios all you can do change clock settings and the bootorder more or less!
Anywhy to get more options?
thx
//Henrik

I installed it on my desktop cuz I couldnt install win7 when it was in the laptop it said it wasant a start partision, but it didnt help since it didnt boot from it even with the OS installed on the disk.
Since I cant boot from the ssd it dosent matter what I install on it.
Yeah aslong as u dont want to change anything the set bios seams ok but not as soon as you want to change anything like in my case.
something I really really miss is the fan speed control and ofc the acpi and maybe some chipset settings.
but aslong as I get my SSD to work Im more then happy with the bios settings ;)

Re: Sun Fire v490 / Solaris 9 booting from CD, Network problems

Hi Folks,
Apologies in advance for the length of this post.
For the purposes of disaster recovery I have built a custom CD based on the Solaris 9 installation disk with our third party backup / restore software included on it.
After the rcS script has setup networking it runs a bash shell so that I can label / partition / format the hard disks as necessary then use the third party software to recover the system.
This works fine on almost all the machines we've tested (Ultra 10s, Ultra 30s, FS Prime Power 400)
On one Sun Fire v490 however I seem to have problems with networking...
Part of the customised rcS script makes the following call
ifconfig ce0 10.4.20.20 netmask 255.255.0.0 upto configure the NIC. However when the rcS script leaves me at the shell I'm unable to ping anything.
The output from ifconfig - a looks like...
lo0 flag=..
inet 127.0.0.1
ce0: flags=1000823<UP BROADCAST,NOTRAILER,MULTICAST,IPv4>
mtu 1500 index 2 inet 10.4.20.20 netmask ffff0000 broadcast 10.255.255.255 ether 0:14:4f:0:be:beThe only thing that looks odd to me is that there's no "RUNNING" entry for ce0 that I get if I boot from the same CD on my other machines (Ultra 30s & Ultra 10s)
The broadcast address looks wrong, but again it's the same when I boot from th CD on my other test machines and they all seem to work.
I'm pretty sure that ce0 is "plumbed", 'cos if I "unplumb" it from the shell prompt then it doesn't even appear in the output from ifconfig.
Someone has suggested that it's a connectivity issue, but if I boot normally rather than from my custom CD then the networking is fine.
As a test I tried removing the drivers for hme from the CD then booting one of my Ultra30s but in this case the entry for hme0 was completely absent from the output of ifconfig.
So I've concluded that the driver for ce0 is at least there on the v490.
So for the moment I'm confused as to why the ce0 appears on the output for ifconfig, but has no RUNNING 'flag'
Anyone got any ideas
Many thanks in advance
Regards
Kevin

hello
you have an error in your interface configuration
you should have
you are using a class A ip adress but with a class B netmask
ip 10.4.20.20
netmask 255.255.0.0
broadcast should be 10.4.255.255
Message was edited by:
jerem81

How to get warranty service claim from nokia c5-03...

how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
Solved!
Go to Solution.

i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

How can I set to boot from MAC OS by default after I installed Windows?

How can I choose to boot from MAC OS by default after I installed Windows? I have a MacBook Pro Leo 10.6.8. I used bootcamp to install Windows XP SP2, but now if I don't press the option key it will start up with Windows, and I don't want that. Thanks for any help.

Select it in the Startup Disk pane of System Preferences.
(61137)

I have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

i have a seagate 1tb hard drive and a 16gb memory stick, how do i transfer avi files from one to another as the click drag and drop wont work, please help?

Greetings,
What happens when you drag it?
Make sure the drive you are moving the files to has enough available space to receive the file:
Click on the movie file and go to File > Get Info and note the "size"
Check the drive to which you are moving the file to make sure it has enough available space: https://idisk.me.com/madisonfile-Public/web/finder-drive-available-space-and-for mat.html
Also note the format of the drive you are copying too. If it is not Mac OS Extended or FAT (not recommended unless you are taking it to a windows computer) then that may be the issue.
Hope that helps.

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

How to get RMAN catalog information from Target database?

Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
Thanks

If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale

How to get name of table from front end

Hi,
How to get name of table from front end in EBS 11i?
thanx
Ashish

Hi
Sandeep is correct. The "Help"/"Record History" will give you the table/view name, but sometimes this particular menu function give me a "Record History is not available here." error message.
I then use the following menu functions (this will also give you additional information, like column details).
1) Open Forms
2) Click on Help/Diagnostics/Examine (*you might have to enter the APPS password at this point)
3) Change "Block" to "System"
4) Change "Field" to "Last_query"
The system will populate the "Value" field with the query that was executed in order to populate the form.
Regards
Frank

HT1937 how to get back 3g option from lte on iphone 5s

how to get back 3g option from lte on iphone 5s

You don't. The presence of that option is at the discretion of your carrier.

How to get Solaris 10 to boot from the CLI instead of the GUI?

Similar Messages

Maybe you are looking for