How to get sound into MBP?

Hi!
I wonder if somebody knows what cable I need to get sound into my MBP? I know it is digital so what
device do I need? I have an Apogee Mini Me device with spdif out but it's not the same kontakt.
Any ideas?
Peter

Ok, thank's!
I own one of these:http://www.motu.com/products/motuaudio/8pre/optical.html
It has 8 adat (optical) outs, do you know if it will work with all 8 or just 2 channels, or at all
since even if it's optical it is adat, well I'm a little confused about this.
The units mensioned with the cable was mostly portabel players.

Similar Messages

How to get sound from MBP to TV through thunderbolt to HDMI cable?

I have a Mid 2009 MBP and have been running it through to my Samsung TV for a while now via thunderbolt to HDMI but have only just wondered whether i can get the sound coming from my TV rather than the built in speakers on the macbook.
I have tried going to System Preferences - Sound - Output. but there is no option for display sound or thunderbolt...... i suspect it's because i have a rather old macbook but it doesn't seem like an option that would only come on newer models.

Don't worry about this post..... doesn't make sense. Mid 2009 models do not have thunderbolt ports nor do they support audio through HDMI : (

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

I have Maveriks. I downloaded numerous ACID Fonts and purchased Stuffit as instructed by ACID Fonts in order to use them. However, now I am unable to figure out how to get them into my Font Family drop down list or insert into Pages. PLS HELP!

Hi FancyJean!
Here is an article for you about using Font Book and installing fonts that you have downloaded:
Mac Basics: Font Book
http://support.apple.com/kb/ht2509
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Anyone know how to get subtitles into Quicktime movies?

With Quicktime now supporting subtitles. Does anyone know how import subtitles into Quicktime movies?
After following the instructions from Apple's support pages for timed text, I tried pasting in timed text. This displays text below the video in an ugly black bar, but isn't recognised as subtitles by Quicktime. Ideally, I'd like to convert srt files into a compliant format, but without knowing the correct format, it's a little difficult.

There haven't been any really clear instructions on how to get subtitles into QuickTime movies yet. Apple has posted a QuickTime component that will convert an SCC file into QuickTime and you'll find that here.
http://developer.apple.com/samplecode/ClosedCaptionImporter/index.html
Also, a discussions user has posted instructions on how to CC a QuickTime movie in this thread.
http://discussions.apple.com/thread.jspa?messageID=5756610&#5756610
And here's another thread you may find helpful links in.
http://discussions.apple.com/thread.jspa?messageID=5720947&#5720947

I'm trying to make a holiday card, but can't figure out how to get photos into the card.

I'm trying to make a holiday card, but can't figure out how to get photos into the card.

Selectto( s) and create the card - if you want to add more photos ot it drag then to the card project in the source pane on the left
LN

How to get text into a timeline

I do not understand how to get text into a timeline in Premiere Pro. I can work in titles more or less, change fonts and sizes, but I do not get how to insert the text into the timeline. Am I even starting at the right place, going into "titles" first?

Once you have made your title, drag it from the project panel to V2 on your timeline above your other footage.

How to get tabs into a column on left edge of Firefox window?

How to get tabs into a column on left edge of Firefox window?
I've looked extensively for the answer but haven't found it yet.

I found the Tree Style Tab ad-on does this.
Mike

How do I get sound into the computer from my webcam?

Hello,
I have a mac pro intel 8-core and need to use webcam with skype. The thing is, there is no build in mic on the 8-core and there is no mini audio input jack so how do I get the sound in from a webcam?
In fact, are there webcams available that have the built-in mic sending the signal through USB or firewire? The only webcams I found had a mic with a mini-audio plug for plugging into the computer. But of course, there is no jack to plug it into.
Besides using a firewire camcorder, is there anyway to get sound in from a webcam?
Thanks so much,
Kirk

Hi
I'm using Skype with a Logitech Pro 9000 camera with built in Mic.
I didn't need special drivers, it worked as soon as it was connected. It was configured in -
System Preferences - Sound - Input - then select Logitech Camera, USB and you are done.
Regards, Ian Macdonald

Does anybody knows how to get sound from my Mac Mini into my Bose Lifestyle V35?

Hi, I am trying to get sound from my Mac Mini into my Bose Lifestyle V35...I get perfect image but no sound... any idea? Thanks

You don't mention which version of Mac Mini that you have. Here is some info from Apple.

How to get videos into itunes

i have some music videos in realplayer, is there a way to get them into itunes? i can go to them and click 'open' but it doesn't do anyting. any suggestions?
and also, there are 2 other videos that i put in realplayer's favorites, but when i search for them in itunes, (or any other music software) they don't show up, why is this and how and i get them to show up?
and when i try opening the videos in quicktime 7, it says they aren't movie files.
thanks for any help

okay here it is.
1.go to google, search for videora, find the videora converter (thats free) DOWNLOAD IT
2. start up the videora converter and click transcode new video, find the video in your files from ares/limewire or whereever and click it.
3. see the thing beside it that says "New transcoding", once you've clicked a file from #2 press START (do not fiddle with the settings they make it so that your ipod reads the information)
4. it will take minutes to hours depending on how big the file is.
5. once it is CONVERTED (be patient) : go to itunes click file at the top -> go to add file to library .
6. okay your file is in a folder that looks something like this: C:\Program Files\VideoraiPodConverter\Videos . therefore you need to find wherever you uploaded your program (videora) and find the file
labelled "videoraipodconverter" (unless you changed it)
7. once you find this file (in program files most likely) click on "videos" and your video should be there, uploaded and converted
8. there, you're done and it should play both sound and video on your ipod
okay, so enough topic dicussions about this.
please leave comments where i am too vague or it doesn't work and happy holidays
PS: if you're downloading from a CD or DVD you have to save it in a file before you can convert it. Try saving it in "my music"
THESE INSTRUCTIONS ARE FOR windows XP not MAC
thanks,
KM
(((MACleanKara SHowed me how to do this he is the man.)))

SQL query - how to get parameters into a function within a SELECT statement

Hi,
I have SQL query roughly as follows
SELECT A, B, C, MAX(CASE...) AS "D_NAME", FunctionX(B, C, "D_NAME")
FROM...
WHERE...
How to get alias "D_NAME" as a valid parameter into FunctionX?

Hi,
user8819407 wrote:
Hi,
I have SQL query roughly as follows
SELECT A, B, C, MAX(CASE...) AS "D_NAME", FunctionX(B, C, "D_NAME")
FROM...
WHERE...
How to get alias "D_NAME" as a valid parameter into FunctionX?Either
(1) repeat the calculation or
(2) compute it in a sub-query
Here's an example of (2)
WITH got_d_name AS
    SELECT A, B, C, MAX(CASE...) AS "D_NAME"
    FROM...
    WHERE...
SELECT A, B, C, D_NAME, FunctionX (B, C, D_NAME)
FROM    got_d_name
;A column alias (like d_name) can be referenced in the ORDER BY clause of the query where it was defined, but that's the only place in that query where it can be referenced.

How to get sound into MBP?

Similar Messages

Maybe you are looking for