How to get sound working on W2k on Tecra 8000?

Is there any way to get the sound to work on a Tecra 8000 using windows 2000 pro? I just upgraded from win 98 and the audio driver installs the Yamaha opl3-sax, but there is no sound. I've tried uninstalling and reinstalling different drivers, but none seem to work.

Hi
I would also recommend checking the device manager. If there is no yellow exclamation marks near to the sound card so I would say the sound driver was successful installed and there must be something wrong with the audio settings.
Did you check the sound and audio devices in the control panel? You should check all the sound controller if they are set to the higher level.
Furthermore I would recommend checking the volume controller at the notebook side. Sometimes peoples forget to set it. ;)

Similar Messages

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

TS1814 I have an iPhone 3GS and was trying to restore it. Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do. Any ideas on how to get it working again?? I'm dying without it!

I have an iPhone 3GS and was trying to restore it...
Now it won't let me activate my phone and my itunes tells me I have no SIM card inserted when I do.
Any ideas on how to get it working again?

This means that the phone was previously hacked to carrier unlock (unauthorized unlock), and when you restored, the hack was removed and it became re-locked to its original carrier. It will now accept a SIM card only from that carrier.
Your only option is to contact the carrier it's locked to and enquire if they will provide authorized unlocking. Not all carriers will unlock and those that do usually have requirements and qualifications - i.e. you have to be a current or former customer in good standing.

Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

Can you check system update? I think I did a system Update 1st, a day before installing OSX Lion and there is a Safari update. If not try logging in iCloud.

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages. How to get it working?

I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.
How to get it working?

My guess is that you won't be able to do much if you threw away the serial number before using it. The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
Beyond that you need to resolve serial number issues with ASdobe Support directly. Here is a link for chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

I guess but that was what I was on earlier but it wasn't of much help.
I need to chat with an apple person but don't know how if I don't have a phone accessible.
Is there a way to connect thru a laptop or something?

How to get a work roster into ical

Hi there
Does anyone know how to get a work roster into ical so I can then sync it with my iphone and view my roster on my phone?
Any help would be greatly appreciated.
All the best
Enigma

Depends on the format of the "work roster" - if it's a calendar file, you can import it with File menu > Import. If it's some other file type, you may not be able to import it and need to enter the events manually instead.
You might try the iCal forum.

How to get QTP11 work with FF17. Unable to get Quicktest Proffessional11 plugin

How to get QTP11 work with FF17. I have already installed Patch_090 and 0122.
Unable to get Quicktest Proffessional11 plugin even after creating temp directory, into FF “extensions” directory.
Please help

If I may ask is there a recommended version of Firefox for the extension? [http://www.qatutorial.com/files/QTP_Install_Guide.pdf] is all I could find on how to install the software, is this the right add on?

Is fast boot not working for you? This is how you get it working correctly...

Ok so after two days of trying to register on this site, the 50th activation email finally worked...
Anyway I was trying to figure out why fast boot wasn't making much of a difference it seemed like once it booted quick but may have just been random. My setup is Z77a GD65 with two Samsung 830 128GB in RAID 0.
It was taking about 30 seconds from pushing the power button to getting into windows and that was with fast boot enabled. That did not seem right. After messing around for a while and researching I came across many mixed reviews about doing this or doing that. Windows 8 Feature... The windows 8 feature is from my understanding and research for secure boot...
If your just wanting the faster boot times using fast boot. Just enable MSI Fast Boot, and install the Fast Boot utility so you can get back into the bios. When you enable fast boot, this disables usb devices etc so you can't get into the bios when booting. This little utility is really useful as it will boot you from windows right into your bios etc. KEEP READING STILL NEED TO DO MORE!!!!!
Now for fast boot to work correctly you need to make sure you installed windows 8 in uefi mode. I read a couple people ask this question but I don't think they got the right answer or people just said yea I have a uefi motherboard and windows 8. That is not what people have been asking you.
To get this working correctly format a flash drive using rufus while choosing your win 8 iso.
You can get that here and it explains it and the settings to choose. I had to break up the link as the forum would not let me post the link. Maybe a mod can fix the links.
eightforums .com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows.html
After that is done you should then see in the bios a boot option for a UEFI usb flash drive. Make sure your boot mode is using UEFI. Otherwise it will be using legacy mode and not show uefi devices. I selected UEFI only just to make sure. Then choose this uefi flash drive as your first boot device and save and reboot to install windows from this uefi flash drive.
It should look like this
Once your at the install screen delete your partititons from the drive you are going to install windows on. So that it is unallocated. Then select new and apply. This will create 4 partitions. Here is a nice quide for doing that and explains it all. eightforums .com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows-8-a.html
Basically your partitions should look like this.
Once you have installed windows you will then know if you installed in uefi as your splash screen will be different. Instead of just the MSI splash screen you will then see the windows loading square/circle as well on this same splash screen. You will now have a boot option called UEFI Windows Boot Manager. Select that one as your first boot device and then enable MSI Fast Boot.
Sorry if this post is cluttered I will add some more pics and clean it up in a bit. It's really early.

Quote from: RemusM on 22-February-14, 01:41:27
If one SSD fails, you lose the data on both SSDs.
In your case, you lose 128 GB.
Period.
You continue to argue on silly things and you miss the main point:
RAID 0 on SSDs does not make any sense.
RAID 0 (striped volume) has been designed for spinners.
It's a workaround to reduce the access time (a few miliseconds) caused by the mechanical parts of the HDD.
For a SSD (with a few microseconds access time) does not bring any boost.
http://www.tomshardware.com/reviews/ssd-raid-benchmark,3485-10.html
On contrary: shorter lifetime for both SSDs
So (for the last time) the best solution in your case is:
Put the OS on the first SSD (drive C) and the other programs/games on the second one (drive D).
There is no need to kill both SSDs at the same time (for nothing).
And finally, talking about this silly "fast boot" of yours:
5,10,20, or 30 seconds is something irrelevant.
Simply because you get the max speed on an "empty" OS only.
With every installed app (most of them come with bloatware anyway), your boot time is getting longer and longer.
On the other hand, who cares if it takes 10 or 20 seconds?
Only someone with mental problems needs to boot up the computer all day long.
99.99% of the users boot up the computer once or twice per day.
From my point of view, this topic is closed.
You're free to think and do anything you like.
I take it you are extremely hard headed and only view this from your opinion. Even with your logic of "If a drive fails you lose 128GB of data is wrong." If a drive fails I would lose 256GB of data if the RAID was full...
The way you originally worded it made it sound like you thought RAID 0 only uses the capacity of one drive... I was trying to clear that up by saying it uses the capacity of both drives and ends up being 256GB capacity but I guess you couldn't wrap your head around what I was trying to say.
Think what you want... but everyone I know on all of the tech forums I have been on for years, "EVGA, HARD, etc" 99% of users prefer running OS in RAID 0 on SSD's. Anyone with half a brain does not store important files on a RAID 0 array. I even created a new thread on EVGA asking how members prefer installing Windows with two identical SSD's. Most of them said they always run a RAID 0 for OS on SSD's. A couple others said they prefer running Windows/Programs on one SSD, and Games on the other. Usually that is because when they reformat they can simply re initialize the steam directory on the second SSD and then you don't have to reinstall all of your games.
I respect your opinion but saying RAID 0 on SSDs does not make any sense is crazy talk. And that fast boot is only for people with mental problems lol... you sir have issues. Why do you think they made this feature? Why do people OC? A lot of people do it because it is fun, they are enthusiast, and they like to push a system. Why do people buy SSDs if its only a few seconds faster when you only turn on your computer once twice a day? When you only open an app or launch a game a couple times a day.

My i phone plays music but the apps don't make any noise. Anyone know how to get sound out of apps?

Does anyone know how to get app games to make sound. The i pod works fine!

You might have turned of the sound in settings under sounds drag the ringer option all the way. Hope this helps.

How to get passwords working in Pages documents?

I've set a pages document to require a password to open. When I open the file, it opens without requiring this password. Any thoughts on how to get the password working? The doc is on icloud, could that be a factor?

Finally, I've added a new field movement in transaction GCF2 with sender tables ACCHD, ACCIT_GLX AND ACCCR. The joint venture name comes only from FI documents and not JVA documents, so, only JVA information of P&L accounts is available.
Best regards,
Alfredo Del Portillo

How to get xbar working?

I have kdemod 4.2 and I can't get Xbar working with Bespin. All I get is an X icon saying Cannot find requested component : xbar

pressh wrote:Have you compiled bespin against kde 4.2 or was it compiled against an earlier version?
Ok.. I guess an earlier version.. How do I get the latest bespin?

HT3529 I've never been able to use iMessage or FaceTime and its really making me mad...any idea how to get it working?

I've had my iPod for over six months and I haven't been able to access FaceTime or iMessage...not to mention my camera stopped working for no reason!

For the camera problem try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order
For FT and Messages:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
How to get started with iMessage | How To – CNET
iOS 5: iMessage not working – how to fix - Apple Toolbox
Also:
- Go to Settings>General>Time&Date and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Settings>General>Reset>Reset Network Settings. You will have to reenter all network passwords.

How to get sound working on W2k on Tecra 8000?

Similar Messages

Maybe you are looking for