How to get source code for commands like diff or cat
Hi all
I'm learning c programming and i'd like to read some code for the basic commands on the linux system
I remember apt has one such option that allows getting pakcage source code
is there a similar one for pacman ?
or do i have to search those source code myself ?
and also in BSD system all the codes are availeble in a code repository
thx
diff and cat. Or was that too literal?
Last edited by Ghost1227 (2009-04-18 23:57:55)
Similar Messages
-
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
How to Get Source Code of Standard ESS Component.
Hi,
I need to implement SAP Note 904107, in ESS ( Personal Info.) package. However no tracks are maintained in NWDI for ESS.
Please suggest me from where I can get Source Code for Standard SAP Web Dynpro component VcPerFamilyBEReview .
I read in some blogs and its suggested to create Track in NWDI using ESS package which is deployed on server. Please provide detail procedure, doc. and links for this.
If any other approach is there to get sorce code please suggest.Hi,
VcPerFamilyBEReview component is found in the DC sap.com/essbefam
check these links to create track in NWDI
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f]
[https://www.sdn.sap.com/irj/sdn/wiki?path=/display/java/netweaver%2bdevelopment%2binfrastructure%2b(NWDI)]
Regards,
vv -
How to get source code and build files for Eudora 7, and price?
Looking for source code and build/make files for Eudora 7 to port to Win7 and Ubuntu 14. Where is a source for this and what is the cost?
You best ask qualcomm. It is their intellectual property.
Eudora OSE was based on Thunderbird and the source code for the Penelope add-on is open source (that is what made Thunderbird over to OSE) -
How obtain complete source code for applet demos?
I would like to obtain the source code for all the class files for the applet demos, especially the molecule viewer. Some of the class files do not have corresponding java files made available. Who can help me out?
Which class files are missing?
If you go to this site, select the applet of interest, the link at the bottom of the page (that is, the page with the running applet in it) takes you to the source. The file at that link includes all of the classes in the applet.
http://java.sun.com/j2se/1.4.2/docs/relnotes/demos.html
-John -
How to get creator codes for search?
How do you figure out/use the creator codes for seaching a file? In the good old OS days (i.e Mac OS) you dragged a file of the kind you were looking for into the search box after selecting "Creator is __". It doesn't work with OS X.
I'm trying to find a Word document that I know was created in a 3 month window. Using Search for those dates and file type "document" has so far turned up over 8000 files, won't stop, and looks like it's returning almost exclusively files with long numbers ending in .cache, for example 123456789-0123456789.cache
ARgh!Marlinespike
Sorry, I didn't realise that Find wouldn't get extensions that weren't visible!
How did you find "MSWD" was the code?I don't remember, I've known this for years! There are shareware databases available with lists of hundreds of codes. There are also shareware applications that will tell you the creator code and file type – but if you have the Developer Tools installed, you have a free application to do this, but it must be invoked from the command line:
GetFileInfo BS030218.doc
file: "/Users/michaelc/Documents/Correspondence/BS030218.doc"
type: "W8BN"
creator: "MSWD"
attributes: avbstclinmedz
created: 02/18/2003 19:27:31
modified: 02/18/2003 19:27:31The full path to the application is /Developer/Tools/GetFileInfo, but you shouldn't need to type all that since installing the tools modifies your $PATH to include "/Developer/Tools/". So all you need do is type GetFileInfo, then a space, and then drag your file into the Terminal window and press return. -
How to get Transaction code for SAP standard report painter in FI
Hi All -
Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
These report painters are created thru GR51...
Thanks,
KannanPlease refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].
-
How to get source code in the video examples
I'm wondering how to get the source code, which used in the
video training. Thank you very much.I don't believe that the source code is available.... however
you can do what I am going to do. On my 2nd round of going through
this stuff I am going to try to re-create that system in the
videos. So far it seems each step and every line of code is
shown... though there may be some things I have to get creative
with. :)
Someone else posted a link to get a csv of the employees
info, which can be used to create an xml file for the tutorials. -
How to get Source code of a Schedular Java concurrent program in Payments
Hi Experts,
I am very new to Java Concurrent program.
I need java source code of a schedule java concurrent program.Following are the details of Executable.
Executable :Format Payment Instructions
Short Name :IBY_FD_PAYMENT_FORMAT
Application : Payments
Execution Method :Java Concurrent Program
Execution File Name:FDExtractAndFormatting
Execution File Path : oracle.apps.iby.scheduler
I searched in execution file path,but i am unable to find required java source.
Please someone help regarding this issue..
It's Urgent Issue.
Regards
AmarHi Srini,
Thanks for reply...
In the attached template of concurrent program "Format Payment Instructions", i need to add voucher number in the template.
How can i do this?how to decompile the executable?
It is a check printing.
Please give me suggestions..
Regards
Amar -
How to get Source Code out of SCA File
I have a SCA file comprising SAP Ecommerce 5 solution. What I want to achieve is to get all the source code out of it including the original directory structure. Unzipping it doesn't give me the required results and requires a lot of manual work creating directories and more unzipping.
I tried importing it into a Local SC in NWDS but it complains that " Import (into source SC) not possible: SCA doesn't contain DC sources".
I don't have access to NWDI at this point.Hi,
For getting the source code of the Business Package Content, follow the steps below:
1. Make sure Source Archive is available for the Business Package.
2. Create a NWDI Track, and include all dependencies (check SAP Note : 1080927 - Creating CMS Tracks for common Application Types )
3. Once you have track in place, you can import the Track into NWDS
4. In Development Configurations perspective of the NWDS you can see the track.
5. Now create Project from Inactive Workspace to start modifying the code.
Check the link for general links
http://wiki.sdn.sap.com/wiki/display/JDI/NWDIRelatedNotesandLinks
Hope this helps.
Cheers-
Pramod -
How to access source code for checked in .sca files in the dev environment
Hello,
I am trying to do some CRM E-commerce development. The basis personnel has checked in all the relevant SCA archives listed in the setup documentation. He has since given me the Servername and port for accessing the NWDI that I can set in the Development Environment. I can log on to the system and see the repository browser with all the branches.
For example:
CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> active
CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> inactive
How ever there is no code there to sync. Is there something missing in our setup for the NWDI so I can sync the CRM E commerce projects to the local system and modify them.
Is there anything we have to do either in NWDI or in the IDE to see the source code to extend it.
Thank You for your help in this matter.
Sumit.Hey Pascal, Thanks for the help. We did a batch check in and the code did not go through. After we tried the check-in in the non-batch mode it worked.
-
How to get source code from portal app
Hi,
I have a successful Web dynpro portal application running, which I would like to modify. We lost the source code. Is there any way that I can get the source code from the portal?.
Thanks and I appreciate your help.
/Sunita.Hi,
You can extract class files from app.jar and decompile it(.ear->.wda) but it is only generated classes without metadata. Metadata is stored in .wda file but format is not compatible with studio. That all options you have.
Go through the following links, it will be helpfull to you
Some of the solutions provided in it
[Re: Retrieve the source code from .EAR;
[Restore source code from ear file;
Regards
Raghu -
How to get source code of ADF demo page.
I have used oracle ADF demo site for demo work related to graphs.
I want to download the source code of this demo. I mean jspx file, backing bean and style classes.
Is there any way I can download this source code?I believe there is no sense to use it without downloading it's code.
I want to download "Area graph Animation" from below link:
http://jdevadf.oracle.com/adf-richclient-demo/faces/feature/graph/animation.jspx?_afrRedirect=2611981845492287
Please help!
Thanks,
JaykishanThis does NOT have .JWS file as
The demo WAR is a JDeveloper Project packaged into a WAR file.
So creating a dummy application or open an existing application.
Select 'File' ----> 'New' --> 'Projects' and select Project from WAR.
Thanks,
Navaneeth -
TS1646 How want get Zip code for malaysia
How want get Zip code
I got a HP phone from my brother in US and the phone was sent to me. But when i turned on the phone it was lock.
But I had that the HP veer can help you purchase the phone when it is locked. -
How to get source programe for smartform
hi
i want to know source programe for smartform.
thanks .hi,
1. Go to the smartforms transaction.
2. Chose from menu Environment->Function Module.
3. Note the name of the fm.
4. Go to se37.
5. Place the cursor on the Fm name and do a where-used-list.
6. You will find the programs which use that fm.
or you can find it in NACE transaction
or in the table tnapr.
Rgds
Reshma
Maybe you are looking for
-
I am performing a data aquisition in one VI at 10000 Samples per second, then averaging 100 samples every 10 msec. This runs in a loop and I monitor the time of the loop. Another VI pulls the single point result of each 10 msec average and plots it
-
My 5th generation nano will no longer Sync my address book from my Mac. It gives me a message that I have no "Contacts", and asks if I want to create some. My address book is full of contacts, but for some reason it thinks it is empty. All the oth
-
How to create a proxy object for MOSS integration via WebDynpro For ABAP
Hello all, I have a question about the creation of an ABAP proxy class in SE80. When i follow this link: [https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6066fbe8-edc4-2910-9584-a9601649747d&overridelayout=true] i see on page 7 that there is:
-
Balance Carry-Forward Problem for Subledger Accounts
Hi Experts, We are doing the Balance Carry-Forward this Year 2012 and we are having problems with the amount to be carry-over of AP/AR Subledgers for this year. We checked the C/F Balance for G/L and there are no problems. When I go to tables KNC1 or
-
How to list the top 10 largest files in the current working directory ?
How can I list the top 10 largest files in the current working directory in Solaris ?