How to get step results without tracing?

Hi everybody,
I've written an operator interface in VB6 and I need the result of each step.
The problem is, that I can't use tracing.
Is there a posibility to get the results without tracing?
Thank you in advance for your help!!

Hi,
The Operator Interface displays each step in the window when tracing is enabled, otherwise nothing is displayed during execution for the sequencefile.
Providing the Report is enabled, either in the configuration report options or via the Sequence Callback ReportOptions and the Sequence being run is using the process model entry point (Single Pass or TestUUT's), a report will be generated. Tracing doesn't affect whether a report is generated.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • Forgot icloud password, how to get it recover without any question and also alternative email becuase someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    forgot icloud password, how to get it recover without any question and also alternative email because someone hacked my alternative email id. need password for using icloud hopefully i will get result from you as your earliest.

    I'm sorry, but I know nothing about iCloud email. I stayed away from iCloud email and only use iCloud for limited purposes.
    But take a look at this discussion and read the response from randers4. He is one of the iCloud experts in the Apple Support Communities.
    https://discussions.apple.com/message/24358339#24358339
    If that doesn't help, you might be better off posting in here where there are other more knowledgable iCloud users.
    https://discussions.apple.com/community/icloud/icloud_on_my_ios_device

  • HT1212 it says my ipod is disabled for 22 million minutes. any ideas on how to get it unlocked without restoring it to factory settings?

    it says my ipod is disabled for 22 million minutes. any ideas on how to get it unlocked without restoring it to factory settings?

    By restoring from backup or waiting
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • How to get a parameter without name in JSP?

    hi everyone, My question is how to get a parameter without name in JSP? I have two pages, 1.html and 2.jsp.
    in 1.html, I embeds some Javascript codes in HTML contents like below ( changed < to ( , > to )):
    function toSubWin( obj )
    window.open('test.jsp?'+obj.firstChild.toString(),'sw');
    (a onClick='toSubWin(this)'style="background:green")focus(/a)
    How can I get the parameter in 2.jsp?
    THANK YOU IN ADVANCE!!

    Does obj.firstChild.toString() evaluate to a "name=value" type of String ?
    Or better what does obj.firstChild.toString(),'sw' evaluate to ? It has to end up in a name=value format, else its just gibberish appended to the url.
    In the jsp, you have to obviously know the name to get the parameter. There's a getParameterNames() method which returns you a Collection of parameter names as Strings, you could probably use that to retrieve the param values.
    Then there's a getParameterMap() method which returns an immutable Map containing parameter names as keys and parameter values as map values. The keys in the parameter map are of type String. The values in the parameter map are of type String array.
    However to what ends you employ them in a program which doesnt know its inputs is a different story.
    cheers,
    ram.

  • I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

    I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
    I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
    The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

    The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
    So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
    As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

  • How to get query result in comma dilimited text or excel file?

    Does anybody know how to get query results in comma delimited
    text file or excel file, I tried spool abc.txt, but the result
    showed some ------ lines
    Thanks

    Try doing this in your sql scripts
    set heading off
    set pagesize 0
    set linesize 4000
    set feedback off
    set verify off
    set trimespace on
    set colsep ","
    spool output.txt
    select * from dual (or whatever you are querying
    spool off
    There may be a couple other set statement that you could add but
    this should get you started in the right direction

  • Call function in background task... How to get the result?

    I want to use Call function in background task parameter.
    But I cannot find the result of this function. (No export parameter, no table result, no exception)
    How to get the result of this function module? Correct or not?

    Hi Heinz,
    You can check the result in SM58 transaction.
    For more information pls. refer this thread :
    No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
    Best regards,
    Prashant

  • HT5361 I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

    I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

    Thank you Carolyn, How helpless you can feel without this App!
    Going into the App Store as you suggest, I see 'thee updates available", the first says, 'X RESTART', the second says, 'Garage Band, an error has occurred" (in red), and the third 'Memory Clean, UPDATE'.
    Am I correct in thinking that OSX is the problem, because it is waiting for a restart?
    Kind regards,
    Cy

  • Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again.  know how to get it quick without having to give my mac to the genius bar at apple store overnight

    macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again.  know how to get it quick without having to give my mac to the genius bar at apple store overnight?

    What is it you need - Windows installer disc or something else?  Your question is unclear.  Could you be more specific?

  • Af:query - How to get the result rowsets

    Hi,
    I have a requirement where i need to search the db rows on and append the results the adf rich table on each search.
    For this i am using af:query component. And trying to get the result rows for the named criteria.
    String mexpr = "#{bindings.DestinDescVOCriteriaQuery.processQuery}";
    processMethodExpression(mexpr, queryEvent, QueryEvent.class);
    ViewCriteriaManager vcm = getDestinDescViewObj().getViewCriteriaManager();
    ViewCriteria vc = vcm.getViewCriteria("DestinDescVOCriteria");
    getDestinDescViewObj().applyViewCriteria(vc);
    AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
    adfFacesContext.addPartialTarget(tblDestinDesc);
    However on each click of search the rows searched in the previous attempt are not retained.
    Can anyone let me know how to get the result from named criteria and append it the table?
    Thanks
    Ajay

    Can anyone help?

  • How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

    how can i do with labview program,when i have   20 different values,and 1 want to add it with constant value.and how to get the results?

    Why do the 20 values have to be different? The same code should work even if some are equal.
    What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
    What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get the results for given Bind Variable

    Hi
    Can any one help me how to get the result rows from the View Object after executing the view object query by setting bind variable?
    snippet as follows
    viewObject.setNamedWherClauseParams("name","hei");
    viewObject.executeQuery();
    How to get the results from viewObject is my question..?
    Thanks in advance

    Should be something like
    while (vo.hasNext()){
    Row r = vo.next();
    r.getAttribute....
    You might want to read the "most commonly used methods" appendix in the ADF Developer Guide.

  • HT4528 Iphone 4 stuck in recovery mode during upgrade to ios 7 software. How to get it unstuck without losing data. Thanks.

    I tried to upgrade my Iphone 4 software to ios 7.It then got stuck in recovery mode.  I tried to work with Itunes but screen said phone was in recovery mode and had to be fixed in order to use itunes.  I would like to know how to get in Unstuck without losing my current data, if at all possible. Thanks in advance for your help.

    If the phone is in recovery mode, the access to the data is already lost. See this support document to restore your phone. http://support.apple.com/kb/HT1808
    IF you did the update via iTunes, the first thing iTunes would have done was to create a backup. Check and if it did, then you can restore to that backup.
    Message was edited by: ChrisJ4203

  • How to get the results in one line

    Hi
    if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
    another question - is there a way that the script will not show the server name on every path?
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
    THC

    If you take you script and pipe it to get member, it will give you a list of various script properties.
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
    You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
    TypeName:
    Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
    Name MemberType Definition
    Equals Method bool Equals(System.Object obj)
    GetHashCode Method int GetHashCode()
    GetType Method type GetType()
    ToString Method string ToString()
    CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
    Timestamp Property datetime Timestamp {get;set;}
    Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
    You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
    This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
    and then give it various options. This is how you would pipe it (without any options).
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances |
    Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
    Get-Counter | format-table }
    Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
    get-help format-table
    I hope this helps!
    Thank for all the info...

  • How to get Test Results to SQL w/o Coldfusion

    Is there a way to get Captivate test results (or any results)
    to SQL. I was thinking of using the SCORM interface?
    A simple elegant solution would be great since I want to
    build it into to all my componants.
    Thanks in advance,
    Scott

    If your organization is running Sharpoint 3.x, you can use
    the sharepoint learning kit which runs off of a sql back end. This
    is a SCORM 2004 compliant LMS that can be found here:
    http://www.codeplex.com/SLK
    If you want to do this without an LMS, you can set up your
    quiz to just send the score as in this article:
    http://www.adobe.com/devnet/captivate/articles/store_cpresults_print.html
    You steal the idea from here, but in your javascript, you can
    do a pass your variables (quiz resutls), to an asp.net page that
    places them into a SQL db. I'm working on such a solution right
    now. That way, you don't need an LMS and you have complete control
    over how and when the results are stored.

Maybe you are looking for