How to get STP to play through my miglia harmony audio?
Hi,
Despite selecting both input and output as the harmony in STP preferences it wil only record through, and not output to, the miglia. The Miglia is a firewire audio in/out which works fine in and out with Live 5 and out with Reason 3. It's driving me nuts as I cannot properly audition fx to use in Live projects as they sound so different through the i-macs speakers.
Also does anyone know if the great fx that coe with STP can be used as audio unit fx in other programs i..e. Live or only with Apple programs? I also tried this but with no joy.
Thanks
After a little snooping around I remembered that the left and right audio tracks in FCP were initially not marked as a stereo pair, but mono a1 and a2. I did select them and check the "Stereo" option under the "Mark" menu.
I then checked the capture window settings and saw that it showed that audio would be captured as stereo. I'd expected to see it as capturing two mono tracks. I thought I had the solution. Maybe the capture settings changed when I checked a1 and a2 as "stereo."
Similar Messages
-
How to get sour to play through mini display via vga without sound cables?
I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.
Whovian wrote:
I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.
Can't be done dude -
How to get the form printed through the transaction ME42
hi,
How to get the form printed through the transaction ME42.
For example :
In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
when you save this, it will call the form.
Regards,
Ravi -
VISA: How to get the CSV file through C/C++ code?
How to get the CSV file through C/C++ code?
I'm communicating with a USB oscilloscope using VISA.Thank you for your reply.
I am using Apache Commons File Upload. Here is the code where I got the "fi".
DiskFileUpload fu = new DiskFileUpload();
fu.setSizeMax(1000000000);
List fileItems = fu.parseRequest(request);
Iterator itr = fileItems.iterator();
FileItem fi = (FileItem)itr.next();
if(!fi.isFormField())
File tempFileRef = new File(fi.getName());
System.out.println("Field = "+tempFileRef.getAbsolutePath());
} -
mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?
You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
Cannot Get Music To Play Through CD Player!
Hey guys, I am new to mac but have used iTunes for years. I know how to burn a cd off of itunes, even though I have never done so before, problem is I can't get it to play in my cd player! I have changed the format of the songs to mp3 but my cd player does not play mp3. My boyfriend has a mp3 player in his car and it worked, so I know itunes isn't totally screwing up. So what format do I need to have the songs in in order for it to play?? I have done it also through the default (AAC) and even WAV but when I put the cd in the player there is nothing there, just dead aire! PLEASE HELP
I have changed the format of the songs to mp3 but my cd player does not play mp3.
If your CD player will not play MP3 files, don't use MP3 files.
So what format do I need to have the songs in in order for it to play??
Select Audio CD for the format when you burn. -
How to get videos to play.
I get my videos onto the itunes library and try to put them onto my ipod but it will only play as music not as a video. How do i get videos to play?
Go to Videos.Video Settings...Make Sure "TV Out" is set to "OFF" on the IPOD:
iPod plays audio but not video of movies:
http://docs.info.apple.com/article.html?artnum=302828 -
Getting sound to play through computer during import/selecting to import
HI,
Complete newbie question as I've never done video before...
I plug the camera (Sony DCR- HC48) through Firewire into iMovie '08.
The camera is recognised, the import window opens and I can play the video, choose the bit I want and import it as a clip - cool! No problems there.
The problem is, when I am selecting the video to import the sound plays through the camera and not through the Mac. Ideally I'd like it to play sound through the Mac so I can use headphones while I select video to import. So my question is...
Is there no way to get the sound to play through the Mac as I am selecting the video to import?
Thanks for any help.
PatSo what would be the "standard" way of working? Would you import the whole DV tape onto the hard drive and then cut it down to size on there or bring in bits from the camera and use the camera's audio to select the chunks you want?
-
HT204368 How can I play music or get Pandora to play through my Jawbone earbud
How can I get my iPhone to play Pandora or saved music through my bluetooth earbud?
that what you're asking is why the original appletv the alu one don't support airplay when
the airport express do right?
guess it's a choice from apple maybe it required a software update as airplay was "invented" long after the last atv1g os update and rolling out an os update for a discontinued product as the
first appletv was osX and intel x86 based
and it's replacement atv2 is ios and Arm based -
How to get Formatted Mail Content through Java Application
I am using a mail sending function in my applet code which is listed below:
Main content is fetched from a format tool bar in JSP Page and it is passed as parameter to applet and it is used inside the mail content.
Same content when passed and executed in a JSP page, the formatted content is not lost and it is included in mail content as what it is fetched from Format Tool Bar.
Format is lost when it is used inside the Java Application mail sending function.
The below code I have used to send mail:
package com;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.mail.BodyPart;
import javax.mail.Message;
import javax.mail.Multipart;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
class mailsendClass
public void sendmail(String from,String host,boolean debug,String msgText)
try
Set tomailsid = new HashSet();
Set ccmailsid = new HashSet();
//to mail ids
tomailsid.add("[email protected]" );
tomailsid.add("[email protected]" );
tomailsid.add("[email protected]" );
//cc mail ids
ccmailsid.add("[email protected]" );
ccmailsid.add("[email protected]" );
String mailarray[]= (String[])tomailsid.toArray(new String[tomailsid.size()]);
String ccmailID[]= (String[])ccmailsid.toArray(new String[ccmailsid.size()]);
Properties props = new Properties();
//props.put("mail.smtp.port","425");
props.setProperty("mail.smtp.host", host);
if (debug) props.setProperty("mail.debug", ""+debug);
Session session = Session.getInstance(props, null);
session.setDebug(debug);
String mailsubject = "Mail Subject";
// create a message
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(from));
javax.mail.internet.InternetAddress[] toAddress=new javax.mail.internet.InternetAddress[mailarray.length];
for (int i=0;i<mailarray.length ;i++ )
toAddress=new javax.mail.internet.InternetAddress(mailarray[i]);
System.out.println ("id inside to address loop " + i + " is "+ mailarray[i]);
System.out.println ("toAddress " + i + " is "+ toAddress[i]);
msg.setRecipients(Message.RecipientType.TO, toAddress);
msg.setSubject(mailsubject);
try
javax.mail.internet.InternetAddress[] CCAddress=new javax.mail.internet.InternetAddress[ccmailID.length];
for (int i=0;i<ccmailID.length ;i++ )
CCAddress[i]=new javax.mail.internet.InternetAddress(ccmailID[i]);
System.out.println("CC Array is ===> " +CCAddress[i] );//
msg.setRecipients(Message.RecipientType.CC,CCAddress);
catch(Exception ss)
System.out.println("CC mail Exception is ====>"+ ss);
msg.setSentDate(new java.util.Date());
// Multipart multipart = new MimeMultipart("relative");
Multipart multipart = new MimeMultipart("alternative");
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setContent(msgText, "text/html");
// messageBodyPart.setContent(msgText, "text/plain");
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Transport.send( msg );
catch (Exception e)
System.out.println("The Exception is ------>"+e);
public class SendMail {
public static void main(String[] args)
System.out.println("before Mail Send ");
mailsendClass mail = new mailsendClass();
String from="[email protected]";
String host="172.16.2.6";
String msgText="<p><strong>Index</strong><br />I have posted the following PDFs (Second Pages) as mentioned to start producing the Index:<br /> Engage<br /> Chapters 16<br /><a title='ftp:///Index' href='ftp://index/'>ftp:///Index</a><strong><br />XML Coding - Files with errors</strong><br /> Engage<br /> Chapters 16<br /><a title='ftp:///XML_Coding_Need%20Fixing' href='ftp://xml_coding_need%20fixing/'>ftp:///XML_Coding_Need%20Fixing</a></p>";
mail.sendmail(from,host,true,msgText);
System.out.println("after Mail Send ");
Content placed in format tool bar is as follows:
Index
I have posted the following PDFs (Second Pages) as mentioned to start producing the Index:
Engage
Chapters 16
ftp:///Index
XML Coding - Files with errors
Engage
Chapters 16
ftp:///XML_Coding_Need%20Fixing
Content fetched from format tool bar inside JSP page is as follows:
<p><strong>Index</strong>
I have posted the following PDFs (Second Pages) as mentioned to start producing the Index:
• Engage
• Chapters 1–6
<a title="ftp:///Index" href="ftp://index/">ftp:///Index</a><strong>
XML Coding - Files with errors</strong>
• Engage
• Chapters 1–6
<a title="ftp:///XML_Coding_Need%20Fixing" href="ftp://xml_coding_need%20fixing/">ftp:///XML_Coding_Need%20Fixing</a></p>
Fetched Content inside Java Application through parameter and it will use as input for mail content is as follows:
<p><strong>Index</strong>
I have posted the following PDFs (Second Pages) as mentioned to start producing the Index:
Engage
Chapters 16
<a title="ftp:///Index" href="ftp://index/">ftp:///Index</a><strong>
XML Coding - Files with errors</strong>
Engage
Chapters 16
<a title="ftp:///XML_Coding_Need%20Fixing" href="ftp://xml_coding_need%20fixing/">ftp:///XML_Coding_Need%20Fixing</a></p>
Actual mail received after Java Application execution is as follows:
Index
I have posted the following PDFs (Second Pages) as mentioned to start producing the Index:
? Engage
? Chapters 1?6
ftp:///Index
XML Coding - Files with errors
? Engage
? Chapters 1?6
ftp:///XML_Coding_Need%20Fixing
Unicode characters in the mail content are replaced by ?.
In the function listed above I have used the MIME Setting as
Multipart multipart = new MimeMultipart("alternative");
I have tried by using relative MIME format also as
Multipart multipart = new MimeMultipart("relative");
But I am not getting the actual format passed as input to the Java Application in the mail content.
Can anybody let us know how to overcome this problem?
Thanks in advance.You need to really understand how the different multiparts work instead of just guessing.
But for your application, you don't need a multipart at all. Just use msg.setText(msgText, null, "html");
Although that doesn't explain your problem, it will simplify your program.
How are you determining that the mail received doesn't have the formatting? Are you viewing it in a
mail reader (e.g., Outlook)? Or are you fetching it with JavaMail?
Are you using an Exchange server? Exchange will often reformat your message to what it thinks you meant. -
How to get music to play continuosly on my 3gs ?
how do i play music continuosly on my iphone 3gs
after downloading some personal cd's, I seem to get same song repeatelyOpen itunes, connect iphone, click File>Devices>Transfer Purchases
-
Fluxbox, twinview and xscreensaver (how to get them to play together?)
On my Dell Latitude D830, I have xscreensaver going very smoothly, fluxbox rocks
and OMG, nvidia twinview is totally amazingly easy to set up.
Problem is when I have two screens going, xscreensaver only "saves" the
laptop screen.
Is there a way to get it to work on the other the twinview mounted screen too?Grey text when you look at the content and lock symbol at the bottom of the iTunes screen simply shows that your iPod is set to "automatically update songs and playlists". If you want to access your iPod directly, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage songs and Playlists" in the iPod preferences. Managing Your Songs Manually
One thing to remember about manually updating though is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away.Safely disconnect iPod
For info: iPod 101
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod. -
YouTube only plays the audio how to get it to play audio and video
I can't play youtube videos in firefox. I only get the audio portion without the video. It was working fine. No new programs. No new plugins. No changes I can recall. How do I fix this?
I'm on Windows XPYou can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*downgrade the Flash player to version 10.3 or 11.2
*http://kb.mozillazine.org/Flash#Troubleshooting -
How to get started with playing a video file using Java on JSF page ?
Hi ,
I am developing a JSF (Java Server Faces) page.
I need to develop following functionalities
1). play video file on web page
2). Let the user load video file into the system from a web page and that can stored in a database .
Please guide me on how to do the above or where to get started .
Thanks,hello brother
I am also doing work on it.....but don't reach at any result plz help me if you have something
[email protected]
Maybe you are looking for
-
Logic bounces won't open in Sound Studio
Properly speaking, this is a Sound Studio (2.0.7) problem, but as I've used it for many months (and would like to continue) for minor tweaking of bounced Logic AIFs, I'm hoping someone will have some idea as to what's going on here. Since I got my G4
-
I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?
-
Need help with custom column in BI Publisher
Hi Guru's I have started working with BI Publisher Recently and need with below issue Can you please let me know how can i create a custom column like % based on two existing measures in the report I tried creating it in obiee report and used that SQ
-
How to show catalog items with Approval Status:Pending in a Content Search Webpart
How to show catalog items with Approval Status:Pending in a Content Search Webpart using cross site publishing. Thanks in advance.
-
How to Get GPS to Start on Start up?
I would like to have the GPS service start on start up. I have a location service that only works when the GPS is on. However GPS only starts when I urn on a app that uses the service. I would like to have it turn on when I start my Razr.