How to get syntax errors in english rather than german
How to see the errors in english instead of german on the same page...any navigations for that....
thanks
Hi Balaji,
After you copy a Std SAP Program into ZPROGRAM,
In ABAP Editor see Goto -> Attributes.
System will throw a pop-up window, In which press change original language.
then you can be able to change to English.
Regards
Venkat.
Award Points, if helpful.
Message was edited by:
venkat Kumbham
Similar Messages
-
Getting syntax error in "SAPLBBP_PDH_CUF" in shopping cart/RFx/PO creation process in SRM7.0.Is it Patch issue?
Hi, something wrong with your customer fields...
Please, check them... -
How to get the Error message from hr_contact_rel_api.create_contact
Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Jsuser12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein -
How to check syntax errors in ABAP Queries
HI Guys,
How to check syntax errors in ABAP queries, Can please provide the T-Codes.
Advande thanks to everybody.
Thanks,
GourisankarHi
with these you can check syntax errors and performance points
Hi
these all are doing t he same thing that is checking the program for better performance
Tools for Performance Analysis
Run time analysis transaction SE30
SQL Trace transaction ST05
Extended Program Check (SLIN)
Code Inspector ( SCI)
Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Extended Program Check
This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
Code Inspector (SCI)
You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
reward if usefull -
please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen
Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.
-
I’m getting syntax error on a python instruction. it looks good but crashes. (print “Odd",num) becomes (print ‚Äúodd ‚Äú, num) 70 72 69 6E 74 20 E2 80 9C 6F 64 64 20 E2 80 9C 2C 20 6E 75 6D I’ve rebooted and changed keyboard
It worked when typed in from the command line. Doesn't when its pasted in from Text Edit, rtf or txt.
-
How to get an error icon with tool tip in a displaying table in a particu
How to get an error icon with tool tip in a displaying table in a particular field..
Thanks.Hi,
In the context create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya -
I updated my iphone 4s iOS 6 however my app store is now in german. I don't know how to get to back to english & now it won't update any of my purchases. Please help
I also had the same issue (I downloaded IOS6 on my Ipad in Germany, when I was travelling). I could not get into the Settings/ITunes & App Store and log out of my account as the Apple ID was greyed out and nothing happened when I clicked on my user id. I then had to go into iTunes and found that my user id at bottom of the screen in ITunes, click on my user id and assume that the german words meant to log out. I then was able to log back in and English was restored in the iTunes and App store.
-
When I view the music on my iPhone in iTunes, how do I view this by album, rather than in a long list of songs? When I view the music stored on my iMac, I get a choice to view by Songs, Artists, Albums, Composers, etc. But I don't get any choice with the music on my iPhone.
Its really hard to manage the music on my iPhone. I want to quickly remove albums and add new ones.
Is there a solution that I haven't seen?turboweaver wrote:
When I view the music on my iPhone in iTunes, how do I view this by album, rather than in a long list of songs? When I view the music stored on my iMac, I get a choice to view by Songs, Artists, Albums, Composers, etc. But I don't get any choice with the music on my iPhone.
Its really hard to manage the music on my iPhone. I want to quickly remove albums and add new ones.
Is there a solution that I haven't seen?
Create a playlist, add/delete albums and sync this playlist.
You don't need to manually manage the iPhone music to do this. -
How can I use "t3://becluster:6001" rather than "t3://dcsv02,dcsv01:6001"
I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic server
5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
I try to make a t3 connection between the PC and the cluster of machines.
On the Windows PC I have the following configuration for the
"c:\windows\system32\drivers\etc\Hosts" :
171.1.70.61 becluster
171.1.70.62 becluster
where
"171.1.70.61 is dcsv01 and
171.1.70.62 is dcsv02 "
If I connect my PC to the cluster with :
hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
I have a great failover mechanism : if any of the machine (dcsv01 or dcsv02) are
down the requests are routed to the other one.
BUT!! If I connect my PC to the cluster with :
hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
I have a not great failover mechanism :
say that my windows hosts file looks like :
171.1.70.61(dcsv01) becluster
171.1.70.62(dcsv02) becluster
then if dcsv02 is down then all requests are routed to dcsv01 and that is fine.
BUT!! if dcsv01 is down then I got on my PC the
"Bootstrap unable to get a t3 connection to dcsv01" exception and failover does
not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
So how can I use
"t3://beclsuter:6001" rather than
"t3://dcsv01, dcsv02:6001" with the same failover service????
Thanks
Thanks mike,
In a UNIX or windows environment how can I get a DNS server that round robin?
"Michael Reiche" <[email protected]> wrote:
>You need to have becluster defined in a DNS that round-robins.
>
>Mike
>
>"Martial" <[email protected]> wrote in message
>news:[email protected]...
>>
>> I have 2 machines in a cluster (dcsv01 and dcsv02) (HP UNIX with weblogic
>server
>> 5.1 sp8) and 1 Windows PC with weblogic 5.1 sp10.
>>
>> I try to make a t3 connection between the PC and the cluster of machines.
>>
>> On the Windows PC I have the following configuration for the
>> "c:\windows\system32\drivers\etc\Hosts" :
>> 171.1.70.61 becluster
>> 171.1.70.62 becluster
>> where
>> "171.1.70.61 is dcsv01 and
>> 171.1.70.62 is dcsv02 "
>>
>> If I connect my PC to the cluster with :
>> hp.put(Context.PROVIDER_URL, "t3://dcsv01, dcsv02:6001"); :
>> I have a great failover mechanism : if any of the machine (dcsv01 or
>dcsv02) are
>> down the requests are routed to the other one.
>>
>> BUT!! If I connect my PC to the cluster with :
>> hp.put(Context.PROVIDER_URL, "t3://becluster:6001"); :
>> I have a not great failover mechanism :
>> say that my windows hosts file looks like :
>> ..
>> 171.1.70.61(dcsv01) becluster
>> 171.1.70.62(dcsv02) becluster
>> ..
>> then if dcsv02 is down then all requests are routed to dcsv01 and that
>is
>fine.
>> BUT!! if dcsv01 is down then I got on my PC the
>> "Bootstrap unable to get a t3 connection to dcsv01" exception and failover
>does
>> not work. (not the way that it does with t3://dcsv01, dcsv02:6001 )
>> So how can I use
>> "t3://beclsuter:6001" rather than
>> "t3://dcsv01, dcsv02:6001" with the same failover service????
>>
>> Thanks
>>
>>
>>
>
>
-
How do you highlight multiple documents rapidly, rather than having to click on the document and on "command" one at a time? Right now, when I'm trying to highlight documents to export, I have to click on each document individually. Is there a way to highlight one document while scrolling down the list until all desired documents are highlighted? I would like to rapidly be able to do this to save time when I am exporting or saving multiple files from my documents to an external drive, CD-Rom or cloud storage.
Click on the first item
Hold the Shift key
Click on the Last Item.
All the items in between will be selected. -
I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?
Does this involve iPhoto in some way?
-
How to get my writening history/log more than thre...
How to get my writening history/log more than three months behind
download SkypeLogView
nirsoft.net/utils/skype_log_view.html
and open the main.db file with it
C:\Users\Tamim\AppData\Roaming\Skype\tamim\main.db
can you see the history?
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ -
How to find syntax errors in TestStand?
Hi,
I have about 70 sequences and I'm trying to find any syntax errors, which evaded my "error radar". How can I find these in TestStand without moving through every step (which would around 1000 and more steps!)? I'm missing something like the "syntax" check in LabVIEW, which indicates right in your face, if you brake the block diagram.
Thanks for any help.
Marc
CLD
Solved!
Go to Solution.Checking expressions at edit time to make sure that they will evaluate correctly at run time is a tricky process. For instance, what if you are dynamically creating an array at run time, and then iterating through that array. Unless you give that array good default values (which may be difficult if it is an array of custom types), your expressions will not be correct at edit time, and could be flagged as errors.
However, this is a request that we have heard quite a bit, and NI is investigating ways to allow customers to validate their expressions before running a sequence.
In the meantime, one of the TestStand developers created a tool that does what Doug was describing: iterates through every property object in a file and if it is an expression, tries to evaluate it. This tool is written as a sequence file in TestStand 4.1. Please note that since it uses recursion to iterate through each property object, and since recursion with sequences can be rather slow, the performance of this tool may be improved by duplicating its functionality with a code module (rather than sequence steps).
Message Edited by Josh W. on 03-30-2009 02:20 PM
Josh W.
Certified TestStand Architect
Formerly blue
Attachments:
CheckExpressions41.seq 13 KB
Maybe you are looking for
-
Diference in documents when copying to
I am copying from sales order to a Delivery and the amounts Totals Before Discount, Taxes are changed by a couple of cents. These only happens when doc currency is different from the local currency (for example using the system currency instead of t
-
Hi Friends, In my SAP system we are using number range for material is as 12 CHAR. so we have created all materials with 12 no char only. We are this system for the past 3 yrs. Now all of a sudden my system is not accepting 12 CHAR material numbers,
-
How to get latest instance using BO Enerprise SDK?
Post Author: sureshpolishetty CA Forum: .NET How to get the lastest instance of a report stored in crystal enterprise server (XIR2) using BO Enterprise sdk and .NET?. Can anybody help me with the query(using CI_INFOOBJECTS table)? Thanks
-
After I issued an UPDATE statement in isqlplus, I issued a SELECT statement (also in isqlplus) to confirm the changes has been made. But when I try connect to sqlplus and issued the same SELECT statement, I noticed that the changes did not updated. T
-
Default selection parameter in ME2M
Is it possible to default selection parameter in ME2M to " ALL" by setting in SU3 - Parameter with parameter ID " SEL" If yes,what is the parameter value to be enter? Thank you