How to get Tables for the datasource

Hi ,
When i have a datasource,How do i get to know..What are the table for that data source.
Thanks,
Kiran.

Hi,
In ECC:
1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Thanks
Reddy

Similar Messages

  • How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .

    Hi all,
    How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .
    I mean timestamp, date etc? And how I can check that
    Appreciate u r response.
    Thanks
    Pramod

    Hi,
    in your system, goto rsa1->tools->assign source system id....
    regards
    Siggi
    PS: I strongly recommend to use the search functionality. This has been asked already a few times.

  • How to find DB tables for the datasource

    Hi Experts,
    I have the requirement to check the DB tables which supplies data to datasource.Is there any provision has been given to check it at BW side.If not what is the provision provided at R/3 side.
    Kindly do the needful.
    Regards
    Kumar

    Hi,
    you can always check the queries wich are executed during a session by keeping your trace on. goto ST05, make the trace on for ur user name and then run the extraction. Goback to ST05 and switch the trace off. and in the log, ull see all the SQLs which are executed. In this you will get your table name as well..
    Dont forget to stop ur trace as its a overhead on the application server
    Sriram

  • How to get shorttext for the field

    Hi everyone,
    My question is
    The first column is auart(order type) from aufk(order master data)
    01     Internal Order (Controlling)
    02     Accrual Calculation Order (Controlling)
    03     Model Order (Controlling)
    04     CO Production Order
    When I am printing values of field auart, I am getting 01 printed for Internal order and 02  for Accrual Calculation Order and so on.
    How can I print the text Internal order .

    Hi venkata,
    I'm afraid you are talking about field AUFK-AUTYP (order category) (instead of AUFK-AUART).
    That's easy! Just access table DD07T for domname = 'AUFTYP' and ddlanguage = 'EN'. And domvalue_l = (order_category). Then you'll have the description into dd07t-ddtext.
    I hope it helps. Best regards,
    Alvaro

  • How to get updates for the ThinkCentre 58P shown below?

    I cannot seem to post pictures from a screen shot; so I have type it in below:
    From a programs called Driver Detective which if I want to have solve cost me $40!
    Your Driver Problems
    IDE ATA/ATAPI controllers (Out of date: 1)
       Standard AHCI 1.0 Serial ATA Controller
    System devices (Out of date: 4)
    (2) Intel(R)  4 Series Chipset PCI Express Root Port - 2E11
         Intel(R)  ICH10 Family SMBus Controller - 3A60
         Intel(R)  ICH10 Family SMBus Controller - 3A14
    Universal Serial Bus controllers (Out of date: 8)
    (8) Intel(R) ICH10 Family USB Enhanced Host Controller - 3A6A
    Here is my machine: MT-M.7483-XB4
    Serial number is: MJ02768
    I would like to have links so I can update the above:
    I have  installed: Lenovo Device Experience -  Updates and Drivers and Lenovo ThinkVantage Tools.  Nothing happens no finding of these items and you cannot pick on the Lenvovo support website in the search and drill down under machine type; you do not get these topics.   At least I cannot locate them.
    Any help would save me $40 and hopefully I can get it from Lenovo technical support!  I have done the result of the items from Intel tecnical support.  But I don't know what Intel consider this motherboard or I could do the rest of the items from Intel too.  There is a list of generic motherboards and I don't have a clue as to which one is the right one!
    Please help me!  Spend about 8 hours working on this list from 20 plus items now to only five left!
    Solved!
    Go to Solution.

    Forgot to mention that when I run System Update 5: if come up with Password Manger as the optional update only.
    When I go and do the Support  - Drivers & Download for Chipset it come up with this shown below:
                Chipset
    Intel Active Management Technology driver for Windows 7 (32-bit and 64-bit), Vista (32-bit and 64-bi...
    Not sure what that is I am updating?  Is it the Intel Management Engine Interface?
    Oh I skip a couple of item in the list too and one of them is shown below:
    Universal Serial Bus Controller
    Lost totally!  Help me please!

  • How to get password for the Sql server 2008 r2

    Always when a user forgets a  SA password , Blogs suggest to get into the server through windows Authentication having SysAdmin , and change the password for user SA.
    Sir,
    Is there any other methods to retrieve or see the password what we assigned before.
    Example: If SA Password is assigned as Test 
                   I have to get Test
    , Instead of changing password.
    Thanks in Advance.
     

    Hello,
    Dont you think it would create a Havoc if one could specifically see other admins password.Apply Gumption, you wont use SQL server if that feature is there.You cannot obtain password for other users.
    If user forgets it change it ,there is no restriction on changing.
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Problem while filling the Setup Table for the DS 2LIS_02_SCL.

    Hi All,
    When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
    u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
    I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
    Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
    Waiting for your valuable inputs.
    Thanks in Advance.

    Hi,
    When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
    In your case, the data souce is 2LIS_02_SCL for purchasing.
    when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
    2LIS_02_SCL
    2LIS_02_ITM
    Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
    you need to run the V3  jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
    go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
    once the delta queues gets 0 records by running V3 Jobs manullay.
    Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
    Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW)  *=Application number.
    Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
    once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
    Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
    I hope this may help yoou.
    Regards.
    Rambabu
    Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
    Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

  • How to get standard view or table for the standard inforsource

    Hi all:
          According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10,
    we need to know the standard view or table in order to corresponding DataSource?
    could you please tell me how to get  the standard view or table or DataSource?
    Couldn't thank you more!

    Hi Sony,
    Goto RSA1>BI content installation>goto objects>double click on the Infosource>then a pop-up comes search for that infosource-->select it and click on transfer
    Before that in the right side of the tab select the grouping as "Before and afterwards of the dataflow" and collection as automatic.
    then you get all the datasource/cubes and all the object related to the infosource.
    OR another option is-->
    Goto RSA6 in the R/3 and search for the datasource with the name "0CO_OM_CCA_10" (don't forget to expand all the tree structure in RSA6)
    then goto that datasource and double click on the datasource then you will get the Extract structure of that datasource.
    double click on the extract structure then you may get the View name also.
    hope this helps...
    Regards,
    Ravi Kanth

  • How to get value on the table control in infotyp e0008

    Dear Freinds
                I have written a user exit ZXPADU02 for my requirement
    as per the requirement in i have calculated  wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
    Nowe when do a Create or Copy for a rcord in  infotype 0008  iam not
    getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
    Please let me knlow
    regards

    Hi Syamala,
    The try to find the name of the table control and pass the values to it.
    Of course you have to loop and endloop, the table control and mofidy it from the work area.
    Message was edited by:
            Sera

  • Data gets deleted for the table RSTRFIELDSH

    If data gets deleted for the table RSTRFIELDSH at BW end
    ...what should i do?to get it back

    Wim,
    We lost the data from production. We ran Archive program to archive the data and archiving file is still exist.
    There is no possibliity to run the OUTBOUND process again to create the IDOCs.
    But only my concern is When we run the Transaction SARA we will be getting the data for other period as well.
    But I need to reload the data for three months only because that archiving file also has other period data as well.
    Can you send me details of how to use SARA Transaciton for particular period.
    Thanks,
    Kalikonda.

  • How to Read the internal table for the data download from the spool

    HI all,
    I have one issue regarding the spool ,we are getting the correct output as per requirement of  user but when we send the same to the user in pdf format they did notget the same.
    they are telling that the due date is missing from the pdf.
    Please advice me how to track the internal  table for the spool data converted intopdf in a readable format.
    the FM used for the above task is : 
    call function 'CONVERT_OTFSPOOLJOB_2_PDF'
    Please reply if any one worked on the same.
    Thanks in advance.
    Gaurav,

    Hi Wang,
    Please let me know how you solved your question.
    Points will be rewarded.
    Thanks,
    Arun.

  • Need to know the base tables for the QM datasources

    Hello SAP Experts,
    I want to know the base tables for the below mentioned datasources which stores the transaction data.
    1. 2LIS_05_QE1:  Inspection Characterstics Results
    2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
    3. 2LIS_05_QVUDN: Usage decision for Inspection
    Need your inputs.
    Thanks,
    Lasya.
    Edited by: lasya john on Dec 10, 2008 8:28 PM

    Hi Lasya,
    You can use help.sap.com for this.
    If you do not find this data source there...then
    You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
    Click on that ...and go inside it in the display mode.
    Here you can see a generic pool of fields on the left side which can be included in the data source........  field present in the data sources in the right side of the pool.
    For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
    So the field is being from that particular table.
    Even I would the same thing to reply to your thread.
    You can follow the same procedure to find the table for any LO data source.
    This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
    Hope it helps.
    Thanks
    Ajeet

  • I have an apple ID for the South African iTunes store how do I get one for the US store?, I have an apple ID for the South African iTunes store how do I get one for the US store?

    I have an apple ID for the South african i Tunes store.  How do I get one for the US one?  I want to use Mind Snacks.

    You will need a valid billing address in the US and be in the US when you want to buy anything from it. You can try requesting that it be added to the South African, but ultimately it's the app's developer that will have to grant Apple a licence to sell it there : http://www.apple.com/feedback/itunes.html

  • How do you get apps for the 1st generation iPod touch

    How do I get apps for the 1st generation iPod touch?

    By updating the iOS on the iPOd.  The 1G can go as high as 3.1.3.  That works with a lot of apps.  But some apps require a higher iOS and/or newer iPod.
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • HT4463 I attempted to purchase Civilizations V on my Macbook Pro, yet the application will not download.  How can I either get the download to complete or get refunded for the purchase?

    I attempted to purchase the app Civilization V for my Macbook Pro, but the app will not download.  How can I get the app to either finish the download or get refunded for the purchase?

    Yuk, what a horrible app. But if you insist...
    Mac App Store: How to resume interrupted downloads
              http://support.apple.com/kb/HT4485

Maybe you are looking for