How to get tax break up of TDS using SQL query ?
Hi all,
We are developing a TDS report using SQL query
Report will contain VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount,
Bill Value 100.000,
TDS (2%) - 2.000,
TDS Surcharge(10% on TDS) - 0.2,
TDS Cess(2%(TDS+TDS Surcharge)) - 0.044,
TDS HeCess(1%(TDS+TDS Surcharge)) - 0.022.
We have developed this report which displays upto
VendorCode,Date(ap inv date),Vendor name,
Bill value,TDS Amount.
How to show tax break up of TDS in SQL query ?
Thanks,
With regards,
Jeyakanthan.
Hi gauraw,
Thank for your reply.
I modified the query , pasted the query
as below in query generator,
Select T0.DocNum,T0.DocDate,T0.CardCode as 'Ledger',T1.TaxbleAmnt As 'Bill value',T1.WTAmnt as 'TDSAmt',(TDSAmt * 0.1) as 'TDS_Surch',
(((TDSAmt0.1) + TDSAmt)0.02) as 'TDSCess',
(((TDSAmt0.1) + TDSAmt)0.01) as 'TDSHCess'
FROM OPCH T0 INNER JOIN PCH5 T1 ON T0.DocEntry = T1.AbsEntry
WHERE (T0.DocDate >= '[%0]' and T0.DocDate <= '[%1]')
on clicking execute its showing error message invalid column
name 'TDSAmt'.
With regards,
Jeyakanthan
Similar Messages
-
How to get second maximum salary from employee table(sql query)
how to get second maximum salary from employee table(sql query)
dude there is no matter of structure .........that user already said its from employee table ...............its basic table in sql and there is no need to specify the table structure
.........i think u got my point I think you are the one who didn't understand Sarma's point.
Give a man a fish and you feed him once. Teach a man how to fish and you feed him a life long.
>
and the query is
select max(sal) from emp where sal<(select max(sal)
from emp);
this will give the 2nd max salary from the emp tableBtw: You solution is bad, because it needs to scan and sort the table emp twice. And a better solution has been given already.
Message was edited by:
Sven W. - reordered statements -
How to get resultset from procedure having dynamic select sql query ?
Hi,
I have created a procedure, in which there is dynamic select query. The procedure has one out put parameter which gives error code. When I compile that procedure it compiles successufully. When I run it it executes successfully and gives output error code. But I don't know how to get resultset of that dynamic select sql query. I need that.
This is the procedure:
create or replace
PROCEDURE uspGetProductDetailsMultiOrder
v_DefinitionDBName IN VARCHAR2,
v_CommonDBName IN VARCHAR2,
v_Filter_FilledStatus IN VARCHAR2,
v_Filter_Internal_Counterparty IN nvarchar2,
v_Filter_NoteType IN nvarchar2,
v_Filter_Exchange IN nvarchar2,
v_Filter_Issuer IN nvarchar2,
v_Filter_Product_Category IN VARCHAR2,
v_DateToFilter IN VARCHAR2,
v_Filter_FromDate IN VARCHAR2,
v_Filter_ToDate IN VARCHAR2,
v_Active_YN_Flag IN NVARCHAR2,
v_Entity_ID IN NVARCHAR2,
v_ErrorNumber OUT NUMBER
as
v_SelectSQL nvarchar2(32767);
v_Setting_Name nvarchar2(32767);
v_Default_Value nvarchar2(32767);
v_Config_Value nvarchar2(32767);
v_CCY_ID NUMBER(10,0);
v_CCY_Data nvarchar2(32767);
v_CCY_List nvarchar2(32767);
v_Seq_Id NUMBER(10,0);
SWV_Active_YN_Flag NVARCHAR2(1);
SWV_VarStr long;--varchar2(4000);
SWV_TRANCOUNT NUMBER(10,0);
SWV_fnc_SplitString_Id_var1 NUMBER(10,0);
SWV_fnc_SplitString_Id_var0 NUMBER(10,0);
CURSOR RestrictTermsheetVisibilityByC
IS select CS.Setting_Name,Default_Value,Config_Value
from Config_Settings CS LEFT OUTER JOIN Entity_Config EC ON EC.Setting_ID = CS.Setting_ID
where EC.Entity_ID = v_Entity_ID AND Setting_Level = 'ENTITY';
CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,','));
--CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id,Data FROM imp;
CURSOR GetRestrictTemplateListCursor
-- is select id,data from imp;
IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,',')) ;
--Parikshit 18-Jul-2010, active YN flag param added in SP
BEGIN
SWV_Active_YN_Flag := v_Active_YN_Flag;
if SWV_Active_YN_Flag = ' ' then
SWV_Active_YN_Flag := 'Y';
end if;
v_SelectSQL := ' ';
v_SelectSQL := v_SelectSQL || ' Select ';
v_SelectSQL := v_SelectSQL || ' NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency';
--SET @SelectSQL = @SelectSQL + ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost '
v_SelectSQL := v_SelectSQL || ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost ';
v_SelectSQL := v_SelectSQL || ' , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag ';
v_SelectSQL := v_SelectSQL || ' , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer';
v_SelectSQL := v_SelectSQL || ' , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount ';
--Added by Parikshit on 14-Jun-2011, to remove the unwinding amounts from the total issue size
--SET @SelectSQL = @SelectSQL + ' , NOP.LastTimeWhenProductModified,NOP.Nominal_Amount as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty '
v_SelectSQL := v_SelectSQL || ' , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ';
--********************************************************END
v_SelectSQL := v_SelectSQL || ' ,T2.Confirmed_Amount, T2.Confirmed_Shares';
v_SelectSQL := v_SelectSQL || ' , T3.Live_Deals';
v_SelectSQL := v_SelectSQL || ' , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL ';
v_SelectSQL := v_SelectSQL || ' , ( case When UPPER(NM.PreHedged_YN) = ''Y'' Then ''Launched'' ';
v_SelectSQL := v_SelectSQL || ' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then ''Matured''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL) Then ''Launched''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then ''Ready To Launch''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then ''Ready To Launch''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then ''Ready To Launch''';
--Warning trigger reached
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then ''Warning Trigger Reached''';
v_SelectSQL := v_SelectSQL || ' Else ''Not Ready'' ';
v_SelectSQL := v_SelectSQL || ' End)Launch_Status';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Code';
v_SelectSQL := v_SelectSQL || ' , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = ''Y'' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge';
v_SelectSQL := v_SelectSQL || ' , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class ';
v_SelectSQL := v_SelectSQL || ' , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '''' then N''Market'' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,''Atmaturity'') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,''N'') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC ';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, ''Product'' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate ';
v_SelectSQL := v_SelectSQL || ' from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName|| '.Note_Master NM ';
v_SelectSQL := v_SelectSQL || 'Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Master NI ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Order_Product NOP ';
v_SelectSQL := v_SelectSQL || ' On NOP.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_DefinitionDBName||'.AssetDef AD ';
v_SelectSQL := v_SelectSQL || ' On AD.Code = NM.Asset';
v_SelectSQL := v_SelectSQL || ' AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Parameter IP ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Template_Master TM ';
v_SelectSQL := v_SelectSQL || ' On TM.Template_Id = NM.Template_ID ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Scheme_Codes SC ';
v_SelectSQL := v_SelectSQL || ' On SC.Scheme_Alias = NM.Type';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Counterparty_Master CM ';
v_SelectSQL := v_SelectSQL || ' On CM.CM_ID = NM.Counterparty';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || ' ( ';
v_SelectSQL := v_SelectSQL || ' Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Deals ';
v_SelectSQL := v_SelectSQL || ' where Prematurity_Date IS NOT NULL';
v_SelectSQL := v_SelectSQL || ' AND (UPPER(Deletion_Reason ) = ''PART REDEMPTION'' or UPPER(Deletion_Reason ) = ''FULL REDEMPTION'')';
v_SelectSQL := v_SelectSQL || ' Group by Note_master_ID ';
v_SelectSQL := v_SelectSQL || ' ) ND ';
v_SelectSQL := v_SelectSQL || ' On ND.Note_Master_ID = NM.Note_Master_ID';
if (v_Filter_FilledStatus = ' ' OR UPPER(v_Filter_FilledStatus) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Filled_Status IN (' || v_Filter_FilledStatus || ')';
end if;
--AND NOP.Internal_Counterparty = 'DEFAULT''
if(SUBSTR(to_char(v_Filter_Internal_Counterparty),1,4000)= ' ') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Internal_Counterparty IN (' || v_Filter_Internal_Counterparty || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --Filter--'
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN ';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Order_RM ';
v_SelectSQL := v_SelectSQL || ' Where substr(UPPER(Order_Status_Flag),1,6) = ''YYYYYY'' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = ''N'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T2';
v_SelectSQL := v_SelectSQL || ' ON T2.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Deals ND ';
v_SelectSQL := v_SelectSQL || ' where ND.Active_YNFlag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T3';
v_SelectSQL := v_SelectSQL || ' ON T3.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' From';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''BUY'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Union';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''SELL'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) BS';
v_SelectSQL := v_SelectSQL || ' ON BS.NH_Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Where NM.Verify_YN_Flag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' AND NM.Active_YN_Flag = ''' || SWV_Active_YN_Flag || '''';
if(SUBSTR(to_char(v_Filter_NoteType),1,4000) = ' ' OR UPPER(v_Filter_NoteType) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Type IN (' || v_Filter_NoteType || ')';
end if;
IF UPPER(v_Entity_ID) <> 'ALL' then
OPEN RestrictTermsheetVisibilityByC;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
WHILE RestrictTermsheetVisibilityByC%FOUND LOOP
--2) Convert comma separated ccy (CNY,HKD,USD) string to single quote ccy with comma separated Ccy ('CNY','HKD','USD') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_CCY') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var0 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var0 > 0) then
--print 'Before Single quote separated ccy : ' + '''' + @Config_Value + ''''
v_Seq_Id := 0;
OPEN Get_RestrictCCY_List_Cursor;
FETCH Get_RestrictCCY_List_Cursor
INTO v_CCY_ID,v_CCY_Data;
WHILE Get_RestrictCCY_List_Cursor%FOUND LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH Get_RestrictCCY_List_Cursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE Get_RestrictCCY_List_Cursor;
--print 'After Single quote ccy : ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND nvl(NM.Denomination_Ccy,NM.Currency) NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
--3) Convert comma separated template (ELN,BELN,BELN_B) string to single quote template code with comma separated template ('ELN','BELN','BELN_B') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_SUBSCHEME') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var1 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var1 > 0) then
v_Seq_Id := 0;
OPEN GetRestrictTemplateListCursor;
FETCH GetRestrictTemplateListCursor
INTO v_CCY_ID,v_CCY_Data;
WHILE GetRestrictTemplateListCursor%FOUND
LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH GetRestrictTemplateListCursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE GetRestrictTemplateListCursor;
--print 'After Single quote template code: ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND TM.Template_Code NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
END LOOP;
CLOSE RestrictTermsheetVisibilityByC;
end if;
if (v_Filter_Exchange = ' ' OR UPPER(v_Filter_Exchange) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Exchange IN (' || v_Filter_Exchange || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --AND NM.Issuer = 4'
if (v_Filter_Issuer = ' ' OR UPPER(v_Filter_Issuer) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Issuer IN (' || v_Filter_Issuer || ')';
end if;
if v_Filter_Product_Category = ' ' then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND UPPER(NM.Note_Issuer_Type) IN (''' || v_Filter_Product_Category || ''')';
end if;
if UPPER(v_DateToFilter) = 'NA' then
v_SelectSQL := v_SelectSQL || ' ';
else
if UPPER(v_DateToFilter) = 'CLOSE_DATE' then
v_SelectSQL := v_SelectSQL || ' AND to_char( '|| v_DateToFilter || ') >= to_date(''' || v_Filter_ToDate || ''');
-- AND convert(smalldatetime,''' || v_Filter_ToDate || ''',106) ';
else
v_SelectSQL := v_SelectSQL || ' AND to_char(''' || v_DateToFilter || ''') BETWEEN to_date(''' || v_Filter_FromDate || ''') AND to_date(''' || v_Filter_ToDate || ''') ';
end if;
end if;
v_SelectSQL := v_SelectSQL || ' Order by NM.Product_Name';
SWV_VarStr := v_SelectSQL;
DBMS_OUTPUT.PUT_LINE(SWV_VarStr);
EXECUTE IMMEDIATE SWV_VarStr;
IF SQLCODE <> 0 then
GOTO ERROR_HANDLER;
end if;
IF SQL%rowcount > 0 then
COMMIT;
SWV_TRANCOUNT := SWV_TRANCOUNT -1;
end if; --Commit Transaction
v_ErrorNumber := SQLCODE;
RETURN;
<< ERROR_HANDLER >> v_ErrorNumber := SQLCODE;
ROLLBACK;
SWV_TRANCOUNT := 0; --Rollback Transaction
RETURN;
END;Please suggest something. Thanks
Edited by: BluShadow on 30-Nov-2011 11:00
added {noformat}{noformat} tags for formatting of code. Please read {message:id=9360002} to learn to do this yourself in future.Connecting to the database sample_adf_finiq_common.
Select NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = 'Y') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = 'Y') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ,T2.Confirmed_Amount, T2.Confirmed_Shares , T3.Live_Deals , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL , ( case When UPPER(NM.PreHedged_YN) = 'Y' Then 'Launched' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then 'Matured' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL) Then 'Launched' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then 'Warning Trigger Reached' Else 'Not Ready' End)Launch_Status , NI.Issuer_Code , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = 'Y' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '' then N'Market' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,'Atmaturity') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,'N') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, 'Product' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate from Sample_ADF_finiq_Common.Note_Master NM Left Outer Join Sample_ADF_finiq_Common.Issuer_Master NI On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Note_Order_Product NOP On NOP.Note_Master_ID = NM.Note_Master_ID Left Outer Join Sample_ADF_finiq_Common.AssetDef AD On AD.Code = NM.Asset AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) Left Outer Join Sample_ADF_finiq_Common.Issuer_Parameter IP On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Template_Master TM On TM.Template_Id = NM.Template_ID Left Outer Join Sample_ADF_finiq_Common.Scheme_Codes SC On SC.Scheme_Alias = NM.Type Left Outer Join Sample_ADF_finiq_Common.Counterparty_Master CM On CM.CM_ID = NM.Counterparty Left Outer Join ( Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from Sample_ADF_finiq_Common.Note_Deals where Prematurity_Date IS NOT NULL AND (UPPER(Deletion_Reason ) = 'PART REDEMPTION' or UPPER(Deletion_Reason ) = 'FULL REDEMPTION') Group by Note_master_ID ) ND On ND.Note_Master_ID = NM.Note_Master_ID AND NOP.Internal_Counterparty IN (1) LEFT OUTER JOIN ( select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares from Sample_ADF_finiq_Common.Note_Order_RM Where substr(UPPER(Order_Status_Flag),1,6) = 'YYYYYY' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = 'N' group by Note_Master_ID ) T2 ON T2.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals from Sample_ADF_finiq_Common.Note_Deals ND where ND.Active_YNFlag = 'Y' group by Note_Master_ID ) T3 ON T3.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( SELECT NH_Note_Master_ID, (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged, (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding, SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY, SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL, SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY, SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL From ( SELECT NH_Note_Master_ID, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'BUY' GROUP BY NH_Note_Master_ID Union SELECT NH_Note_Master_ID, 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL, 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'SELL' GROUP BY NH_Note_Master_ID ) GROUP BY NH_Note_Master_ID ) BS ON BS.NH_Note_Master_ID = NM.Note_Master_ID Where NM.Verify_YN_Flag = 'Y' AND NM.Active_YN_Flag = 'Y' AND UPPER(NM.Note_Issuer_Type) IN ('Internal') AND to_char('16-oct-11') BETWEEN to_date('15-oct-11') AND to_date('17-oct-11') Order by NM.Product_Name
V_ERRORNUMBER = 0
Process exited.
Disconnecting from the database sample_adf_finiq_common.
here v_errornumber=0 is the output when i run it in oracle sql developer. -
How to get thr number of rows of an SQL query in JSTL
hi guys,
can anyone please tell me how do i perform a function which finds out the particular rownumber of an sql query in JSTL.....
the same code in jsp is:
<% plateRSet.getRowNum() %>
how do i do this given plateRset is the var for a given iteration
thanks
rahulmake your result set scrollable...Not such a good idea. With Oracle, the JDBC driver will read and cache all the ResultSet in memory (with other DBMSs/drivers the behavior will probably be different, but you will still have some unnecessary overhead).
You can do the caching yourself if you think it's worth it. If the piece of code you posted is why you need this for, then use a List or Vector and you won't need to know the size upfront.
Alin,
The jTDS Project. -
How to pull Roles and Policies from backend using SQL query in OIA
Hello,
I have Roles and Policies defined in OIA with mapping each other and there is no direct extract report from OIA Web console.
Is there any oracle SQL query by which we can get the data and filter the Policies based on the role ?
Note: We have one Role having more than one Polcies defined in OIA.
Appreciate your help.
ThanksI am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta -
Get maximum value in a field using SQL query
Hi,
I want to retrieve the row containing the maximum value for a particular field.
select max(fieldname) from tablename
How do I do this using database connectivity toolkit.
ShivaHello,
I figured out the answer. It was sql syntax.
Thanks for coming in here to help.
I created another post earlier because I had a little different question that pertained to fetch.vi. How do you get an array out from fetch.vi without creating error. I also made type an array also but it does not allow an array.
Thanks for your help.
By the way, how do I as the original poster get rid of a whole thread I created, especially if its a duplicate. -
How to insert date into ms access database using sql query in servlet
sir all thing is working well now only tell me how we can insert date into ms access database which is input by user .
insert into db2(bookname,studentname,date) values('"+bname+"','"+sname+"',date_format)";{code}
or either the system date is inserted with query .
plz help me
thanxbhavishya wrote:
sir all thing is working well now only tell me how we can insert date into ms access database which is input by user .
insert into db2(bookname,studentname,date) values('"+bname+"','"+sname+"',date_format)";{code}
or either the system date is inserted with query .
plz help me
thanxAnd that SQL statement is another reason to use PreparedStatement. I assume bname and sname are input from some form? Well, if that's the case, simply inserting them into SQL by simple String concatenation is just begging for all sorts of problems. What if there is an apostrophe in the entry? Broken Statement. Worse, it's a wide open invitation to an SQL Injection attack. -
How to delete entire data from MDS UI using SQL query or Using SSIS
Hi All,
Using SSIS i loaded data in MDS UI(Subcription view),I want when i execute my package next time and load data in MDS it should be blank or data should not be in UI.Hi
please checked following url to insert data in your MDM
http://msdn.microsoft.com/en-us/library/jj819772.aspx -
How to display last 10 minutes data only using sql query
Hi,
Presently, I'm using version is,
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
So, please consider SCOTT Schema to resolve my issue,
I want to display only last 10 minutes what records are inserted or updated or deleted.
Please provide in many ways!!
ThankQ!!Hi,
See below:
select
from
emp
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
7934 MILLER CLERK 7782 23-JAN-82 1300 10
14 rows selected
select
from
emp
minus
select
from
emp
as of timestamp (systimestamp - interval '10' minute)
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
0 rows selected
update
emp
set
ename = ename || ' x'
where
empno = 7934
--1 rows updated.
select
from
emp
minus
select
from
emp
as of timestamp (systimestamp - interval '10' minute)
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7934 MILLER x CLERK 7782 23-JAN-82 1300 10
*/For changes, deletes and inserts compair the two result (emp and emp as of timestamp (systimestamp - interval '10' minute) ) with each other.
Regards,
Peter -
How to get this output using sql query?
Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi passHi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan -
How to get Header in Downloaded .xls file using GUI_Download function
How to get Header in Downloaded .xls file using GUI_Download function ???
How to use the the Header parameter available in GUI_Download function .HI,
see this sample code..
data : Begin of t_header occurs 0,
name(30) type c,
end of t_header.
data : Begin of itab occurs 0,
fld1 type char10,
fld2 type char10,
fld3 type char10,
end of itab.
DATA: v_pass_path TYPE string.
append itab.
itab-fld1 = 'Hi'.
itab-fld2 = 'hello'.
itab-fld3 = 'welcome'.
append itab.
append itab.
append itab.
append itab.
append itab.
t_header-name = 'Field1'.
append t_header.
t_header-name = 'Field2'.
append t_header.
t_header-name = 'Field3'.
append t_header.
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
default_extension = 'XLS'
IMPORTING
fullpath = v_pass_path.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_pass_path
filetype = 'DBF'
TABLES
data_tab = itab
FIELDNAMES = t_header
Cheers,
jose. -
How to get field separator in flat file using GUI_DOWNLOAD function
hi,
how to get field separator in flat file using GUI_DOWNLOAD function.
thanking you.Hi,
Use WRITE_FIELD_SEPARATOR = 'X'.
Check this sample code
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
price LIKE sflight-price,
currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
carrid(10) TYPE c,
connid(10) TYPE c,
fldate(10) TYPE c,
price(10) TYPE c,
curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
TABLE OF
fs_head.
DATA:
t_flight LIKE
TABLE OF
fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
connid
fldate
price
currency
FROM sflight
INTO TABLE t_flight
WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = 'D:\flight.xls'
FILETYPE = 'ASC'
* APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* IMPORTING
* FILELENGTH =
tables
data_tab = t_head
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'D:\flight.xls'
filetype = 'ASC'
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = t_flight
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc EQ 0.
MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
hi i am face with problem that is i want to show the how much approximate space required for backup or .bak file to get backup using sql query because i want to show the required memory for backup file on my java application
Hi FIROZ
TENNALI
Is this still an issue, or can we close the thread?
* closing a thread by marking the answer/s (there is a link beneath each response) and you can vote for useful responses as well (there is a link to vote on the left of each response)
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
How 2 get the path of a file Using jsp
how 2 get the path of a file Using jsp
i have tried getPath...but i'm geting the error
The method getPath(String) is undefined for the type HttpServletRequest
any idea how 2 get the path of a fileYou need ServletContext#getRealPath().
API documentation: http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String) -
After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from. Please help
I'm assuming you mean you don't have your camera application (which is not saved on any backup anyway).
One way to find it is to get to your home screen, swipe the screen from right to left, and type "Camera" in the search field. Camera is a core Apple app and cannot be deleted, so it must be there somewhere.
An alternate approach is to do Settings > General > Reset > Reset Home Screen Layout
Maybe you are looking for
-
Hi I am facing a problem in BDC ,call trasaction, for FB01 While the recording is done, the confi has BSEG-DMBTR field (Local Currecny) and now its not there is the screen. If i run my BDC is foreground, it says Field does not exist as sucess message
-
Umlaut characters getting distorted while displaying in Web dynpro java
Hi All, I have a scenario where I am reading some string values from a properties file placed in java DC. The values read from properties file are to be displayed in Web Dynpro application. The string values contain some umlaut characters eg (ü,ä).
-
What if "ALTER DATABASE OPEN" WORKS WHEN DB IS INCONSISTENT???
Hello Everyone, I heard from couple of friends that in the case of recovery , oracle database opens despite the fact that some of the data files are inconsistent. Is this really true? If it is, then i think its a bug with specific Oracle patch or rel
-
Dear Experts, My issue is ,,, My client done STO process completely ,but in delivery (vl02n) he picked 1st line item partially and the system selected NLN item category Again he picked remaining quantity in next line for same line item and the syste
-
ChatandVision VERY slow order delivery - awful cus...
I placed an order on 28th October 2013 and due to previous good service just waited and expected it to arrive promptly. At the end of November I wondered where the order was and followed up by ringing the Australian number on their website - spoke to