How to get the Admin Task to Process Members from Member Sheet?

Hey guys!
I've been successful getting the Custom SSIS Admin Task to process a Dimension using a SQL staging table. However, we have a few dimensions that are best managed in the Excel Member sheets. When we have changes to these member sheets, is it possible to process the dimension using the SSIS Admin Task. If so, how do I go about doing this? What settings do I need to use within the task?
I've tried using the "Scheduled Members Process" option (I honestly don't even know what this option does and I've found no documentation), but when this option is selected the task simply fails without any messages. And I've tried putting the path directly to the Member Spreadsheet in the "SQL Source Table" box. Using this method, the package returns a successful status code, but it's not really processing anyway. It finishes in less than 2 seconds.
Thanks much!
Sean

I don't understand why you want to do this -- if you're maintaining some dimensions manually in the XLS member sheet, then you should process the changes manually too, using the Admin Console. No DTS is required, and you also get the benefits of validation & error messages right away.
Having said that, if you feel it's necessary, you could set up a DTS package which uses the XLS member sheet, via an Excel connection manager, as a data source which is loaded into your custom dimension staging table. Then this staging table is the source of the admin dimension processing task.
Beware, though, that this means every time you add or modify dimension properties, you will need to update the columns in both the Excel connection manager and the staging table. I've always found this to be a very frustratingly manual process in BI Dev Studio, to get the data fields to properly refresh. I usually end up deleting the source & destination data flow objects, just to get the new fields to show up. (Maybe there's a better way, but I haven't found it.)
I always consider the dimension-processing decision on automation to be all or nothing for each dimension. If you're maintaining the dimension manually in the member sheet, use the admin console to process it.

Similar Messages

SSIS Pkg to Process Members from Member Sheet

BPC 5
Is there a way to process dimensions with Data Manager which mimics the Process members from member sheet option available in the Admin console? I have tried the provided Admin_Makedim package but it will not run without supplying a table name. According to the documentation, I thought that if a table wasn't provided, it would use the member sheet. However, I think the documentation is outdated.
I realize that I can create tasks to clear the mbr table and then load the data to there as I am doing that with some dimensions where I get flat files from BI. However, there are other dimensions where we want our users to maintain in Excel outside of BPC. I simply want to replace the membersheets in the adminapp directory and then process those dimensions.
Thanks,
--Brent

Ok, I guess I will do that like I have done with our other dimensions. Unfortunately, that means creating connection managers and mapping the fields for 17 more dimensions. It is suprising that there isn't a task for processing a dimension from a member sheet when that is the way it is done with the admin tool.
Thanks,
--Brent

How to get the form reference in .js page from .jsp page

hi
i have written one form in jsp page omething like:-
<html:form action="/shopping" onsubmit="return false;">
can anybody tell me,how to get the form reference in .js page from .jsp page ,
i have tried:-
var formRef = document.forms[0];
butits not working.
Thanks.

Its very simple......y cant u prefer google...Bad
c this example...
function submit()
alert("textbox"+ document.forms[0].name.value);//to get textbox value in js
document.forms[0].submit();//to submit jsp page using js
<html:html>
<html:form action="/shopping" onsubmit="submit()">
<html:text property=name>
learn to search in google..
</html:form>
</html:html>

How to get the absolute path of a file from the local disk given the file n

how to get the absolute path of a file from the local disk given the file name

// will look for the file at the current working directory
// this is wherever you start the Java application (cound be C: and your
// application is located in C:/myapp, but the working dir is C:/
File file = new File("README.txt");
if (file != null && file.exists())
String absolutePath = file.getAbsolutePath();

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to get the field row name of database from a form?

Hello experts,
I am newer in OIM and developments with the API's.
I have this environment,
one resource that have the attribute department
relationship with the database row
UD_RESOURCE1_DEPARTMENT and other resource with the same attribute in, UD_RESOURCE2_DEPARTMENT
I am programing one java class that put values in the
form field through the table name, sample,
UD_RESOURCE_DEPARTMENT.
I let some code:
# Hash table with the value of Department
myMap.put("UD_RESOURCE_DEPARTMENT", value);
# and save in the resource form
tcFormInstanceOperationsIntf tcform = (tcFormInstanceOperationsIntf)tcUtilityFactory.getUtility(dataProvider,"Thor.API.Operations.tcFormInstanceOperationsIntf");
tcform.setProcessFormData(Long.parseLong(formKey), myMap);
But this solution implies know the name of the field in the database and not is a global solution.
I am interesting in know how I can obtain the name of the
row field of the database for the atribute. Does anybody know how to obtain the row field name of database from an IT Resource or through the field name of the form?
Is this the correct way to store data in a form?
Thanks in advanced.

Hi,
Thank you.
I have seen this function in the OTN help, but how can i get the index number. My requirment is when saving the data, I need to save both the value and the element name into the database,
Also it is tabular block, more than one rows
Thanks again

How to get the planned quantity of past month from md61

Hi all,
I couldnt get the planned quantity of past month from the tcode md61.It shows only the current and future month's demand.I want to know the planned quantity of past month's.
I have checked PBIM,PBED,PBHI tables,here also I am facing the same problem.
Is it possible to get past month quantity from md61? If No how to know the quantity planned for past month?...Please tel your ideas..
Thanks in Advance!!!
Edited by: Ranganayahi Chandirasekaran on Jul 30, 2008 8:17 AM

Hi,
You can check History of PIR through MD62 itself.
Select particular row, Goto Menu, Select Item History(Shift +F6).
Or
You may pls execute transaction MD73.
Plz select option "3 :History Planned ind reqmnts " in the display options and execute the report.
Regards,
R.Brahmankar

How to get the response of a vbscript ran from extended js?

Hi All,
I want to get the result from a vbscript, how to get that in my jsx? This is what I'm doing-
vbscript (this will return me something, i've added just a sample string)
Wscript.Echo "Like this?"
jsx
var a = File("C:\\Users\\Sahil\\AppData\\Roaming\\CreativeWorx\\1.vbs");
var b=a.execute();
Now, variable b returns me true/false; and the output i.e. "Like this?" is alerted! So my question is-
1. How to get the output in a variable?
2. How to avoid the alert
So, I simply wish to get the output from my vbscript and then perform certain functions accordingly, alos, I dont want this to be alerted!
Any help will be highly appreciated!

The capitalization is app.doScript and not app.doscript that is if you are trying to get a jsx script to run and access a string from from a vbs script.
When defining the VBscript for multiline scripts the easiest method is to use triple quotes
VBscript = """dim WMI: set WMI = GetObject("winmgmts:\\.\root\cimv2")
dim Nads: set Nads = WMI.ExecQuery("Select * from Win32_NetworkAdapter where physicaladapter=true")
dim nad
for each Nad in Nads
if not isnull(Nad.MACAddress) then Wscript.Echo Nad.description, Nad.MACAddress
next"""
when using the scriptArgs you can either make a loop of them and send the string value of each one something like this
For (n = 0 .........
myArg = "myArg" & n
myStringToPassOver = "Shaddow Fax " & n
app.scriptArgs.SetValue myArg, myStringToPassOver
Next
or probably better to make a long comma or something else separated string and pass it over after the loop
var VBScript = """myArg = ""
For n = 0 To 15
myArg = myArg & "Shaddow Fax " & n & ","
Next
app.scriptArgs.SetValue "myResult", myArg
app.doScript(VBScript, ScriptLanguage.visualBasic);
var myResult = app.scriptArgs.getValue("myResult").replace(/\,$/,"").split(",");
// if neaded use "replace" to remove final "," and "split" to convert into an array
alert(myResult.join("\r")); // alert the array
The above script is a jsx script that runs a vbs
If you want a vbs script to run and access a string from from a jsx script then you would use xxx.DoScript see the sample from the manual below.
Set myInDesign = CreateObject("InDesign.Application")
myJavaScript = "alert(""First argument: "" + arguments[0] + ""\rSecond argument: "" +
arguments[1]);"
myInDesign.DoScript myJavaScript, idScriptLanguage.idJavascript, Array("Hello from
DoScript", "Your message here.")
myVBScript = "msgbox arguments(1), vbOKOnly, ""First argument: "" & arguments(0)"
myInDesign.DoScript myVBScript, idScriptLanguage.idVisualBasic, Array("Hello from
DoScript", "Your message here.")
P.s.Please mark the question as answered, thanks

How to get the URL parameter value when navigating from JSP Page to portal

Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi M

Hi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar

How to get the list of all process order which are settled?

Hello Friends,
Is there any standard report available to get the list of all settled Process Order or Production order?
Thanking all of you in advance.
Regards,
Jitendra

Hi,
You can the below standardreports for knowing the list of Settled Process Orders :
1. Use Tcode : COOIS and in the selection fields provide the Process Order Type, Plant and System Status As " SETT" and execute the same . System will list all the Process Orders which were settled so far.
2. Use Tcode : CO26 with selection fields as above.
Hope this will suffice your reqt.
Regards
radhak mk

How to get the admin username & password for JMX connection

Hi All,
I need to retrieve the username & password and pass it to the JNDI to get the JMX connection for MBean Server. I will be doing this locally.
Is there an API that I can use to retrieve this information ?
thanks
-sheshi

Forgot to mention, I am using WebLogic 9.1

How to get the Full and final settelment date from PC_payresults

Hi Experts..sairam.
We are preparing Functional specification for a report on Full and final settelement.
We need to extract the full and final settelement date from payresults.
Full and final settelement would be an offcycle run.
How can we identify the particular Offcycle is meant for full and final settelment.
Full and final settelement can be done after date of relieving.
Please share your ideas to get the field names and logic to fetch.
Thanks in advance.
Regards,
Sairam.

Hi Praveen,
I found it from HRPY_RGDIR through SE11.
But im in confusion in thinking on Logic to find the Full and final settelment processed date.
First of all..Report has to check WPBP table weather Employment status is Zero.
Later..It has to read the HRPY_RGDIR table.
Here what the system to check.What conditions to be validated to fetch the Full and final settelment processed date.Will it be FPPER and INPER as 00000000 or shall we do it from offcycle reason.
Please share your ideas.Thanks in advance.
Regards,Sairam.

How to get the real name of a user from WFSYST-AGENT

Hi,
I am retrieving the WFSYST-AGENT value (which correspond to the US<user_id> of the agent responsible of a task) in a container variable in my workflow.
I would like to get the real name of the user represented by WFSYST-AGENT. How should I do that ?
Thanks in advance for your help.
Thibault

Hi,
Take the user name and write a select for database table USER_ADDR fetching fields NAME_FIRST and NAME_LAST by passing BNAME = username.
Regards,
Jayesh

How to Get the Current data into Planning Layout from the Planning cube

Hi,
I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
Like
data
Tran           cal month            org               amt
1                 jan                        a                  100
1                 feb                        a                   200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran           cal month            org               amt
1                 feb                        a                   200
Kindly help me in this regard
Thanks
Naveen

Naveen,
    Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini

How to get the number of issued active certifcates from a CA

Hi,
We have a PKI infrastructure still running on Windows Server 2003. How can I get the number of active certificates issued? I have used the filter option on the issued certifcates node listing the certificates with expiry date after the current
date, but this list only all the certs without the actual total number of certs.
Any help is appreciated
Thanks
Johan Marais
JkM6228

On Wed, 22 Jan 2014 08:57:59 +0000, Martin Rublik wrote:
certutil -config -view -out "Issued Distinguished Name" -restrict "Certificate Expiration Date > 22. 1. 2013" | findstr Rows
It will dump CA database look for issued distinguished name (name in the subject of the certificate) and outputs only certificates expiring after 22.1.2013. The output is piped to findstr command that filters the total number of rows.
There are a couple of problems with the above:
1. Not every certificate will have a Subject name.
2. This won't filter out certificates that have been revoked but are still
time valid.
3. I couldn't get the "findstr Rows" to return anything and when I look at
the help for findstr I don't see that as an option for the command.
This command worked for me, make sure you enter it all on a single line:
certutil -view -restrict "Disposition=20,NotBefore<January 22 2013" -out
SerialNumber | findstr /C:"Serial Number:" | findstr /r /n "^" | find /c :"
Also, if you copy and paste from this post into the cmd window, be careful
that the quotes and dashes don't get converted into the wrong type.
Paul Adare - FIM CM MVP
"for thing in $(fnord $(frob $(./gazonk foo bar baz bletch thud grunt)));
do
zot --wodchuck ${thing}; done"
-- Stig Sandbeck Mathisen making a point about the beauty of shell scripts

How to get the Admin Task to Process Members from Member Sheet?

Similar Messages

Maybe you are looking for