How to get the Ap credit memo list?
Dear Experts,
Could you tell me how to get the AP credit memo list?
Is it standard report ?
Thanks!
Xinling
Hi,
Go to transaction code FB03 and do following steps :
1. Click on
2. Click on
3. Next Screen
Double Click on Transaction Code if it is not Green
4. Next Screen
Enter the transaction code through which you are generating Credit Memo or click on Multiple Selections in case you are using more than one.
5. Execute
Regards,
Tejas
Similar Messages
-
How to get the latest credit limit values per each customer in the report.
Hi All,
Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR Customer Doct number Credit managment view
100 200 10001 200
100 200 10002 200
100 300 10004 300
100 300 10005 300
100 400 10006 400
100 400 10007 400
100 400 10008 400
Master data tabel (P Table)(Credit managment view)
Credit managment view Credit limits
200 1000.00
300 50000.00
400 90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
Now create a formula or CKF and use zcredit.
This should display the credit limit in your report as normal key figure.
I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
Hope this helps. -
How to get the variants for LAV LIST or GRID?
Hi,
How to get the variants which are stored in table like JVSO1, using function module REUSE_ALV_VARIANT_F4 ?
Thanks.Hi,
Delcare
DATA : st_variant TYPE disvariant, "Work area for variant
st_variant1 TYPE disvariant. "Work area for variant
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-041.
PARAMETERS : p_varnt TYPE disvariant-variant MODIF ID md8. "Variant
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varnt.
*--Local Variables
DATA: l_exit(1) TYPE c. "ALV exit
*--Call the function module to display the list of Variants
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = st_variant
i_save = c_save
IMPORTING
e_exit = l_exit
es_variant = st_variant1
EXCEPTIONS
not_found = 1
program_error = 2.
*--Check Subrc
IF sy-subrc <> 2 AND l_exit IS INITIAL.
p_varnt = st_variant1-variant.
ENDIF.
start-of-selection.
IF NOT p_varnt IS INITIAL.
CLEAR st_variant1.
MOVE st_variant TO st_variant1.
MOVE p_varnt TO st_variant1-variant.
*--Call the function module to check the variant exist
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = c_save
CHANGING
cs_variant = st_variant1.
st_variant = st_variant1.
ENDIF.
DATA : lv_repid TYPE sy-repid.
*--Pass the Report name
lv_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = it_fcat
is_variant = st_variant
it_events = it_events
i_save = 'A'
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = it_zsd_ra
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e368(00) WITH 'Alv Display failed'(044) .
ENDIF.
regards,
Prashant -
ECC6.0 t-code COOIS - how to get the "Profile" select-option list
Hi PP Gurus
We are implementing ECC6.0
We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
My question is regarding standard transaction COOIS.
I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
There are only the following items (select-option screen of COOIS in ECC6.0):
-LIST
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
-LIST
-PROFILE
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
Questions:
1. Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
2. Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
What I have already explored:
u2022 ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
u2022 I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022 I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022 I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
THANK YOU.Hi,
The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
The navigation profile is adjacent to the icon called Environment (its a drop down list).
Revert if you face any issues.
Regards,
Vivek -
How to get the value from select list to text box
Hi,
I have a select list i want to retrieve the value from select list to text box.
How can i do that???
Regards,
Sakthi.Hi Sakthi,
Yo can use the Java script for that..
Dynamically the value will come into text box.
Use the below script.
<script type="text/javascript">
function disFormItems()
var lReturn = $v(here your select list name)
alert(lReturn);
document.getElementById(here your text box name).value =lReturn; }
</script>Cheers,
Shan -
How to get the funds credit with the cancellation of the update for old acc
i just cancelled my old email and mac.com account. Now here is the question. How can I get the funds refunded back into my checking account when the upgrade made to the old account is now interrupted due to the fact that my previous mac.com is invalidated due to the new mac.com account that has been created and with the current update included?
This forum is for discussing issues related to the Mail & Address Book applications included with Mac OS X 10.4 (Tiger). Yours appears to be a .Mac issue that has nothing to do with Mac OS X’s Mail. If that’s the case, the right forum for such questions would be one of the .Mac Forums, such as .Mac General, for example.
-
How to get the Table Level Constraints List
hi all,
i created a table as follows,
create table temp(fld1 number, fld2 number, fld3 varchar2(10),
constraint fld1_pk primary key (fld1),
constraint fld2_uk unique (fld2) );
table has created successfully.
now i need to get list of constraints (constraint_names) in to Java.
i checked user_tab_columns table and in that i got only nullable.
how to get this one, with query;
regards
pavanYes!
SQL> select constraint_name, generated from user_constraints
2 where table_name = 'EMP'
3 /
CONSTRAINT_NAME GENERATED
SYS_C003996 GENERATED NAME
SYS_C003997 GENERATED NAME
EMP_PRIMARY_KEY USER NAME
EMP_SELF_KEY USER NAME
EMP_FOREIGN_KEY USER NAME
5 rows selected.
SQL>Cheers
Sarma.
Message was edited by:
Radhakrishna Sarma -
[JFileChooser] How to get the local network servers list?
Hi, i try to use a JFileChooser (and its FIleSystemView) to retreive the list of local network computer.
In the UI, i can see it but i don't manage to get that list outside of the jfilechooser.
When I do : new File(\\\\Server\\Directory).list() I have a good answer.
But hen I do new File(\\\\).list() to have the server list, i have nothing. I don't manage to list the workgroup too.
Thanks a lot.This question is asked and answered repeatedly. Search the forum.
-
How to get the material list displayed in CU50 transaction into ABAP report
How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
But I want only the material list displayed in CU50.Hi,
Could you please tell us how you found a solution to your problem?
Thanks & regards
Hassan -
How to get the latest creditlimits in the reporting
Hi All,
Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR Customer Doct number Credit managment view
100 200 10001 200
100 200 10002 200
100 300 10004 300
100 300 10005 300
100 400 10006 400
100 400 10007 400
100 400 10008 400
Master data tabel (P Table)(Credit managment view)
Credit managment view Credit limits
200 1000.00
300 50000.00
400 90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .
Edited by: sirisha Nekkanti on Oct 30, 2008 6:27 PM
Edited by: sirisha Nekkanti on Oct 30, 2008 6:35 PMThis is duplicate of
how to get the latest credit limit values per each customer in the report.
thread. -
To view all Customer Credit Memo list
Hi,
Friends... I want to see All the customer Credit memo list,
kindly Replay me
Thanks
Madhuhi
try with the following tables of CMR
KNVI Customer Master Tax Indicator
KNVK Customer Master Contact Partner
KNVL Customer Master Licenses
KNVP Customer Master Partner Functions
KNVS Customer Master Shipping Data
KNVT Customer Master Record Texts for Sales
KNVV Customer Master Sales Data
KNA1 General Data in Customer Master
KNAS Customer master (VAT registration numbers general section)
KNAT Customer Master Record (Tax Groupings)
KNB1 Customer Master (Company Code)
KNB4 Customer Payment History
KNB5 Customer master (dunning data)
KNBK Customer Master (Bank Details)
KNBW Customer master record (withholding tax types) X
KNC1 Customer master (transaction figures)
KNC3 Customer master (special G/L transaction figures)
KNEX Customer Master: Legal Control - Sanctioned Party List
KNKA Customer master credit management: Central data
KNKK Customer master credit management: Control area data -
How to get the list of materials from Sap r/3
Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khannaHi Khanna,
<i> 1. Should we create DT MT MI and all (OR) not</i>
Yes U need to create for HTTP site...for RFC U need to import..
<i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
You create your own structres for Request and respoce.. and Map it with RFC..
<i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar. -
How to get the number of my songs, videos listed?
How can I get the numbers of my songs, and videos, and podcasts listed in the "About" section (Settings> General> About>)
I get the number of applications listed for apps and photos, but despite having videos, podcasts, and songs on my iPad they are not indicated as 0!
I have iPad1 with 32GB, but get only 29GB as capacity listed in the "About" section. This basically means the iPad OS is using 3GB of space, wow is this correct!I don't know of any settings.
You can try a reset: Press and hold the Home and Power buttons for 10 seconds until the Apple appears. Then allow the ipad to restart and then recheck the count of files.
Not sure why the ipad takes up differing amounts of memory. See if it changes with the reset. I don't think it will, but I don't know for sure. -
How to get the list of users who has access for list of tcodes.
How to get the list of users who has access for list of tcodes.
Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned. -
How to get the list of active devices in current wifi network?
Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks
Maybe you are looking for
-
Cannot print Landscape report to PCL printer - Solved
Has anyone been able to print a landscape BIP PDF to a PCL printer? I am on EBS 11.5.10.2, with BIP 5.6.3, and PASTA 3.0.4. The first report template I tried creating (Discrete Job Pick List Report) in XML Publisher / BIP happens to have a landscape
-
Embed WMV video in PDF on Mac platform?
Acrobat 8's Help documentation states that the video formats one can embed in a PDF depends on the operating system and the video formats its player supports. I have plugins installed which allow my Mac's Quicktime Pro player to play and encode WMV f
-
Captured 16:9 appears 2.35:1 though??
I am simply looking for some consistency in my work flow. For some reason I am getting my SD footage to be fine and full screen 16:9 SD on my HDTV but on other projects and in the viewer/canvas...it appears 2.35:1 (meaning the screen is not only 16:9
-
Calling javascript function at tableview
Hi all, I have a tableview on my screen( not using iterator). I want to call a clientSide event on clicking on a particular cell of the table..I need something like onClientClick for buttons, for my tableview cells. How can this be done ? Please sugg
-
IDVD error message "buffer inderrun"
I am trying to burn a quicktime h264 movie in iDVD but keep getting the error message "The recording device reported the illegal request:Buffer underrun. (0x21, 0x02.)" What does this mean... and what can I do.