How to get the apple ID from the original owner?

i were given the iphone from second-hand, but i can not contact the original owner to have them remove this device from their account. because i reset this device i using iOs 7. please help me, how can i use this iphone?

Sorry, you can't. You now own a useless device, except if you want to use it as a paperweight. Apple can't/won't help you, and without the original Apple ID, there is no way to activate the phone.

Similar Messages

How to get the original version of Web report in BW ?

Hello Friends ,
I have transported one Web report from BW development to BW Production System.
But unfortunately , the desired result not me met .
So I have been asked to keep the original version of the Web report.
As the new version of Web report has replaced the previous one ,
So could anybody tell me how to get the original version of Web report in BW ?
Many thanks in advance !!!!!!!!

Hi,
You can use the Transaction STMS choose the option "Import Overview" . In the GOTO tab select "History" and choose "Import History".
Here you can find the history of requests imported to the prod system.
Regards,
K.Manikandan.

I just purchased a secondhand iPad in carboot and I didn't realised that the old account is still linked to the device now can't activate my accnt.i don't know where and how to contact the original owner.what should I do?is there any other option?

I just purchased a second hand iPad in carboot.i didn't realised that the old accnt is still linked to the device,now I icant activate my account .I don't know where and how to contact the original owner.what should I do activate my accnt?is there any other option?

Apple cannot help you locate the original owner. If you have no way to contact him/her, and you purchased directly from the seller rather than through a site that offers buyer protection, then the iPad is useless to you and you have wasted your money. The iPad is quite probably stolen and you should turn it in to the police.
This is why it's very risky and usually unwise to purchase out of a car boot from someone you don't know.
Regards.

How to get the original query string in an event receiver when dialogs are enabled

I have scenario where I am adding a document to a document library which has an external data column on it. My goal for this column is to have it automatically populated with an appropriate value based on original query string to the page. The general
idea is that I am on a custom page that has various webparts on it including a view of my document library that is context sensative based on the query string, and I want to use that context sensitivity not just to filter the list but also when adding documents.
I have been searching around for solutions to this problem all day and have gotten this far:
I have an event receiver attached to my document library that handles the ItemAdded event syncronously (as such I have the new list item available to me). In that event receiver I am able to set the column values as required. Where I am stuck is on getting
the value from the query string that I need to actually set as the column value.
Based on:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/8cfcb299-9a55-4139-86ec-0b53b2922a54 and several similar articles/posts I have been able to get the original source Url with the query string I want via the following
code in my event receiver:
private HttpContext context;
public EventReceiver1()
context = HttpContext.Current;
public override void ItemAdded(SPItemEventProperties properties)
var originalQueryString = context.Request.QueryString["Source"];
// Parse the query string and use the value ...
The problem is that this solution breaks down if the dialogs are turned on under the advanced settings for the list. The reason the solution fails is because the "Source" query string parameter goes away and is replaced by "IsDlg" set to a value of "1".
Does anyone know how to get past this hurdle? Any help would be greatly appreciated.

Hi Stuart,
The reason I'm looking for "Source" in the query string is because that is something I found to be reliable when the Dialogs are turned off. I've dug around pretty deep in the Request object to see if anything had the data I was looking for and unfortunately
it doesn't appear to be there. The
context.Request.QUeryString.ToString()
returns a rather simple one of:
List=%7b43ECDCB0-8440-4652-B067-AA20481779D7%7d&RootFolder=&IsDlg=1
and the
context.Request.UrlReferrer.Query.ToString()
has the same value.
I suspect this is due to the dual step process that takes place in adding an item to a document library where the first modal popup (which I suspect likely has the information I need) gives you the opportunity to browse to your file and then the second
dialog (maybe this is getting brought up as a result of another request which is now referring back to the original request that brought up the first dialog?) where you edit your properties.
Thanks for the try though, if you've got anything else I'd love to hear it.

How to get the database owner name in T-SQL script

Hello, All!
I want to get the database ower name (in format DOMAIN\user) by through T-SQL script. But SELECT * FROM sys.databases returns only owner_sid.
Please show me a way - how to get the owner name, if you have only owner_sid. Or, may be, somebody know another way ?
Andy Mishechkin

SELECT suser_sname( owner_sid ), * FROM sys.databases
http://www.t-sql.ru

HT201441 I bought my iPad second hand from a swap meet and i can not activate it and i do not know how to contact the original owner.

I have tried to Restore it but it is not woking.

Check back with the people that were running the swap meet, or the person that you purchased from. If you cannot make contact with the original owner, you will not be able to activate the device. It will be useless to you.

How to find the original owner of an iphone

i recieved an iphone 5.. and its locked and reported stolen..so i need to find the original owner of the device to remove the report to know if im gonna unlock or not..so is there is a way to find his number through the imei njmber or something like that..help please

Try this: ask your dad, and have your dad ask the person from whom he purchased it.

How to get the original file name in chinese with upload component?

It is inconvenience for user to upload file with name only in english. When upload a file with chinese file name, the file name gotten from "fileUpload1.getUploadedFile().getOriginalName()" is just like "缃戠粶鍥�.jpg". Do somebody have a good idea?

I spoke to the component engineers regarding this issue
First please check if the s page encoding is set correctly, as browsers tend to default to use the encoding that was used for the page when submitting the request.
(Because of how the JSF response writer is written, multibyte characters can be written correctly even if the encoding is not set correctly so the fact that form correctly rendered chinese characters is not proof that the encoding was set correctly).
If you established that the page encoding is correct, then there is a
bug in the FileUpload. The method that gets the name is a straight
shot through to an Apache FileUpload library method. Technically this
ought to be resolved by that method checking the request body
character set before parsing the parameters.
- Winston
http://blogs.sun.com/roller/page/winston?catname=Creator

How to get the original record Number in Multi-Record Block

Hello Everyone,
I know how to find the duplicate item in the multi-Record block,
For Ex:
Line_Num            Item_Name             Quantity
1                           AA                      10
2                           BB                      20
3                           AA Here 3rd record Item_name is duplicated, I can able to check and display the message that 'Item is duplicated' ,I found from [sheikyerbouti.developpez.com/duplicates/duplicates.htm] .
but I want to show along with original line number i.e 1 when the item_name is entered .
Here I want to check the original Line_Num and want to display the message
'Item is duplicated,Update quantity in Original Line 1'
Can anyone help me to get this?
Thank You.
Regards,
Guru.

Hi Francois,
Actually I want to check and show the message when the item_name is entered i.e WHEN-VALIDATE-ITEM TRIGGER.
I put the following code in WHEN-VALIDATE-ITEM TRIGGER
Declare
     curnum number;
     dupnum number;
     cur_item varchar2(100);
     v_alert_no number;
     p_linerec varchar2(100);
Begin
curnum := TO_NUMBER(:System.Trigger_Record);
cur_item := :Lines.Item_number;
First_Record;
p_linerec := :Lines.Item_number;
LOOP
If p_linerec = cur_item then
     dupnum := :Lines.Line_num;
     set_alert_property('ALERT_STOP',ALERT_MESSAGE_TEXT,
'Duplicate Item Found,Update QTY in Original line number '||dupnum);
   V_ALERT_NO := show_alert('ALERT_STOP');
   :LINES.ITEM_NUMBER := NULL;
:LINES.ITEM_DESCRIPTION:= NULL;
:LINES.ITEM_REVISION:= NULL;
:LINES.ITEM_CATEGORY:= NULL;
elsIF (:System.Last_Record = 'TRUE') THEN
     Go_Record(curnum);
     EXIT;
ELSE
     Next_Record;
END IF;
END LOOP;
End; But I am getting the following error,
FRM-40737:Illegal Restricted Procedure
FIRST_RECORD in WHEN-VALIDATE-TRIGGERand then
its showing for first line itself.
Duplicate Item found.Update QTY in Original line number 1so I put the condition
If :Lines.Line_num > 1 then --Only to check when the block having more than one record.but now it checking from second record and displaying,
Duplicate Item found.Update QTY in Original line number 2 --(instead of Update QTY in Original line number 1)Can you tell me how can I change the above code for my requirement?
Thank you.
Edited by: Gurujothi on 27 Mar, 2013 5:20 PM

IPhone: How to get the original photo image with Picker

Hi!
I'm trying to pick and send (via HTTP) the original image taken by the camera, the 1,600 x 1,2000 image that's available in iPhoto after syncing.
As far as I gathered, the UIImage doesn't help me here, since it's scaled down to 640x480, probably to safe memory. But one should supposedly be able to access the underlying CIImage.
Here's what I'm doing right now:
I'm setting up an ImagePickerController in my
- (void)viewDidLoad
imagePickerController = [[UIImagePickerController alloc] init];
imagePickerController.delegate = self;
imagePickerController.sourceType = UIImagePickerControllerSourceTypeSavedPhotosAlbum;
[self refreshView:self];
and process the picked image with
- (void)imagePickerController:(UIImagePickerController )picker didFinishPickingImage:(UIImage )image editingInfo:(NSDictionary )editingInfo
CGImageRef imgRef = image.CGImage;
CGFloat owidth = CGImageGetWidth(imgRef);
CGFloat oheight = CGImageGetHeight(imgRef);
NSLog(@"Original size = %f %f",owidth,oheight);
NSData imageData = [NSData dataWithData: UIImagePNGRepresentation(image)];//(image, 1.0)
However, I still get the following output:
2008-07-25 11:44:58.543 myApplication[1564:20b] Original size = 640.000000 480.000000
Obviously still scaled down - but there must be a way to access the original.
What am I doing wrong?

Yes, I'm trying on the iPhone, as the camera is unavailable on the simulator.
Here is the code I'm using:
// In my main code, to initialise the picker
UIImagePickerController *picker;
// Check if camera is available
if ( ![UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera] )
UIAlertView *alertView = [[UIAlertView alloc]
initWithTitle:@"Can't access camera" message:@"The camera is unavailable!" delegate:nil cancelButtonTitle:nil otherButtonTitles:@"OK", nil ];
[alertView show];
[alertView release];
return;
picker = [[UIImagePickerController alloc] init];
picker.sourceType = UIImagePickerControllerSourceTypeCamera;
picker.delegate = self;
[_myView addSubview:picker.view];
[_myView performSelectorOnMainThread:@selector(setNeedsDisplay) withObject:nil waitUntilDone:NO];
// The delegate methods
- (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingImage:(UIImage *)image editingInfo:(NSDictionary *)editingInfo
NSLog( @"Image dimensions: %fx%f", image.size.width, image.size.height );
// Remove the picker interface and release the picker object.
[picker.view removeFromSuperview];
[picker release];
- (void)imagePickerControllerDidCancel:(UIImagePickerController *)picker
// Remove the picker interface and release the picker object.
[picker.view removeFromSuperview];
[picker release];
}

How to get the original look of firefox 4 with 'firefox button' on top then bookmarks lane following with address bar..?

i have been using firefox 3.6.16 and just upgraded to version 4 last night. actually the problem is this, in my browser the 'firefox button' and all tabes are shown in the same lane on top.
what i want is to get the default look of firefox 4 with firefox button on top and all the tabs appearing on beneath this button..(not in same lane)
am i having due to any preference setting or else? please help

If the Firefox window is maximized, it will display the tabs in the same line as the Firefox button, it only displays them on a separate line on a non-maximized window.

I purchased a second hand iPad mini and it's on activation lock because I don't know how to contact the original owner please help me

Please help me

You will not be able to activate the iPad without the Apple ID and Password of previous owner.

So how can I get the original cd for my iMac

How can reset my imac

Your question is how to get the original OS X DVD for your system? In the US, contact Apple support at (800) APL-CARE (800-275-2273) They have them for a nominal fee. Of course, if you bought a system delivered with OS X 10.7 Lion, there are no OS X DVD's as everything is handled online.
When you say you want to reset your iMac, you want to wipe the disk clean and reinstall the operating system and iLife? or ?

How do you transfer Apple IDs from one ipad to another iPad? I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

how do you transfer Apple IDs from one ipad to another iPad? I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

You don't transfer Apple ID's from one device to another one. You sign out in the settings, )the App Store and iTunes if necessary) and then sign in with the other ID.
Settings>iTunes & App Stores>Apple ID>Sign out. Them sign in with the other ID. You can sign out of the app store and iTunes as well by going to the featured Atab in the App Store and the music tab in iTunes, swipe to the bottom and access the Apple ID in there.
You should have erased the iOad before you gave it to her in Settings>General>Reset>Erase all content and settings. That way she could set up the iPad as new with her own Apple ID.
Be aware of the fact that if you use each others ID's in order to download past purchased content to your own iPads, you will lock yourself out of your own ID as you will have associated your iPad with the other person's Apple ID.
In other words, if you sign into your wife's ID on your iPad so that you can download an app or an album so that you don't have to pay for it again, you will lock yourself out of your Apple ID for 90 days.

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How to get the apple ID from the original owner?

Similar Messages

Maybe you are looking for