How to get the best possible performance when accessing remote files
Hello,
I have recently set up a VPN to allow remote access to an MYOB data file hosted on my Mac Mini at home (MYOB is an accountancy software package for Mac and PC).
My Mac Mini is connected to the internet over a standard ADSL home broadband line, with a terrible upload speed. I think my ISP (BT) quotes 512k upload and up to 8 Meg download. Needless to say, access to the data file is sluggish at best.
Can anybody recommend a better way to host the data file?
I am aware of lots of 'free file hosting' services, a quick Google search brings up loads, but I need to actually open and run the file from its remote location. I cannot download and then upload again because we have multiple user access, and need to ensure the file on the server is not being edited by two people at once.
Thanks for your help...
Thanks for both of your answers.
*Amazon S3 Option*
I preferred the Amazon S-3 option for ease of use and setup, but this does not appear to work. The software accesses the file very quickly indeed, which is great, but I think due to the connection protocol the network volume reports 'zero' disk space remaining.
The MYOB application does not like this, so pops up an error message saying it needs at least '200kb of disk space to open'. This is because, upon opening, it writes a couple of 'lock' files to the disk where the data file is stored.
My previous solution with the Mac Mini used VPN to connect, thus allowing SMB shares for windows users and AFP shares for Mac, and when mounted these network volumes would report the remaining disk space of the Mac Mini itself. MYOB liked this.
Is there any way I can get the network share to report something other than zero disk space remaining?
*Dedicated Server Option*
Otherwise, the VPS option sounds very affordable. I am however unfamiliar with the world of dedicated servers and the Ubuntu OS, but surprised they are so affordable. I would rather go this route than change my home ISP.
Firstly I have never used Linux or typed anything into the command line. So, will I be able to use VNC to access the VPS?
Second, to access the data file, should I continue to use VPN? My current VPN server software supports Linux, so can I use this on Ubuntu?
Thanks again..
Similar Messages
-
System Overload & How to get the best G4 Performance
Okay all you Logic and OSX Gurus. I need your help. I've finally made the LOGIC leap from OS9 and have hit the SYSTEM OVERLOAD wall like many of you before me.
I've been pouring over this, and many other Forums and Blogs, for about two weeks now, and have tried many of the fixes / solutions to no avail. I estimate I'm now getting about 25% of my OS9 Logic performance from Logic in OSX.
One specific case in point is this. A four minute song sketch. No tempo changes. Four midi tracks, 6 Audio instruments and 2 EFX (1 Guitar Amp Pro, 1 Space Designer that's no even being used).
I have unsuccessfully tried to Bounce this to disc for two weeks now. The AUDIO and DISK I/O Meters barely register until the GUITAR AMP PRO track brings the AUDIO METER up to about 1/3rd usage. At various points in the Bounce the G4 will completely FREEZE, and I will have manually restart.
THINGS I HAVE TRIED, and continue to try are:
- Repairing Permissions
- Trashing Preferences
- Updating MOTU Drivers
- Changing Processor performance setting - which I cannot do BTW, because my system does not seem to support this option.
- Closing all Widgets
- Freeing up more Space on my Mac OSx startup disk (I now have 78.41 Gig available on a 114.49 Gig drive)
- Run Cocktail to clean up System logs and temporary files
- FREEZING TRACKS as a temporary 'fix'. This did nothing BTW but add more strain to the CPU and I still had about 1/3rd the usage with my GUITAR AMP Plugin (and it still crashed).
- Increased AUDIO BUFFER to 1024
So, (and I guess this is really two sides of the same question)...
1) How do I FIX this SYSTEM OVERLOAD problem, and
2) How do I "optimize" my Dual 1.25 G4 in order to get the best performance possible out of LOGIC PRO?
OTHER QUESTIONS I HAVE ARE:
- Does the G4 have the processing power needed to run LOGIC PRO?
- I'm confident adding RAM will "help" (can't hurt), but am I really dealing with a RAM Problem here or, again, can these processors really handle it?
BTW - I'm not looking for an excuse to go shopping for a Quad G5 (I mean who needs an excuse... . But, I'm really trying to determine if at the end of the day I will spend money on RAM, Hard Drives, whatever..., and then still be frustrated and end up shopping.
- Are SCSI drives a problem with Tiger / Logic? These Cheetah drives are fast (10,000 RPM), reliable, and have been great drives to record on. I'm trying to do this simple bounce to one of the Cheetahs and as I said it's just not happening.
- Does the startup volume size effect performance?
- Does the amount of free space on the start up drive effect performance?
- Firewire 400 vs 800? My sample library is on the Firewire drive, and I'm thinking this does not pull a lot on the CPU as these get loaded into memory before playing? Am I right about that? It is Firewire 400.
A long letter and a lot of questions. I thank you all in advance for any answers, guidance or direction you can give. Please also let me know if there is something I HAVEN'T asked, looked at or should be doing.
Best,
Kevin
Kevin Saunders Hayes
SYSTEM SPECS
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.4.8f2
Logic 7.1.1 (885)
Pro Application Support 3.1
MOTU 896 - Latest drivers
2 - Seagate Cheetah 9 gig SCSI drives
1 - Oxford Firewire (Up to 400 Mb/sec) with EXS Library
G4 Duel 1.25 Mac OS X (10.4.3)And after months of using Express, and a week of
using Logic, I hadn't had a system overload until
today. Now I'm having them all the time. It wasn't a
set up change, it wasn't running on the battery, it
wasn't running software monitoring, it's set up with
512 i/o buffer, medium processor buffer. And it
wasn't brought on by number of tracks - that's for
sure. After it started happenind and I took a break &
came back, I was sitting on my couch, Powerbook in
my lap, tapping a beat in with the onscreen
keyboard.... a SINGLE instrument, mind you. NO plugs,
no other tracks of ANY kind. And it happened.
There's a lot of great, relevant and very helpful info on this forum and it all helps and it all counts. But..... so many people are suffering this when moving up to Pro 7 from either Pro 6 or Express. One expects a change in system load when a major update comes along but more and more people are reporting that simply recording 1 or 2 tracks of audio, pure, no plug-ins or EQ is causing an overload whereas in the previous version(s) this was easily accomodated. This, you may have guessed, has happened to me as well. Are we to accept in 1 version increment (albeit a major one) there is such a massive increase in demand from hardware that you cannot record a pure no-plug-in stereo track? When going back to 6.4.3 it will happily record 8 at once, let you EQ and reverb and then do another 8 AND then another. With no troble at all.
It is pointing more and more towards fundamental flaws in the programming. Did L7 come out too soon? Are we just beta testing what is pro software? We are only on 7.1.1 and 6 went to 6.4.3 but at no stage was it this bad at the fundamentals of what the App is for. I love Logic, I really do, but I think, even with all the great help we are fighting what Apple should be addressing. Not that you can find/contact/talk to or get any sort of response from them.
I have tried but have gone back to 6.4.3 until 7.1.2 or even 7.2 appears, but I'm not paying for 7.2. My £200 upgrade from 6.4.3 is now sitting on a shelf desperately wanting to use it. -
How to get the complete path name when uploading a file from servlet
Hi,
I write a servlet to upload a file from html page
<intput type=file name=fileupload>I am using
import org.apache.commons.fileupload.to upload file. i want to get the all fields in the form and file name and content of the file also.
It give the file name only
String filename= fileItem.getName();
o/p krish.jpgBut i want complete path naem like
d:/krishna/images/funny/krish.jpgI serach the API org.apache.commons.fileupload.*
But i did nt find the method to get it.
plz help me , which api or method to use here..Krishna_Rao_chintu wrote:
But i need path and have to do some calculations on it.No, you don't. If you have requirements which say you do then the requirements are wrong. You couldn't do anything useful with the path on the client system even if you could get it.
is there any alternatives in java
I need path and have to calculate MD5, Presumably you need to calculate MD5 on the contents of the file and not on the name of the file.
and convert the file to binary format.... etc oprations on itSorry, "convert a file to binary format" is basically meaningless.
but we can get the content of the file using
byte [] get()/ getString() methods
If i get content is there any performance degrades?
ie if the content is lengthy is it take more time?Take more time than what? Degrading performance from what? It's certainly true that it would be quicker to not upload the file, but that's a pointless comparison. If you have some other process to compare with, let us know what it would be. -
How to get the filename in mapping when using sender File adapter?
hi Experts,
I have scenario where XI reads the input file using Sender file adapter.
The file name is configured in the communication channel.
In my message mapping it is possible to read this file name?
Thanks
gopalHi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha -
Getting the user name who has accessed a file available in Shared Location
Hi All,
Can anyone tell me how to get the user name who has accessed a file which is available in a shared location in java?
Thanks in advance
Regards
Senthil Kumar.SYou can't do it in pure Java.
-
Getting the best possible DVD encodes out of Compressor
Is there a decent guide somewhere about how best to set Compressor DVD encode projects up? I take it using the standard two-pass encode settings probably isn't ideal and some tweaks would possible yield better results.
I just read this on another site - Can somebody explain what this is all about?
+The program I used is a Windows software encoder that costs a lot less money than you'd think. I manually operated it (that is, told it which frame was to be an I frame, a P frame, or on rarer occasions, a B frame) by hand rather than letting it assign automatically.+
+Tweaking the GOP structure like this is essential for getting the most out of it, and beyond a certain point actually has more of an effect on the picture quality than bit-rate.+Is there a decent guide somewhere about how best to set Compressor DVD encode projects up? I
take it using the standard two-pass encode settings probably isn't ideal and some tweaks would
possible yield better results.
If you're serious about this, you should also invest in a book dedicated to video encoding. Just look on amazon.com for the latest editions byt the tow or three main authors, search for "encoding" and "video encoding."
The process of getting the best possible image out of MPEG2 is tedious, more like accounting than moviemaking. The best software allows you to carefully preview the results, compare them, and is likely to be supported by a realtime encoding card. And that means it's a very expensive PC application.
At NAB2008 a new product was announced for Compressor that was supposed to provide near real time professional grade MPEG2 encoding. Cant' recall the name. It was about $3k IIRC.
bogiesan -
How to get the full image directory when i upload the image to web page???
hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html -
How to get the trial version of adobe access whether can protect content
i submit info in
https://www.adobe.com/cfusion/mmform/index.cfm?name=flash_access_trial_cert
but nobody contact me..
How to get the trial version of adobe access?
ThanksHello,
Apologies for that! Currently, Adobe is shut down for the holidays which is why you're seeing a delay. Adobe will resume work again on January 2nd.
If you can private message me your contact information, I can contact our sales team to make sure they are aware of your request.
Sent from my mobile,
/Eric -
Getting the best possible output video quality in Premiere 8.0
Here is my PC information:
Windows 7 64 bit
Intel Quad Core Q6600 @2.40 Ghz
4.0 GB of Ram
My Camera information:
Kodak Playsport HD
Records videos in HD 720P @ 60 FPS
Saves movies in .MOV format, 1280 x 720 resolution, and H.264 codec
Now I am playing around with the settings but when I edit movies in Premiere Elements and then save it I always lose a lot of quality. I'm not really interested in sharing the videos on the web, I'm just looking for the best possible quality (as close to how it looks in its original form) for viewing on my home computer. Can anybody help me out with decent export settings that will give me the best overall quality?Hello Bill and thank you for your respone, I appreciate it. I've managed to get the overall quality of the movie a lot better with using different presets at new project. I am now using the preset NTSC-HDV-HDV720p 30 and that seems to be working a lot better. I also save the final movies as a Quicktime file, with a Local Area Network (LAN) and then I go to advanced and bring up the quality to 100, change it to 1280x720, bring the frame rate up to 60, and set the bitrate at 8000.
I am now having a different problem however. It seems that when I add a music to the background the song messes up frequently. What I mean is that when I'm watching the movie I created the video will be playing normally and then at random times the song will skip or get choppy. Then on top of that, with certain transitions between scenes the transition won't even work, it will just freeze for a bit and then skip to the next scene (On a side note, I leave the "Field Type" as "Progressive" and the "Aspect" as "Square Pixels [1.0] simply because I'm not sure what those are for).
I just uploaded this practice video to youtube, if you want to check it out it's at http://www.youtube.com/watch?v=eVorCPASaGM
Keep in mind I just threw together a couple random pictures and clips just to practice haha. You will be able to notice that the song and video get slightly choppy for some reason.
Thanks in advance! -
How to get the PDF Document version when using Digital Signature
Hi,
I have a form which contains two signature fields.
When i sign the form the pdf document is saved as a version which can be seen by clicking the Signature Panel.
I need to get the binary of the versions stored in the form.
Please suggest me the how to get the version data from the form.
Regards,
S.V.atish KumarHi Mithun:
I think I have run into a similar issue and have not been able to find a resolution.
I have been trying to place three groupings of data and limit them to 15 rows; additional rows would print on a void check on a next page using the rtf template.
Earnings .............. Pre-Tax Deductions .........Taxes
<line 1 earnings> <line 1 pre-tax deductions> <line 1 tax dedcutions>
<line 2 earnings> <line 2 pre-tax deductions> <line 2 tax dedcutions>
<line 3 earnings> <line 3 pre-tax deductions>
<line 4 earnings> <line 4 pre-tax deductions>
<line 5 earnings>
<line 6 earnings>
The template works fine with these lists as nested tables until I add in the restriction and filler for the 15 rows for the first table. The data in the 2nd two lists does not appear once the limitation is added.
Check Writer (XML) - Issues with payroll check stub in rtf
As an alternative, I have been thinking adding the remaining line totals (over 15 rows) and adding a 16th row. However I have been running into an error when trying to use the code for-each-group.
*** XML-22056: exactly one of four group attributes must be present in xsl:for-each-group
Can you send me your template to review? My email is: Karen.Lacey(AT)paetec(DOT)com
Thanks!
Edited by: RedLacey on Dec 17, 2009 11:48 AM -
How to get the URL parameter value when navigating from JSP Page to portal
Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi MHi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar -
How to get the best sound from iMac?
Has anyone heard of "Pure Music"? Supposedly it's able to make music sound better. I downloaded it for a 15 day trial but haven't figured out how to get it to work with itunes radio. I'm using Klipsch 2.1 speakers with a late '13 iMac 3.1 quad core i7 w/ Yosemite. I'm not unhappy with the sound. Just wondering if there are any ways to enhance or tweak to get the best sound out of my system.
*just a little update, I fixed the problem.
I was suppose to put the Nvidia driver controller for the select program tab as well
Everything is running much smoother now, and I also had to turn off eco mode lol. -
How to get the best results using the refine edge tool?
how to use the sliders in the refine edge tool? how do you get the best results using the fine edge tool?
You should ask in the forum for the (un-named) program you are using
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
When call a webservice opreation, it returns an array of complex type, sure, the calling is successed, but i don't know how to get the return values,
I have tried use Pendingcall.response & Pendingcall.getOutPutValues() in Pendingcall.onResult event function...
Waiting....Flash Lite doesn't fully support webservices, so you will find it difficult to use the full api set.
I suggest that you use SWX (swxformat.org) or simply HTTP requests for transactions.
We have a tutorial on use with ColdFusion here:
http://vimeo.com/6829083
Mark -
IDVD quality update... how to get the best looking photo images on your TV
To get the best quality photo slideshow (that looks the best on my TV)
1) create the slideshow with music in "Photo to Movie" program
2) send it to IDVD from "Photo to Movie"
3) create the menu in iDVD
4) make a disc image from iDVD (file - save as disk image) save on the desktop
5) burn DVD at x2 in disc utilities on a Verbatim DVD-R disc
???? Any other suggestions to get a better quality product !!
* special thanks to SDMacuser for all your help and prior posts.
Cheers
iMAC 5,1,Intel Core 2 Duo,2.16GHz Mac OS X (10.4.8)
iMAC 5,1,Intel Core 2 Duo,2.16GHz Mac OS X (10.4.8)in search of the best looking photoslide show DVD to view on a TV..... a couple more questions
if I understand some of the recent posts to get a clear picture:
Question #1
I need to import all of the photos into photoshop CS (or a similar product) and resize them to 1280 x 960 (4:3)ratio then open iDVD and import them.
If I am doing Ken Burn effects then resize them to 2560 x 1920 and use "Photo to Movie" to create the slideshow then import into iDVD (to get a cool menu)
can you just bring the images in from iphoto (in the same format that they were imported from the camera)?
I am using a Nikon D70 6.0 megapixel
Question #2
If I burn the disc in iDVD... it is not as good as using Disk utility or Toast because of the burn speed (2X) ... is this correct?
Maybe you are looking for
-
What cable(s) do I need? And is there any way to extend the length of these cables to at least 3-4 feet?
-
HtmlHelp doesn't display my chm file for HH_DISPLAY_TOC
Hi there, I have an MFC application to display a CHM help file generated from RoboHelp. I override WinHelp to map HELP_* macros to HH_* macros such as HELP_CONTENTS to HH_DISPLAY_TOC and HELP_CONTEXT to HH_HELP_CONTEXT, and call htmlhelp API to open
-
SAP transaction iView not executing the transaction directly
Hello guys, having a little problem with SAP transaction iView I created - specified system, where the transaction is delpoyed. When I click on the page containing the iView, R/3 logon page comes up instead of the transaction itself being executed. T
-
When i open ichat, it kind of goes crazy between connecting and loosing connection and then it says it could not connect with my AIM account. Does anyone know how to solve this? You can e-mail me at [email protected] cause I will prolly forget to che
-
Create OutputFile in jsp and write this file to response
Hello Please can you help me I need to dynamically create a file in jsp and send this file to user Please help