How to get the best sound from iMac?

Has anyone heard of "Pure Music"?  Supposedly it's able to make music sound better.  I downloaded it for a 15 day trial but haven't figured out how to get it to work with itunes radio.  I'm using Klipsch 2.1 speakers with a late '13 iMac 3.1 quad core i7 w/ Yosemite.  I'm not unhappy with the sound.  Just wondering if there are any ways to enhance or tweak to get the best sound out of my system.

*just a little update, I fixed the problem.
I was suppose to put the Nvidia driver controller for the select program tab as well 
Everything is running much smoother now, and I also had to turn off eco mode lol.

Similar Messages

  • How can i get the best sound from my electric guitar?

    Hello,
    I'm new to the Apple forums. I have come seeking some knowledge about how I can make my guitar sound really good like a metal/rock sound while at the same time not sounding unnaturally distorted but clean.
    I have a Macbook Air with a Griffin iMic. I have tried some of built in presets for metal/rock but they are either too noisy (background hiss) or they arn't rock like enough. I like the metal ones but they have too much hiss and it ruins my recordings (sounds like a jumbled mess in the end...)
    I'm not only new to the forums, but i'm also new to electric guitar and peddles. I'm certainly not new to guitar itself though, been playing for 7 years. What I really seek is what kind of settings I can have like a combination of the best amp model + pedals along with settings or effects to apply to it.
    Thanks in advance, I hope i provided enough info.
    Kris

    Linkandzelda wrote:
    I have a 1/8 to 1/4 adapter which i plug directly into the iMic. So theres no preamp involved, yet.
    You can by pass the iMic by using the same adaptor and plugging straight into the Line in on your mac. Try it and see if there is a difference in your sound.
    Regarding settings, I was able to develop one which has minimal noise levels but also some distortion. I will defiantly experiment more...
    Yeah, the key is to start with as clean a sound as possible and then add in little bits. Start adding with a Chorus effect first, then maybe a slight delay. Try all of your setting with both strumming and picking, both fast and slow, as you often have to match your playing technique with how the effects are set up. Then add Fuzz/Distortion etc. Once you have done that then reverse the set up sequence by starting with the major signal modifiers like Distortion etc and add the chorus, flanger, phasers after. These sorts of strategies can change the way things sound. Don't forget a bit of reverb.
    The key is to start simple with mild alterations. Also, find a few guitar sounds you like from your favorite songs where you can hear good clear guitar sounds. Maybe create a playlist in iTunes and use these as a reference to compare between what you like and what you are creating. This A-B'ing will go along way to helping you develop your 'taste'. Its great to hear things side by side.
    Goggle each of the guitar effects and learn what they do, make a few simple notes as a reference. Basically educate yourself.
    and invest in a M-Audio Fast track 2 as i suspect the griffin is causing the noise.
    Personally I would recommend something a bit better than the M-Audio Fast Track USB. The quality of your recorded sound is dependent on the sound converters in your external devices. I am not sure there is any advantage over your built in sound card verses the Fast Track. There are other things to consider with sound cards so it pays to do some planning and research.

  • How to get the return values from a web page

    Hi all :
       how to get the return values from a web page ?  I mean how pass values betwen webflow and web page ?
    thank you very much
    Edited by: jingying Sony on Apr 15, 2010 6:15 AM
    Edited by: jingying Sony on Apr 15, 2010 6:18 AM

    Hi,
    What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
    Regards,
    Karri

  • How to get the current week from sysdate?

    Hi sir,
    i want to know how to get the current week from sysdate?
    thanks

    Hi Nicolas
    It seems you like to check my post and also make commend ;) thanks for your attention
    Have you ever read the posts above and given solutions ?Yes, I did
    Have you read the docs ? Yes, I checked
    What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
    => Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
    So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
    Hope my answer could satisfy you..
    One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
    I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
    Thank you
    Regards
    Helios

  • How to get the selection parameters from logical database into one of the t

    Hi Sap ABAP Champians,
    How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
    Please help me for this
    Thanks
    Basu

    Hi
    Thanks, that will work, but then I'll have to insert code into all my reports.
    I can see that "Application Server Control Console" is able to rerun a report.
    This must mean that the Report Server has access to the runtime parameters.
    But how?
    Cheers
    Nils Peter

  • How to get the date starting from 1 to the current date from the system dat

    Dear all,
    Please tell me how to get the date starting from 1 based on the system date
    and it should come with respect of time also.
    example.
    suppose today is 6 Dec, 2006
    so ABAP report should find the 1 dec. 2006.
    Please help me as soon as possible.
    Regards,

    concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
    or yo ucan use the fm:
    HR_JP_MONTH_BEGIN_END_DATE
    usage:
        call function 'HR_JP_MONTH_BEGIN_END_DATE'
             exporting
                  iv_date             = sy-datum
             importing
                  ev_month_begin_date = gv_begda
                  ev_month_end_date   = gv_endda.
    Regards,
    Ravi
    Message was edited by:
            Ravi Kanth Talagana

  • How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    Hi,
    Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
    Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
    But this only works if the URL i give points to a static html page.
    So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
    Have u ever tried to do some things like this?
    Rahul

  • How to get the Database type from weblogic Db connection

    I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
    What my question is how to get the database type from the connection.

    For a normal jdbc driver you can use
    Connection.getMetaData()
    To get the meta data, in particular the getDatabase...() methods.
    That might or might not work.
    However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

  • How to get the XML messages from JMS Queue in BPM

    I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
    can you please send me the code to get the XML messages from the JMS Queue.
    Thank you,

    Hi,
    Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
    artifactInfoNodes as Any[]
    xmlObject as Fuego.Xml.XMLObject = XMLObject()
    load xmlObject using xmlText = message.textValue
    . . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
    Hope this helps,
    Dan

  • How to get the FILE COUNT from File directory

    Hello,
    i have to develop a scenario like, get  the file count from source file directory and validate whether the file count is 5 or not. if 5 files exist i need to process those 5 files to DB tables. if file count is not equal to 5 then i need to send a mail to customer that files are missed at source directory. (subject as files were missed at source directory and in content i need to display the file names exist at source file directory. So that missed file will be generated by the customer based on this mail).
    Could you please let me know how to get the count of files from source file directory. if it is possible only with UDF please provide the Java code
    Best Regards,
    SARAN

    Do these files have some fixed names?
    Can you try to use the option Advanced Selection For Source File to make XI  pick all 5 files in one shot?
    Check this blog on the same -
    /people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    If this is not a option - BPM sounds the only possible way.
    Regards,
    Bhavesh

  • How to get the query values from the url in a servlet and pass them to jsp

    ok..this is the situation...
    all applications are routed through a login page...
    so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
    so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

    ok..this is the situation...Sounds like you have a bad design on your hands.
    You're going to send passwords in a GET request as clear text? Nice security there.
    Why not start with basic security and work your way up?
    %

  • System Overload & How to get the best G4 Performance

    Okay all you Logic and OSX Gurus. I need your help. I've finally made the LOGIC leap from OS9 and have hit the SYSTEM OVERLOAD wall like many of you before me.
    I've been pouring over this, and many other Forums and Blogs, for about two weeks now, and have tried many of the fixes / solutions to no avail. I estimate I'm now getting about 25% of my OS9 Logic performance from Logic in OSX.
    One specific case in point is this. A four minute song sketch. No tempo changes. Four midi tracks, 6 Audio instruments and 2 EFX (1 Guitar Amp Pro, 1 Space Designer that's no even being used).
    I have unsuccessfully tried to Bounce this to disc for two weeks now. The AUDIO and DISK I/O Meters barely register until the GUITAR AMP PRO track brings the AUDIO METER up to about 1/3rd usage. At various points in the Bounce the G4 will completely FREEZE, and I will have manually restart.
    THINGS I HAVE TRIED, and continue to try are:
    - Repairing Permissions
    - Trashing Preferences
    - Updating MOTU Drivers
    - Changing Processor performance setting - which I cannot do BTW, because my system does not seem to support this option.
    - Closing all Widgets
    - Freeing up more Space on my Mac OSx startup disk (I now have 78.41 Gig available on a 114.49 Gig drive)
    - Run Cocktail to clean up System logs and temporary files
    - FREEZING TRACKS as a temporary 'fix'. This did nothing BTW but add more strain to the CPU and I still had about 1/3rd the usage with my GUITAR AMP Plugin (and it still crashed).
    - Increased AUDIO BUFFER to 1024
    So, (and I guess this is really two sides of the same question)...
    1) How do I FIX this SYSTEM OVERLOAD problem, and
    2) How do I "optimize" my Dual 1.25 G4 in order to get the best performance possible out of LOGIC PRO?
    OTHER QUESTIONS I HAVE ARE:
    - Does the G4 have the processing power needed to run LOGIC PRO?
    - I'm confident adding RAM will "help" (can't hurt), but am I really dealing with a RAM Problem here or, again, can these processors really handle it?
    BTW - I'm not looking for an excuse to go shopping for a Quad G5 (I mean who needs an excuse... . But, I'm really trying to determine if at the end of the day I will spend money on RAM, Hard Drives, whatever..., and then still be frustrated and end up shopping.
    - Are SCSI drives a problem with Tiger / Logic? These Cheetah drives are fast (10,000 RPM), reliable, and have been great drives to record on. I'm trying to do this simple bounce to one of the Cheetahs and as I said it's just not happening.
    - Does the startup volume size effect performance?
    - Does the amount of free space on the start up drive effect performance?
    - Firewire 400 vs 800? My sample library is on the Firewire drive, and I'm thinking this does not pull a lot on the CPU as these get loaded into memory before playing? Am I right about that? It is Firewire 400.
    A long letter and a lot of questions. I thank you all in advance for any answers, guidance or direction you can give. Please also let me know if there is something I HAVEN'T asked, looked at or should be doing.
    Best,
    Kevin
    Kevin Saunders Hayes
    SYSTEM SPECS
    Machine Name: Power Mac G4
    Machine Model: PowerMac3,6
    CPU Type: PowerPC G4 (3.3)
    Number Of CPUs: 2
    CPU Speed: 1.25 GHz
    L2 Cache (per CPU): 256 KB
    L3 Cache (per CPU): 2 MB
    Memory: 1 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.4.8f2
    Logic 7.1.1 (885)
    Pro Application Support 3.1
    MOTU 896 - Latest drivers
    2 - Seagate Cheetah 9 gig SCSI drives
    1 - Oxford Firewire (Up to 400 Mb/sec) with EXS Library
    G4 Duel 1.25   Mac OS X (10.4.3)  

    And after months of using Express, and a week of
    using Logic, I hadn't had a system overload until
    today. Now I'm having them all the time. It wasn't a
    set up change, it wasn't running on the battery, it
    wasn't running software monitoring, it's set up with
    512 i/o buffer, medium processor buffer. And it
    wasn't brought on by number of tracks - that's for
    sure. After it started happenind and I took a break &
    came back, I was sitting on my couch, Powerbook in
    my lap, tapping a beat in with the onscreen
    keyboard.... a SINGLE instrument, mind you. NO plugs,
    no other tracks of ANY kind. And it happened.
    There's a lot of great, relevant and very helpful info on this forum and it all helps and it all counts. But..... so many people are suffering this when moving up to Pro 7 from either Pro 6 or Express. One expects a change in system load when a major update comes along but more and more people are reporting that simply recording 1 or 2 tracks of audio, pure, no plug-ins or EQ is causing an overload whereas in the previous version(s) this was easily accomodated. This, you may have guessed, has happened to me as well. Are we to accept in 1 version increment (albeit a major one) there is such a massive increase in demand from hardware that you cannot record a pure no-plug-in stereo track? When going back to 6.4.3 it will happily record 8 at once, let you EQ and reverb and then do another 8 AND then another. With no troble at all.
    It is pointing more and more towards fundamental flaws in the programming. Did L7 come out too soon? Are we just beta testing what is pro software? We are only on 7.1.1 and 6 went to 6.4.3 but at no stage was it this bad at the fundamentals of what the App is for. I love Logic, I really do, but I think, even with all the great help we are fighting what Apple should be addressing. Not that you can find/contact/talk to or get any sort of response from them.
    I have tried but have gone back to 6.4.3 until 7.1.2 or even 7.2 appears, but I'm not paying for 7.2. My £200 upgrade from 6.4.3 is now sitting on a shelf desperately wanting to use it.

  • IDVD quality update... how to get the best looking photo images on your TV

    To get the best quality photo slideshow (that looks the best on my TV)
    1) create the slideshow with music in "Photo to Movie" program
    2) send it to IDVD from "Photo to Movie"
    3) create the menu in iDVD
    4) make a disc image from iDVD (file - save as disk image) save on the desktop
    5) burn DVD at x2 in disc utilities on a Verbatim DVD-R disc
    ???? Any other suggestions to get a better quality product !!
    * special thanks to SDMacuser for all your help and prior posts.
    Cheers
    iMAC 5,1,Intel Core 2 Duo,2.16GHz   Mac OS X (10.4.8)  
    iMAC 5,1,Intel Core 2 Duo,2.16GHz   Mac OS X (10.4.8)  

    in search of the best looking photoslide show DVD to view on a TV..... a couple more questions
    if I understand some of the recent posts to get a clear picture:
    Question #1
    I need to import all of the photos into photoshop CS (or a similar product) and resize them to 1280 x 960 (4:3)ratio then open iDVD and import them.
    If I am doing Ken Burn effects then resize them to 2560 x 1920 and use "Photo to Movie" to create the slideshow then import into iDVD (to get a cool menu)
    can you just bring the images in from iphoto (in the same format that they were imported from the camera)?
    I am using a Nikon D70 6.0 megapixel
    Question #2
    If I burn the disc in iDVD... it is not as good as using Disk utility or Toast because of the burn speed (2X) ... is this correct?

  • How to get the selected values from the shuttle

    Hi
    Please tell me how to get the selected option values from the shuttle leading list.
    Thanks

    you can also obtain the option values present in the leading and trailing lists using the
    following methods:
    public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
    webBean)
    public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
    webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
    order in which they appear in the list:
    String[] trailingItems =
    shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to get the selected values from a selectmanylistbox?

    Hi ADF Experts,
    <af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb2"
                            value="#{viewScope.TestBean.lovValue}"
                      autoSubmit="true"      valuePassThru="true">
        <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                       binding="#{viewScope.TestBean.selectedItems}"/>
      </af:selectManyListbox>
      <af:commandButton text="get selected values" id="cb3"
                        actionListener="#{viewScope.TestBean.getSelectedValues}"
                        partialSubmit="true"/>
      private List<String> lovValue;
      private List<SelectItem> actualList;
    //getters and setters
      public void getSelectedValues(ActionEvent actionEvent) {
        // Add event code here...
        for (String selectedItem : lovValue) {
            System.out.println("Selected item: " +selectedItem.); // this is giving 1 and 3 like this. how to get the checked values as I'm getting only the indexes. In this scenario I am populating the list programmatically.Just I wanted to know how can we get the selected values(not indexes). Please suggest.
    Thanks-
    Abhijit

    Hi Timo,
    As I am sharing the page fragment and the Java class. So its my usecase I have mentioned below
    I am sharing the jsff page fragment and java class. So that it wud be of help to others.
    jsff page fragment
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
              xmlns:f="http://java.sun.com/jsf/core">
            <af:panelGroupLayout id="pgl1">
              <af:commandButton text="Search"  id="cb1"
                                actionListener="#{viewScope.TestBean.searchSupplier}"/>
    </af:panelGroupLayout>
        <af:popup id="p1" binding="#{viewScope.TestBean.searchSupplierPopup}">
              <af:dialog id="d2"
                         type="none">
               <af:table value="#{bindings.Contacts.collectionModel}" var="row"
                      rows="#{bindings.Contacts.rangeSize}"
                      emptyText="#{bindings.Contacts.viewable ? 'No data to display.' : 'Access Denied.'}"
                      fetchSize="#{bindings.Contacts.rangeSize}"
                      rowBandingInterval="0"
                      binding="#{viewScope.TestBean.tsupportIssues}"
                      filterModel="#{bindings.ContactsQuery.queryDescriptor}"
                      queryListener="#{bindings.ContactsQuery.processQuery}"
                      filterVisible="true" varStatus="vs"
                      selectionListener="#{bindings.Contacts.collectionModel.makeCurrent}"
                      rowSelection="multiple" id="t1">
              <af:column sortProperty="name" filterable="true" sortable="true"
                         headerText="#{bindings.Contacts.hints.name.label}" id="c2">
                <af:outputText value="#{row.name}" id="ot1"/>
              </af:column>
              <af:column sortProperty="email" filterable="true" sortable="true"
                         headerText="#{bindings.Contacts.hints.email.label}"
                         id="c1">
                <af:outputText value="#{row.email}" id="ot2"/>
              </af:column>
            </af:table>
          <af:commandButton text="OK" id="cb5" partialSubmit="true"       actionListener="#{viewScope.TestBean.testMethod}"/>
          <af:commandButton text="Cancel" id="cb6"
                            actionListener="#{viewScope.TestBean.cancelPopupSearch}"/>
        </af:dialog>
            </af:popup>
      <af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb5"
                            value="#{viewScope.TestBean.lovValue}"
                      autoSubmit="true"      valuePassThru="true"
                            binding="#{viewScope.TestBean.prp1}">
        <f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
                       binding="#{viewScope.TestBean.selectedItems}"/>
      </af:selectManyListbox>
      <af:commandButton text="get selected values" id="cb3"
                        actionListener="#{viewScope.TestBean.getSelectedValues}"
                        partialSubmit="true"/>
      <af:commandButton text="remove selected" id="cb4"
             partialSubmit="true"           actionListener="#{viewScope.TestBean.removeSelectedValues}"/>
    </jsp:root>
    TestBean.java
    package com.demo.view;
    import java.util.ArrayList;
    import java.util.Iterator;
    import java.util.List;
    import javax.faces.component.UISelectItems;
    import javax.faces.event.ActionEvent;
    import javax.faces.model.SelectItem;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.binding.DCBindingContainer;
    import oracle.adf.model.binding.DCIteratorBinding;
    import oracle.adf.view.rich.component.rich.RichPopup;
    import oracle.adf.view.rich.component.rich.data.RichTable;
    import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
    import oracle.adf.view.rich.context.AdfFacesContext;
    import oracle.adf.view.rich.event.DialogEvent;
    import oracle.jbo.Key;
    import oracle.jbo.Row;
    import oracle.jbo.RowSetIterator;
    import org.apache.myfaces.trinidad.model.RowKeySet;
    public class TestBean {
      private RichTable tsupportIssues;
      private List<SelectItem> lovValue;
      private List<SelectItem> actualList;
      private RichSelectManyListbox prp1;
      private List valuesChoosed = new ArrayList();
      private UISelectItems selectedItems;
      private RichPopup searchSupplierPopup;
        public TestBean() {
        super();
      public void setTsupportIssues(RichTable tsupportIssues) {
        this.tsupportIssues = tsupportIssues;
      public RichTable getTsupportIssues() {
        return tsupportIssues;
      public void testMethod(ActionEvent actionEvent) {
        // Add event code here...
        // For learning purposes - show Select Many Button clicked 
         System.out.println("Select Many Button has been Clicked");
        // // RowKeySet Object can hold the selected rows from a user as follows    
        RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
        // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows 
        Iterator itrSelectedRows = rksSelectedRows.iterator();  
        // Get the data control that is bound to the table - e.g.
        // OpenSupportItemsIterator    
        DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry(); 
        DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator"); 
        // Information from binding that is specific to the rows  
        RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();   
        // Loop through selected rows  
        int i=1;
        while (itrSelectedRows.hasNext()) {        
          // Get key for selected row    
          Key key = (Key)((List)itrSelectedRows.next()).get(0);  
          // Use the key to get the data from the above binding that is related to the row      
          Row myRow = rsiSelectedRows.getRow(key);         
          // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces       
          System.out.println(myRow.getAttribute("name"));
          valuesChoosed.add(myRow.getAttribute("name"));
    //        actualList = new ArrayList<SelectItem>();
    //        String j = Integer.toString(i);
    //        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
    //      i++;
           searchSupplierPopup.hide();
          AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
      public void setLovValue(List<SelectItem> lovValue) {
        this.lovValue = lovValue;
      public List<SelectItem> getLovValue() {
        return lovValue;
      public void setActualList(List<SelectItem> actualList) {
        this.actualList = actualList;
      public List<SelectItem> getActualList() {
        actualList = new ArrayList<SelectItem>();
        if(valuesChoosed.size()!=0){
        for(int i=0;i<valuesChoosed.size();i++){
          actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
        else{
          actualList.add(new SelectItem("1","Select One"));
        return actualList;
      public void setPrp1(RichSelectManyListbox prp1) {
        this.prp1 = prp1;
      public RichSelectManyListbox getPrp1() {
        return prp1;
      public void setValuesChoosed(List valuesChoosed) {
        this.valuesChoosed = valuesChoosed;
      public List getValuesChoosed() {
        return valuesChoosed;
      public void getValues(ActionEvent actionEvent) {
        // Add event code here...
        for(int i=0;i<valuesChoosed.size();i++){
          System.out.println(valuesChoosed.get(i));
      public void getSelectedValues(ActionEvent actionEvent) {
        // Add event code here...
         for(int i=0;i<this.getLovValue().size();i++){
             System.out.println("Selected Value:"+this.getLovValue().get(i));
      public void removeSelectedValues(ActionEvent actionEvent) {
        // Add event code here...
      public void setSelectedItems(UISelectItems selectedItems) {
        this.selectedItems = selectedItems;
      public UISelectItems getSelectedItems() {
        return selectedItems;
        public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
            this.searchSupplierPopup = searchSupplierPopup;
        public RichPopup getSearchSupplierPopup() {
            return searchSupplierPopup;
        public void cancelPopupSearch(ActionEvent actionEvent) {
            // Add event code here...
            searchSupplierPopup.hide();
        public void searchSupplier(ActionEvent actionEvent) {
            // Add event code here...
            RichPopup.PopupHints hints = new RichPopup.PopupHints();
            searchSupplierPopup.show(hints);
    package com.demo.view;
    import java.util.ArrayList;
    import java.util.Iterator;
    import java.util.List;
    import javax.faces.component.UISelectItems;
    import javax.faces.event.ActionEvent;
    import javax.faces.model.SelectItem;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.binding.DCBindingContainer;
    import oracle.adf.model.binding.DCIteratorBinding;
    import oracle.adf.view.rich.component.rich.RichPopup;
    import oracle.adf.view.rich.component.rich.data.RichTable;
    import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
    import oracle.adf.view.rich.context.AdfFacesContext;
    import oracle.adf.view.rich.event.DialogEvent;
    import oracle.jbo.Key;
    import oracle.jbo.Row;
    import oracle.jbo.RowSetIterator;
    import org.apache.myfaces.trinidad.model.RowKeySet;
    public class TestBean {
      private RichTable tsupportIssues;
      private List<SelectItem> lovValue;
      private List<SelectItem> actualList;
      private RichSelectManyListbox prp1;
      private List valuesChoosed = new ArrayList();
      private UISelectItems selectedItems;
      private RichPopup searchSupplierPopup;
        public TestBean() {
        super();
      public void setTsupportIssues(RichTable tsupportIssues) {
        this.tsupportIssues = tsupportIssues;
      public RichTable getTsupportIssues() {
        return tsupportIssues;
      public void testMethod(ActionEvent actionEvent) {
        // Add event code here...
        // For learning purposes - show Select Many Button clicked 
         System.out.println("Select Many Button has been Clicked");
        // // RowKeySet Object can hold the selected rows from a user as follows    
        RowKeySet rksSelectedRows =         this.getTsupportIssues().getSelectedRowKeys();
        // Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows 
        Iterator itrSelectedRows = rksSelectedRows.iterator();  
        // Get the data control that is bound to the table - e.g.
        // OpenSupportItemsIterator    
        DCBindingContainer bindings =         (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry(); 
        DCIteratorBinding dcIteratorBindings =         bindings.findIteratorBinding("findAllContactsIterator"); 
        // Information from binding that is specific to the rows  
        RowSetIterator rsiSelectedRows =         dcIteratorBindings.getRowSetIterator();   
        // Loop through selected rows  
        int i=1;
        while (itrSelectedRows.hasNext()) {        
          // Get key for selected row    
          Key key = (Key)((List)itrSelectedRows.next()).get(0);  
          // Use the key to get the data from the above binding that is related to the row      
          Row myRow = rsiSelectedRows.getRow(key);         
          // Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces       
          System.out.println(myRow.getAttribute("name"));
          valuesChoosed.add(myRow.getAttribute("name"));
    //        actualList = new ArrayList<SelectItem>();
    //        String j = Integer.toString(i);
    //        actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
    //      i++;
           searchSupplierPopup.hide();
          AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
      public void setLovValue(List<SelectItem> lovValue) {
        this.lovValue = lovValue;
      public List<SelectItem> getLovValue() {
        return lovValue;
      public void setActualList(List<SelectItem> actualList) {
        this.actualList = actualList;
      public List<SelectItem> getActualList() {
        actualList = new ArrayList<SelectItem>();
        if(valuesChoosed.size()!=0){
        for(int i=0;i<valuesChoosed.size();i++){
          actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
        else{
          actualList.add(new SelectItem("1","Select One"));
        return actualList;
      public void setPrp1(RichSelectManyListbox prp1) {
        this.prp1 = prp1;
      public RichSelectManyListbox getPrp1() {
        return prp1;
      public void setValuesChoosed(List valuesChoosed) {
        this.valuesChoosed = valuesChoosed;
      public List getValuesChoosed() {
        return valuesChoosed;
      public void getValues(ActionEvent actionEvent) {
        // Add event code here...
        for(int i=0;i<valuesChoosed.size();i++){
          System.out.println(valuesChoosed.get(i));
      public void getSelectedValues(ActionEvent actionEvent) {
        // Add event code here...
         for(int i=0;i<this.getLovValue().size();i++){
             System.out.println("Selected Value:"+this.getLovValue().get(i));
      public void removeSelectedValues(ActionEvent actionEvent) {
        // Add event code here...
        for(int i=0;i<this.getLovValue().size();i++){
            System.out.println("Selected Value:"+this.getLovValue().get(i));
            System.out.println(this.getLovValue().remove(i));
          AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
      public void setSelectedItems(UISelectItems selectedItems) {
        this.selectedItems = selectedItems;
      public UISelectItems getSelectedItems() {
        return selectedItems;
        public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
            this.searchSupplierPopup = searchSupplierPopup;
        public RichPopup getSearchSupplierPopup() {
            return searchSupplierPopup;
        public void cancelPopupSearch(ActionEvent actionEvent) {
            // Add event code here...
            searchSupplierPopup.hide();
        public void searchSupplier(ActionEvent actionEvent) {
            // Add event code here...
            RichPopup.PopupHints hints = new RichPopup.PopupHints();
            searchSupplierPopup.show(hints);
    Thanks,
    A. Abhijit

Maybe you are looking for