How to get the bluetooth enabled on Satellite X200-20S

Hi
Can anyone tell me how to get the bluetooth enabled on the X200-20S?
Thanks

Hi
I have the same problem. When a try to permute wifi/bluetooth the PC says it can't. I don't understand why? The swith is on but i can't. it's a big problem for me.

Similar Messages

OEM Vista 32-bit - how to get 64-bit install disk - Satellite X200/N00

I have a Satellite X200/N00 purchased earlier this year. It came with OEM 32-bit Vista Ultimate preinstalled.
This has mostly been working well but for various reasons I want to move to 64-bit Vista.
If you purchase a retail version of Vista Ultimate it comes with both 32-bit & 64-bit versions in the box.
Does Toshiba offer 64-bit version as part of their OEM licence, and if so, how do I get a copy?

Hi
Something like that is not known to me and I doubt you could get a 64bit OS for free.
Maybe Microsoft provides such 64bit Vista OS if you buy an Microsoft Vista 32bit.
But the point is that Toshiba preinstalled Vista OS is an OEM version and a part of the recovery disk.
I doubt that its a case using an Recovery disk...

How do i get the bluetooth to work om My 3GS?

How do i get the bluetooth to work on My 3GS?

File transfers over BT are not a feature of the iPhone. There are some apps in the App Store that will let you transfer photos from one iOS device to another. There may also be some that will allow music. Search the App Store and read the reviews before buying.
For what it's worth, file transfer over BT is very slow.

How I got the Bluetooth Magic mouse and Aluminum keyboard to work in XP

NOTE: The following steps fixed my issue. I thought I would share what worked for me but I really don't ever visit these discussion groups. I used a combination of Sysinternal tools to isolate what was causing my issue and rectified it.
I couldn't for the life of me get the bluetooth magic mouse and keyboard working in a bootcamp'd windows xp. Here are the steps that I performed to finally get it to work. The assumptions are that you are running a clean XP build with SP3 and all windows updates installed.
1. Using a USB mouse and keyboard. Insert the OS X install disc into the drive and run through the bootcamp drivers install. (These steps are outlined at Page 12 in the Apple Boot Camp Installation Guide: http://manuals.info.apple.com/en/bootcampinstall-setup.pdf). Let the installers run per apple instructions in the bootcamp installation guide. At the end it will want to reboot. Reboot the system.
2. After the system reboots login and run the Apple Software Update utility to update from bootcamp 3.1 to 3.2. It will run through a bunch of installers and ask to reboot at the end. Reboot.
3. After the system reboots login and go to start=>run and type "services.msc" to bring up the services control panel.
4. Double-click the "Bluetooth Support Service" to open the properties.
5. Go to the "log on" tab and look to see what is set. If it is set to "NT Authority\LocalService" then click above it to change to "Local System account." Then click "OK." It will tell you the changes won't take effect until the service is restarted. No worries.
6. You will be back in the main services control panel. Make sure the "Bluetooth Support Service" is highlighted and look up to the left and select "restart the service."
7. Close all the open windows and then go to start=>run and type "control panel" and hit enter.
8. Double-click the "Bluetooth devices" control panel applet and follow the Apple instructions provided on Page 18 of the guide referred to earlier. Start with the mouse first. Stop when done with the mouse and don't continue on to the keyboard yet.
9. At this point my mouse was "installed" but did not show "connected" in the bluetooth devices applet. I then highlighted the mouse and clicked the "properties" button down to the right.
10. Once in the properties of the mouse I selected the "services" tab. My issue before making the switch to "Local System" account for the Bluetooth services was then when I tried to click the check box to enable "Drivers for keyboard, mice, etc (HID)" I would get an "access denied" error. Now that the switch has been made you should be able to click that check box without error. Click OK after enabling.
11. You will suddenly see systray (lower right of the screen where the clock is) saying that new hardware has been detected and enabled. Once this is all done you will see "connected" below the device in the Bluetooth applet. Give your mouse a go. It should be working now. Sweet!
12. Follow the steps in the Apple guide for your keyboard. This should work too now. Sweet!
Best of luck.

It depends on how far it is and how thick your walls are. If there plasterboard partitions and only 10 feet apart then probably.
If you have a mobile phone with bluetooth, then try sending the computer a picture of file from similar distances to that you intend using the keyboard, if it works then a bluetooth keyboard and mouse should.

How to get the values from html:select? tag..?

i tried with this, but its not working...
<html:select styleClass="text" name="querydefs" property="shortcut"
             onchange="retrieveOptions()" styleId="firstBox" indexed="true">
<html:options collection="advanced.choices" property="shortcut" labelProperty="label" />
</html:select>
                    <td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>

<td align="left" class="rowcolor1">
                    <script language="javascript" type="text/javascript">
                          function retrieveOptions(){
                         var sel = document.querydefs.options;
                         var selectedOption = sel[sel.selectedIndex].value;
                         document.write(selectedOption);
                       </script>This java script is not working at all..its not printing anything in document.write();
This is code..
<td class="rowcolor1" width="20%">
<html:select styleClass="text" name="querydefs" property="shortcut"
                         onchange="retrieveSecondOptions()" styleId="firstBox"
                         indexed="true">
                         <html:options collection="advanced.choices" property="shortcut"
                              labelProperty="label" />
                    </html:select>i tried with this also. but no use..i'm not the getting the seleced option...
function retrieveOptions(){
firstBox = document.getElementById('firstBox');
                         if(firstBox.selectedIndex==0){
      return;
    selectedOption = firstBox.options[firstBox.selectedIndex].value;
}actually , how to get the values from <html:select> ...?
my idea is to know which value is selected from the combo box(<html:select> ) if that value is equal some string i have enable a hyperlink to open a popup window

I am thinking of buying a MacBook Air and am wondering how to get the content of my iPad into iTunes.

I have iTunes on an old pc and am thinking of buying a MacBook Air. I am wondering how to get the content of my iPad on to the Mac as I know that sync only happens in one direction, from pc to device. I assume therefore that when I attach my pad to the new Mac it will sync to an empty iTunes and I will have lost all the content of my pad. I know I can restore purchases, but what about contacts, calendar, photos and music not purchased from apple. I have a fairly recent backup on a pen drive but it is a usb2 device and is formatted for a pc. Any advice would be appreciated.

Do I copy my media library or from a backup. I have a backup on my pc and on an external drive. This drive is usb2 and formatted for windows so I can't connect it to a MacBook Air to make the transfer. Equally I don't think there is a way to connect the 2 computers via a cable ie usb2 one end and usb3 the other. Will the computers talk to each other via wifi if I enable home share although I think this is only for music which still leaves contacts, mail etc.
I am sorry to be such an ignoramus but any further help would be appreciated.

How to get the value of a checkbox in the backing bean

How to get the valaue of a checkbox in the backing bean?

Hi this may help you for selecting single check box
<h:outputText value="Enabled : "/>
                          <h:selectBooleanCheckbox value="#{Bean.isEnabled}"/>
                          <h:commandButton value="Submit" action="#{Bean.submit}"/>
private Boolean isEnabled;
    public Boolean getIsEnabled() {
        return isEnabled;
    public void setIsEnabled(Boolean isEnabled) {
        this.isEnabled = isEnabled;
    public String submit(){
     System.out.println(isEnabled);
        return isEnabled;
    }for selecting multiple check box
                          <h:selectManyCheckbox value="#{Bean.items}">
                              <f:selectItem itemLabel="one" itemValue="one" />
                              <f:selectItem itemLabel="two" itemValue="two" />
                              <f:selectItem itemLabel="three" itemValue="three" />
                           </h:selectManyCheckbox>
               <h:commandButton value="Submit" action="#{Bean.submit}"/>
private List<String> items;
    public List<String> getItems() {
        return items;
    public void setItems(List<String> items) {
        this.items = items;
    public String submit(){
        System.out.println("List : " + this.items);
        return "done";
    }Hope this helps you

How to get the list of active devices in current wifi network?

Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?

Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks

How to get the list of Group set in each Users in MS Active Directory

Hi. I would like to know if you know how to get the set group of each user in Active Directory?
We have this sample code
String INITCTX ="com.sun.jndi.ldap.LdapCtxFactory";
//String MY_HOST = "ldap://myserver/ou=dev,dc=test,dc=com,dc=ph";
String MY_HOST ="ldap://myserver.dev.test.com.ph:389/dc=dev,dc=test,dc=com,dc=ph";
String strUsername,strPassword;
try
     strUsername = Request.getParameter("username").toLowerCase().trim();
     strPassword = Request.getParameter("password").toLowerCase().trim();
     Hashtable env = new Hashtable();
     env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
     env.put(Context.PROVIDER_URL, MY_HOST);
     env.put(Context.SECURITY_AUTHENTICATION, "simple");
     env.put(Context.SECURITY_PRINCIPAL,strUsername+"@dev.lst.com.ph");
     env.put(Context.SECURITY_CREDENTIALS, strPassword);
After validating the User Name and Password the next task is to Retrieve the group list of the User.

Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
     initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks

BAPI_SCEC_CREATE - how to get the shopping cart to go to our workflow

Dear experts,
When a shopping cart is created using BAPI_SCEC_CREATE, it will get approved automatically. We want the shopping cart to go through our approval workflow. Is there any way to achieve this? I saw threads on similar question but there's no solution. It seems to be related to Sourcing relevant indicator (SOURCE_REL_IND) in table BBP_PDIGP. I've tried executing BAPI_SCEC_CREATE followed by BAPI_TRANSACTION_COMMIT and then BBP_PDIGP_DB_DIRECT_UPDATE to reset the SOURCE_REL_IND. However, it didn't work.
Does anyone know how to get the shopping cart created by BAPI_SCEC_CREATE to go to a workflow?
Thanks,
Lara

Hello Lara,
When a shopping cart is created using BAPI_SCEC_CREATE, it will get approved automatically. We want the shopping cart to go through our approval workflow. Is there any way to achieve this?
Have a look at SRM article below:
[Enable SRM Workflow for External Purchase Requisitions|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/5082a622-7310-2c10-1a9b-ef31dd69a770]
It seems to be related to Sourcing relevant indicator (SOURCE_REL_IND) in table BBP_PDIGP.
Check your customizing:
(in SRM 7.0) SAP Supplier Relationship Management > SRM Server > Sourcing > Define Sourcing for Product Categories
Depending on product category you used when creating your SC, its items are relevant or not for Sourcing.
Regards.
Laurent.

How to get the list of only installed bundled application on mac os X through programmatically???

how to get the list of only installed bundled software on mac os X through programmatically???

I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger.

How to get the status of service in rac

Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.

user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name                                      Null?    Type
SERVICE_ID                                         NUMBER
NAME                                               VARCHAR2(64)
NAME_HASH                                          NUMBER
NETWORK_NAME                                       VARCHAR2(512)
CREATION_DATE                                      DATE
CREATION_DATE_HASH                                 NUMBER
FAILOVER_METHOD                                    VARCHAR2(64)
FAILOVER_TYPE                                      VARCHAR2(64)
FAILOVER_RETRIES                                   NUMBER(10)
FAILOVER_DELAY                                     NUMBER(10)
MIN_CARDINALITY                                    NUMBER
MAX_CARDINALITY                                    NUMBER
GOAL                                               VARCHAR2(12)
DTP                                                VARCHAR2(1)
ENABLED                                            VARCHAR2(3)
AQ_HA_NOTIFICATIONS                                VARCHAR2(3)
CLB_GOAL                                           VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm

How to get the type of user role in ISF?

We have functionality to hide all the buttons on Monitor task, which was successfully achieved by javascript. But we need to enable these buttons for only Site Administrators, so that they only can do necessary modifications upon request from end users. Can someone point me to correct direction how to get the user role when a user is not a Site Administrator. Thanks in advance.

What about having your custom ISF onload script first run a db query (on older version called a rcFetch) which would evaluate if the person loading form is a member of the site admin ou.
Here's a rough example:
ISF_onLoad()
rcFetch('Q1','Q1PL=' + UserID);
This will then run a query to validate if the person is a member of the admin ou.
SELECT * FROM DirOrganizationUnitPeople WHERE PersonID = #P1# AND OrganizationalUnitID = 1 (this should be the id of the site admin ou or the ou which you are referring to as an admin)
then have a call back to determine if any records where return, which indicate the person is a member of the site admin ou.
function Q81_DataCallback(retArray, queryList)
if (retArray['Q8500._COUNT_'] == 1)
{ *Show the fields* }
Hope this helps.

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

WebGUI: How to get the users IP-address

Hello.
I have to develop a simple web-application, that will enable users to reset their forgotten passwords or to unlock themselves, if they are locked because of too many failed login-attempts.
As you can imagine, this application must not require a login. For security reasons any action has to be logged.
The username can not be used for logging-purposes, as the application is executed using a default-user defined in transaction SICF. That's why the IP-address of the user's pc has to be written into the log-table.
My problem is, that i do not know how to get it. I have read many articles on help.sap.com, searched in the sap notes, used Google and tried to find usefull functions in our SAP-system, but after two days it still does not work and i do'nt know, what else to try.
At the moment i am able to read the name of the client-pc with my test-coding.
  DATA:    lv_webgui TYPE xfeld.
  STATICS: lv_computer_name TYPE string,
           lv_username TYPE string.
  CLASS: cl_gui_frontend_services DEFINITION LOAD.
  lv_webgui = cl_gui_frontend_services=>www_active.
  IF lv_webgui EQ gc_true.
    " Begin of experimental coding #1
    CALL METHOD cl_gui_frontend_services=>get_computer_name
      CHANGING
        computer_name = lv_computer_name.
    " End of experimental coding #1
    " Begin of experimental coding #2
    CALL FUNCTION 'ITS_ENV_GET_VARIABLE'
      EXPORTING
        variable = 'COMPUTERNAME'
      CHANGING
        value = lv_computer_name.
    " End of experimental coding #2
    MESSAGE s000(38) WITH lv_computer_name.
  ENDIF.
The problem is, that the Internet Explorer 7 (version: 7.0.5730.13CO) shows a warning before the scripts, generated by the ITS, are executed on the client. If the user clicks "abort", the scripts are not executed and the name of the client-pc will not be returned to the server (experimental coding #1 returns the value 'localhost', experimental coding #2 returns an empty string).
That's why the experimental coding is quite useless, because the user is able to avoid it's execution.
In theory i could use experimental coding #2 and stop the execution of the program if an empty string is returned but some users in our company have administrator-privileges and so they can change environment-variables at will. So i am afraid, that this procedure is not an option.
I am quite sure, that there must be a way to read the IP-address directly from the ITS without using the functions in my experimental coding, but i have no clue how this could be done.
Any suggestions would be highly appreciated.
As i do'nt know how to determine the version of our ITS, i have to leave this information out for the moment. If anyone needs this information it would be very kind, if he or she could tell me how to get the required information.
EDIT: As we are using SAP ECC 6.0 and Services are maintained via transaction SICF, it should be ITS 6.40.
Regards
Jörg Neumann
Edited by: Jörg Neumann on Oct 16, 2009 1:27 PM

Hello Wolfgang.
Thanks for your reply.
I can imagine, that the application as described above seems to be very insecure, but the description is not complete - i left some parts out, as they were not relevant for my problem.
1.) The application can only be reached from our intranet.
2.) Unlocking / Resetting password can be done three times per day, which limits the number of attemps for cracking a password to a total of 20 per day.
3.) The owner of the account will receive an email if the acount was changed by the application. So if somebody tries to crack the password, the owner of the account will get a total
20 3 mails per day - which should make him/her at least a litte suspicious.
I know, that the logged data is quite worthless, as computername and username are read using clientside-scripting and there could be a proxy between the client and the server, but this is exaclty, what i have to develop.
I will keep the logging-problem in mind and talk about it in the next meeting, though i am quite sure, that it wo'nt change anything.
Regards Jörg Neumann
Edited by: Jörg Neumann on Oct 19, 2009 4:57 PM

How to get the bluetooth enabled on Satellite X200-20S

Similar Messages

Maybe you are looking for