How to get the BOX Serial No.

Someone, know how I can get the BOX Serial Number?
I tried with: java.lang.System.getProperty();, but i retrieve only the Company Manufacturer:
java.lang.System.getProperty("havi.implementation.vendor");
I see this in HAVI documentation Api but, i not found how i can get the serial number, anyone know what i can do? Or where i can find the right Api? or if is write in a file in the system and what file?
Thank you

I'm glad that you found the site useful.
The closest thing to a complete list of properties that's available is in the MHP spec in section 11.3.1.1, part g (yes, they couln't have hidden it much better)
The properties that must be supported by an MHP receiver are:
- file.separator
- path.separator
- line.separator
- dvb.returnchannel.timeout
- dvb.persistent.root (only available if the application has permission to access the persistent filesystem)
There are a couple of extra properties that you can get from the Xlet Context using getXletProperty():
- dvb.org.id
- dvb.app.id
- dvb.caller.parameters
dvb.org.id and dvb.app.id give you the organisation ID and application ID for that application, as indicated in the application signalling. dvb.caller.parameters gives you the arguments that were passed to the Xlet if it was started by another app using the application listing and launching API - if it was started in the normal way then this is empty. A few more details about these is given in part 11.7.1.1 of the MHP spec.
This information should make it up on to my website sometime soon - I'm busy working on some OCAP tutorials at the moment, but once those are done I plan to revisit some of the MHP stuff and update/expand it.
Hope this helps,
Steve.

Similar Messages

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How to get the iphone serial number in application?

hello, everyone
i really want to konw how to get the iphone serial number in aplication ? As it's different from uniqueIdentifier ....
thank you

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

How to get the motherboard serial number?

Hi
i am writting an application which will encrypt the motherboards serialnumber and other info to do an activation of my application.
inevitably locking my program to a specific PC.
Does anyone know how i can get the motherboards serial number?
I tried the wmi but get so many errors like missing prototype and not declared.
I dont know when to start using the Windows Management Instrumentation with regards to Lab windows/CVI.
Can anyone help me?
Thanks
Shako
Help share your knowlegde

I made up a small example that shows how to use WMI in CVI.
Unfortunately, I tested it on two systems (Win XP and Win7) and the serial number that can be retrieved in System Enclosure (that should be the S/N assigned by the PC producer) is always blank.
I will try to locate additional infos on this matter, in the meanwhile you may want to experiment with the example and search for other available infos (like for example OS or disk s/n) to create your own security system.
The example can be found here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to get the right Serial Number during Pick Release

Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
A problem is occurring during the Pick Release process. Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released. The hook works and the Pick Release process picks the correct (specified) serial number. However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook. This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number. Has anyone else encountered this same issue?
An example:
Item ABC123
Serial SER001 – Lot LOT001
Serial SER002 – Lot LOT002
Serial SER003 – Lot LOT003
Item ABC123 is being pick released.
The customised hook provides the Pick Release process with serial SER002.
The Pick Release process correctly uses SER002, but chooses lot LOT001.
thanks!
Francisco

Hi,
I guess you have added the code at slightly different place.
Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
Thanks,
Hrishi

How to get the card serial number while installing applet

I understand that I can retreive the card serial number from CPLC data. The getCPLCData () requires APDU objects in which it is not available at installation time.
Does anyone suggust to me how to retrieve serial number while applet installation?

while INSTALL is running?
I guess there is no way to do this...

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

How do I go about getting the product serial number to register my product as well as install my product. I bought it with a product box. On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid. When I tried to type this in for registration, it does register as this numbers also contain letters in it. Apparently the registration boxes accept numbers only. What do I do with a useless product for which I have paid good money for it?????

This is the simple solution which was offered to me when I tried to get the serial code on line.
The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
I is really frustrating, spending the last two hours trying to get my product going....

I have lose my iphone4 box and my i phone4 is freez how i get my iphone serial no

i have lose my iphone4 box and my i phone4 is freez how i get my iphone serial no

Sorry duh. You said your phone is frozen. Sorry cant help. Did you try pressing and holding both the sleep and home buttons at the same time for 20 seconds? That sometimes is all you need to do to unfreeze the phone. Make sure it's charged fully too.

HT4061 My ipad was stolen, i would like to ask how to get the IMEI using the serial number DL*******FJ1.

my ipad 2 was stolen last january 7, 2013. i want to know how to get the IMEI. unfortunately i was not able to connect it to my pc even once. but i can tract my ipad using my find my iphone in icloud. the serial no is DL*******FJ1.

Do you have the original retail box the tablet came in? If so its where the barcode is located, ideally labeled as the IMEI.

I have a 10.2.8 os. I had opened up the AOL logo on the bottom bar. Two aol boxes came up. I can get them to go away for a short time and then they come back. I have not used AOL for 6 years. How can I get the boxes to go away?

I have a 10.2.8 os on a G4 desktop. A week ago I clicked on the AOL icon in the bottom bar. I have not used AOL for six years. Two aol boxes came up. I can not get the boxes to go away for long. They may go away for 15 minutes and they come back while I am working. How can I get these aol boxes to go away?
I will be upgading to Tiger; 10.4.

Right click on the AOL icon and select move to trash.

What information do I need to send in my IPod touch to be replaced and how do i get the box to ship it in

What info do i need to send in my ipod touch to be replaced (i still have the 1 year warranty) and how do i get the box to ship it in also I have no clue what the address is please help

The instructions on how to obtain warranty work is covered here:
Apple - Support - iPod - Service FAQ

How to get the Save dialouge box in SAP Business One

Hi,
How to get the Save dialouge box in Button click event in SAP Business One.
Thanks,
Y.

Hello,
You would like to display an SaveFileDialog box?
may follow this thread, and you can find a sourcecode in vb.net and c# inside (for open dialog, but it is the similar...)
Regards
János

In iphoto how to get the gold you delete a photo warning message when you check the box not ask

in iphoto how to get the gold you delete a photo warning message when you check the box not ask

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

How to get the serial Numbers issued for an STO

Hi,
I created my own STO and mapped a serialised material for the same using transaction. I increased the stock by issuing serial numbers. The /SYCLO/MM_DOPURCHASEORDER_GET BAPI returns the PO header, item and longtext details. I want the serial numbers which are issued to the STO and the list of serial numbers for which the receipts has been done.
I want to know how to get the serial numbers which are issued to the STO throught the standard function module. I want only the issued serial numbers not the one for which the receipts has been done.
I tried using the standard BAPI, "BAPI_PO_GETDETAIL1" to get the serial number collection. But the FM is not returning the issued serial number as well as the list of serial numbers for which the receipts has been done. It is returning only the PO history in which the list of document number are present.
Thanks in Advance,
Mohan.

Hi,
Using the transaction "MB1C" and movement type "561", I filled the required details such as Material Number, Quantity, Storage Location and Batch. After filling all these details, when I press enter, it will ask for me to enter the serial numbers equal to the quantity specified. I entered the serial numbers by selecting the available serial numbers for that particular material by pressing F4 help.
Please let me know if you need any more inputs in this regards.
Thanks,
Mohan.

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

Hi ,
Could you please tell me form where did you purchase the Student version of Acrobat ?Is it through Adobe or some outside vendor ?
Is it the first time you are trying to access it ?
If yes ,then you must have received your serial number along with your product .
If not ,then how how did you manage to get your serial number and access Acrobat before ?
Regards
Sukrit Dhingra

How to get the BOX Serial No.

Similar Messages

Maybe you are looking for