How to get the change mode option for the line items in SC

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

Similar Messages

How to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7

how to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7 ? Is it on the basic driver? or do you have to install some other software?
jane

You have to install the rest of the software(s) for the sound card. The software is (if it is with the installation CD, though) called "Creative Smart Recorder" or something like that.

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

How to maintain open change request control for the transaction MM02 & CS02

hi all...
can any one please let me know that, is there any BADI or Enhancement spot
where i can code for my desired functionality...
how to maintain open change request control for the transaction MM02 and CS02.
Desired Functionality:
The user wants to maintain a material, bill of material or a document.
On the initial screen of the respective transaction (MM02, CS02)
user enters a change request number.
The system checks whether the object record that the user wants to maintain
is already assigned to other change request numbers.
If this is the case, the system displays a warning, stating that there are
other open change requests for this master data record.
In addition, the system lists the relevant change request numbers.
The user can continue the maintenance or leave the transaction and first check
the mentioned change requests.

hi satish thanks for reverting back
but sorry yaar given enhancement is not triggering...
but my requirement is:
- after executing the transaction MM02 & CS02.
- user inputs the data for Material Number and then he enters the Change Number.
- if the given Change Number is not maintained with the Material (i dont no
where/how this two fields are maintained internally), then it has to raise a
warning and it should list the existing Change Numbers for that perticular
Material.

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

Can we disable the anti-alias option for the quick selection tool?

Can we disable the anti-alias option for the quick selection tool?
I can deselect it with the magic wand but not with the quick selection. Any ideas?
thanks,
Dominik

I don't think you can, but in the refine edge dialog you can use the contrast setting to get rid of most of the anti-alias.
MTSTUNER

When will Apple give the Battery Percentage option for the iPod?

When will Apple give the Battery Percentage option for the iPod?

It's hard to tell since Apple has never included it in all generations of the iPod and I assume you mean the iPod Touch.
Apple could place it in the sixth generation iPod Touch but Apple has been pretty tight lipped on the possiblity of one coming. It's been since 2012 when the fifth generation arrived in the fall so the iPod lineup is due for an upgrade. Some reports say it won't come this year and others say different. But with the new iPhone expected to debut with larger screen it is still possible the new iPod will come with a larger screen alongside the new iPhone. It happened back in 2012.
But no one really knows. Until then download an app to measure your battery percentage. I have battery doctor and it's really useful to determine how much battery my iPod has left and it also can clean up your memory and any junk files.

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

How to get correct opening blance data for the quarterly report in BOFC?

Hi all,
I have a problem with getting the opening balance for the quarterly report.
i would like to keep the beggining balance data for the end of previouse year. (eg: now is 2010, then keep the begginig balance at Dec.2009 for each quarterly reporrt through the year in 2009).
however, for example in the second quarter, if i choose the beggining balance of Dec.2009 in the Consolidation definition, there is a problem that consolidation FS does not include the manual journal entry that ive entered at the first quarter such as goodwill.
Do I need to make manual journal entry at all the quarterly reporting period if I want to set the beggining balance for the previouse year end?
Could somebody please tell me how to remediate to this issue?
Or how do you manage with the opening balance in BOFC?
Thanks & Regards,
Hitomi

Hi Michael,
HRMS appliocation
database 10.2.0.4
windows XP
ebs 11.5.10.2
One of our user using disooverer 4i desktop and administration edition on old windows 2000 machine and connecting to schema.
We are decommision old windows 2000 machine.
I have installed disooverer 4i desktop and administration edition on new windows XP VM box and trying to connect to same schema which was used with old
desktop and asking me to create EUL. What is theat I should be doing to use new one same as old one?
Old box is still there.
Thanks.

How to get standard view or table for the standard inforsource

Hi all:
According to business reqirement, we are going to use standard inforsource 0CO_OM_CCA_10,
we need to know the standard view or table in order to corresponding DataSource?
could you please tell me how to get the standard view or table or DataSource?
Couldn't thank you more!

Hi Sony,
Goto RSA1>BI content installation>goto objects>double click on the Infosource>then a pop-up comes search for that infosource-->select it and click on transfer
Before that in the right side of the tab select the grouping as "Before and afterwards of the dataflow" and collection as automatic.
then you get all the datasource/cubes and all the object related to the infosource.
OR another option is-->
Goto RSA6 in the R/3 and search for the datasource with the name "0CO_OM_CCA_10" (don't forget to expand all the tree structure in RSA6)
then goto that datasource and double click on the datasource then you will get the Extract structure of that datasource.
double click on the extract structure then you may get the View name also.
hope this helps...
Regards,
Ravi Kanth

How to get rid of error message for the material?

Hi everybody,there is a material which is showing an error message whenevr try to create a sales order, i've checked the material master...there is no check in X-plant Mtrl or X-dist chan or any flag for deletion...but still the red error message comes up while creating a sales order...how to get rid of this error?

this means material is blocked for procurment
three kinds of block can be there
01 Blocked for procment/whse
02 Blocked for task list/BOM
03 Blocked for Purchasing
GOTO MM42 give material n plant data
Select BESIC VIEW
there is a field called as material block remove the blocking reason
Hope this will help
Edited by: WISH on Mar 24, 2008 6:33 AM

How to get denomination of Notes ? for the amount paid

Dear Freinds
i have requirement where the total amount obtained by a employee through Cash . They wanted to have denomination
for the amount paid ito that employee
ex : An X employee got RS.5550 rupees as cash. They wanted to know how much money has been paid in Denomination
of 10 Rupee notes,20 Rupee notes,50 Rupee notes,100 Rupee note,500 Rupee note & 1000 Rupee notes.
so the data has to be displayed should be
since the employee is gettign 5550 --> it has to 1000*5 --> Five Thousand rupees notes --- 5 count should come
500 will be paid as ---> 500 * 1 -
Five hudress count is 1
50 is the balance -
it will be paid as fivty note -- Count is 1.
so i have to get 5000------ count 5 , 500 count 1,50 count 1. Can any one go this type of denomination doing code please
let me know how to proceed.
Regards
divya
Edited by: Divya Kumari on Jul 8, 2011 2:18 PM

Actually
the scenario is that in some employees ( if you go employee subgroup) like daily labour and casual labours will be paid
on daily bais for them they will not be paid to bank . I n that case those type of employees will be paid by CASH. So in teh month end the company wanted to knwo what type and how much money paid .
regards
divya

How to get total number of products for the site?

Hi,
I want to know the total number of products available for the site. i checked in the dcs_product table, it shows 40849 unique products. is this the total number of products count which are used in the site?
I have another table in CATA schema dcs_product_sites, when i run the CatalogMaintenanceService to populate the records in this table, getting only 26000 products. Please let me know why this difference when i run the service.
Thanks

dcs_product table gives all products in your catalog.
dcs_product_site will give products for a particular site.
If you have more than one site, then you need to query for that particular site.
And the number of products you show also depends upon the start and end date on the products.
And also some custom filters you have like Out of stock items etc.
Peace
Shaik

How to get the change mode option for the line items in SC

Similar Messages

Maybe you are looking for