How to get The Collabration Admin Menu
Hi All,
Please Any one can tell me how to get Collabration Admin menu in Netweaver like How we get System Administration , Content Administration and User Administration
I want to create E-Mail Transport in the Groupware Admin Document they have given that i have to go through the following link
To configure an e-mail transport, choose Collaboration Administration ¨ Collaboration
Content ¨ Configure Groupware Transport ¨ Mail Transport from the top-level navigation
bar.
But I am not able to find the Collabaration Admin Menu when i looged in with my user id whcich is assigned with superadmin role.
Can any one help me out
Thanks and Regards
Prasad.Y
Hi Prasad,
To get all these admin. iViews u should have assigned the "Administrator" role(superadmin role is different) to ur userid and that can be assigned by only Administrator.
After gaining the access u have to create System for mail server.
Then navigate to
System Admin.->System Configuration->Knowledge Management->Collaboration->Groupware Transports ->Mail Transport.
Fill in the parameters i.e. the ip of the mail server and the name of the folder where you want the sent messages to be stored and the name of the system created in step 1 in the system alias field.
Restart the J2ee engine for the changes to take effect.
With best regards,
Amol.
Similar Messages
-
How to get The Collbration Admin menu in EP of Netweaver
Hi All,
Please Any one can tell me how to get Collabration Admin menu in Netweaver like How we get System Administration , Content Administration and User Administration
I want to create E-Mail Transport in the Groupware Admin Document they have given that i have to go through the following link
To configure an e-mail transport, choose Collaboration Administration ¨ Collaboration
Content ¨ Configure Groupware Transport ¨ Mail Transport from the top-level navigation
bar.
But I am not able to find the Collabaration Admin Menu when i looged in with my user id whcich is assigned with superadmin role.
Can any one help me out
Thanks and Regards
Prasad.YHi Prasad, i have a user that have the followin roles:
-content_admin_role
-super_admin_role
And that user have the 'System Administration' tab in the top level navigation.
try with these roles to access:
System Administration > System Configuration > Collaboration > Groupware Transports > Mail Transport
I hope it helps u.
regards
Gregory. -
When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto. All other print requests show the normal pinter menu. How do get the normal print menu?
Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated. -
I am stuck. I can not figure out how to get the microsoft office that is on my (admin) profile dock onto the dock for the other users on my mac. Can anyone help me out?
ebony --
So, when you open your main Applications folder, there is no Office app there?
It's in your Users>Applications folder? -
Working in muse when I go to right click I don't get the Page Properties menu how do I change ?
Working in muse when I go to right click I don't get the Page Properties menu how do I change this ?
Hello,
What do you right click on? Usually you should be able to see Page Properties when you right click on a page from the plan mode, or you can also find page properties if you open the individual pages and then go to Page -> Page Properties. However, if you are in the plan mode and you try to use the Page -> Page Properties, that won't work and the "Page Properties" option would be grayed out.
Hope this helps.
Cheers
Parikshit -
How to get the table of value field? and can we expand the technical limits
Dear
I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
We have a note for R.4.x Please see below:
OSS note 160892
You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
David Sun
Regards!how to extend the limit of value numbers? please see the original question.
-
How to get the selected rows & columns in the table?
hi everybody,
In my application the table is kept inside the event structure.I select the cells in the table (using mouse) on running time.How to get the selected number of rows & columns in that table?Hello,
You can fill selected values of the table by writing to it or the corresponding property using a property node - the table is just a 2D array of strings. I think for your "disable" question you are referring to the shortcut menu (when you right click). If you are using LabVIEW 8.x, you can edit or disable that shortcut menu - just right click on your table at edit time and choose Advanced >> Run-Time Shortcut Menu.
Best Regards,
JLS
Best,
JLS
Sixclear -
How to get the SR NO in a report
Hi all,
I am new to report and was wondering how I get the
SrNO in a report like below example.
SrNO Name Dept
1 ABC Sales
2 xyz Admin
Should i use CF or CP etc ???
Regards
SunnyIf it is a tabular report, then use rownum in your
query and display it in the report
e.g.
SELECT ROWNUM, EMP.EMPNO, EMP.DEPTNO
FROM EMP
If group report, then use a summary column (count) in
the detail group and reset on master group.
Hope this helps.Thanks a Million.!!!
Sunny -
I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?
Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). -
How to get the value from another report Customizes Form
Dear all,
I create a report such as
select * from mytable.table1
where field1 = :bind_variable
I create a menu to run this Customized Form and user have to select the bind_variable values. So I have another report created which also want this bind_variable as it WHERE Clause. But I don't want my user to key the same bind variable twice. They can just same the Customized Form and run for both report.
Could anybody know how to get the bind_variable on 1st report and used by the 2nd report.
Thank you very much.
Best Rgds,
SL VoonHi,
are you on BI7.0? There you can create variables type replacement path and get the value out from a different variable without any coding.
regards
Cornelia -
How to get the selected value in SelectOneMenu in backing bean
Hello all,
I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select menu to populate the second menu's item list. Basically I need to access to the UI Component of the first select Menu and retrieve its selected value.
Could you help me out?
Thank you very much in advance,
LngoHi Lingo,
There r two ways of getting the values into the list. First one is hardcoding the values and the second one is use the list and get the values into the list by firing a query in the database.
Inorder to display the values in the second menu based on the first onces selection we need to add an attribute to the first selectonemenu known as valueChangeListener and we need to sumit the page.
Here is the sample code
<h:selectOneMenu id="catalogue"
binding="#{urbean.catalogue}" onchange="submit()"
valueChangeListener="#{urbean.categoryValueChange}"
<f:selectItem itemLabel="Select Catalogue" itemValue="" />
<f:selectItems value="#{urbean.catalogueList}" />
</h:selectOneMenu>
<h:selectOneMenu id="category"
binding="#{urbean.category}"> <f:selectItem itemLabel="Select Category" itemValue="" />
<f:selectItems value="#{urbean.categoryList}" />
< </h:selectOneMenu>
now in method called by valuechangelistener we need to write the similar code
public void categoryValueChange(ValueChangeEvent event) {
String rfnum = (String) event.getNewValue();
List categoryList = new ArrayList();
List tempList = new TablenameDAO().getActiveCatByCatalogueID(rfnum);
for (int i = 0; i < tempList.size(); i++) {
Tablename tablename = (Tablename ) tempList.get(i);
String value = "" + tablename .getrfnum();
String label = tablename .getname();
if (label == null) {
label = "";
SelectItem item = new SelectItem(value, label);
categoryList.add(item);
bean.setCategoryList(categoryList);
///getActiveCatByCatalogueID (rfnum) should bring the records which r based on the rfnum
if u follow this process i am damsure that u will get the values in to the secondlist based upon the first list
Thanks & Regards
Manidhar -
How to get the role name in which query is published ?
Hi Experts,
Is there any table where i can get the name of the role in which a particular query is published. I know that if i have a role , i can check in pfcg giving that role name and in menu tab i can see all the queries published under that role. But if i know query but not role how to get the role name . Is there any table or functon modules or programs to get the information.
Thanks & Regards
Vamsi KiranCheck this table
AGR_HIER -
How to get the list of icc profile,which Photoshop loaded?
I am developing a automation plugin,but I do not know how to get the list of icc profile,which photoshop loaded.
I have read the log of "getter" and "Listener",and not find the way to get the list.Thank you for you answer.
I find a icc profile has a "internal name" which show in the color setting menu in photoshop and a "external name" which is the file name. And the "internal name" maybe different with "external name".
How I can get the "internal name" from the icc profile? I do not find the information in the ICC Profile Format Specification.
Thank you very much! -
How to get the type of user role in ISF?
We have functionality to hide all the buttons on Monitor task, which was successfully achieved by javascript. But we need to enable these buttons for only Site Administrators, so that they only can do necessary modifications upon request from end users. Can someone point me to correct direction how to get the user role when a user is not a Site Administrator. Thanks in advance.
What about having your custom ISF onload script first run a db query (on older version called a rcFetch) which would evaluate if the person loading form is a member of the site admin ou.
Here's a rough example:
ISF_onLoad()
rcFetch('Q1','Q1PL=' + UserID);
This will then run a query to validate if the person is a member of the admin ou.
SELECT * FROM DirOrganizationUnitPeople WHERE PersonID = #P1# AND OrganizationalUnitID = 1 (this should be the id of the site admin ou or the ou which you are referring to as an admin)
then have a call back to determine if any records where return, which indicate the person is a member of the site admin ou.
function Q81_DataCallback(retArray, queryList)
if (retArray['Q8500._COUNT_'] == 1)
{ *Show the fields* }
Hope this helps. -
In iphoto how to get the gold you delete a photo warning message when you check the box not ask
in iphoto how to get the gold you delete a photo warning message when you check the box not ask
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Maybe you are looking for
-
How to backup and restore postgres, How to backup and restore postgres
Hi! Yesterday I had a major hickup while trying to configure some OD stuff. Since I was still setting up Lion Server, I just decided to go back and restore the system using a Time Machine backup from a few hours earlier. Went well... except that anyt
-
Hi All, We are trying to override existing OOTB method through our custom component but system is calling the OOTB method only. Below are the ways we tried to call our custom component method, request you to advice us where we are making mistake. Pro
-
Brief delay sending messages with spinning wheel
Using Lync 2013 clients, some users report brief delay with their message and notice spinning wheel for few seconds and then the message gets delivered successfully. This is only with few users who are local as well as remote, Trying to understand th
-
How do I deleter a keyword from a keyword collection?
When I remove the keyword from all clips, it still appears on the keyword collection list under the event in the event list in the left hand column. How can I get delete the keyword entirely from the list of keywords. Thanks in advance for the help.
-
The full message reads as, " Force Quit Applications Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files fr