How to get the count monthly wise

Hi All
I have lot of order dispatched in a year 2010, how to get the moth wise total.
For example jan 1000 orders ,feb 2500 orders.
Thanks & Regards
Srikkanth.M

Pleiadian wrote:
Maybe even
b.schedule_ship_date between to_date('2010','YYYY') and to_date('2011','YYYY');)But this could return schedule ship dates that are 01-Jan-2011 00:00:00. I don't think this is wanted since it was not specified in the original requirement. I'm not even sure if to_date('2010','YYYY') returns 01. Feb.2010 in a few days (when we will have february).
Just checking the docs....
found it: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm#SQLRF51062
from the docs:
If you specify a date value without a time component, then the default time is midnight (00:00:00 or 12:00:00 for 24-hour and 12-hour clock time, respectively). If you specify a date value without a date, then the default date is the first day of the current month.Just to be on the safe side always give the complete format mask!
b.schedule_ship_date >= to_date('01012010','DDMMYYYY')
and b.schedule_ship_date < to_date('01012011','DDMMYYYY')Edited by: Sven W. on Jan 17, 2011 5:14 PM

Similar Messages

How to get the current month number

Hi everyone,
Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
Is there anyway to get the current month value in number? Thanks

Scott,
Thank you so much! It works perfectly! :)
Hope you have a great day ahead!
Cheers,
Angeline

How to Get the current month at timezone UTC-10

Hi All,
   can you please let me know How to Get the current month at timezone UTC-10.
Function module ? which date and time needs to pass.

Hi,
Try with following code.
DATA zdate TYPE D.
DATA ztime TYPE T.
                  CALL FUNCTION 'ISU_DATE_TIME_CONVERT_TIMEZONE'
                    EXPORTING
                      x_date_utc          = sy-datum
                      x_time_utc          = sy-uzeit
                      x_timezone          = 'UTC-10'
                   IMPORTING
                     Y_DATE_LCL          = zdate
                     Y_TIME_LCL          = ztime
                   EXCEPTIONS
                     GENERAL_FAULT       = 1
                     OTHERS              = 2.
                  IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                  ENDIF.
WRITE : zdate, / ztime.
Thank you,
Sekhar.

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to get the currrent month and year from a new date object

If I create a new Date object as "d",
java.util.Date d = new java.util.Date();how can I format the date to get the current Month as 'Jan' and the current year as '2008'. So if I have something like d.getMonth() gets the current month as 'Oct' and d.getYear() gets '2008'
Thanks,
Zub

[Read the flamin' manual you must. Hmm.|http://en.wikipedia.org/wiki/RTFM]
~~ Yoda.
Well no actually, he didn't say that, but he should have.
Cheers. Keith.
PS: Don't say that to a 7 foot pissedOff wookie when he's got his head stuck in a smoking hyperdrive, and you're being chased by a S-class battle cruiser... Ask Yoda how he got to be so short.
PPS: It is the SimpleDateFormat you seek ;-)
Edited by: corlettk on 14/10/2008 22:37 ~~ Also far to slow... but funny.

How to get the count of repeating elements in a xml doc.

In many xml documents, in is common to have repeating child elements and what I would like to know is how do I determine exactly how many of these child elements exist in a particular document. There is probably a correct XPath string to determine this, but I cannot figure out what it is. Here is an example
<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>
The above 'c' element is what varies in number from document to document and I need to know how to get the number of 'c' elements for the document, which would be 3 in the above case.

create table test_xml(data xmltype)
insert into test_xml values(
xmltype('<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>')
select extract(data, '/a/b/c').getclobval() from test_xml
select count(*) from test_xml
where existsnode(data, '/a/b/c')=1
good luck.

Select Count(*) from Sample_table - how to get the count using JDBC?

Hi All,
It would be glad if anyone could help me with this. The problem is that I have to get the 'count' of records selected from a arbitrary table say, 'sample_table'. Is that possible to form the SQL in JDBC as
Select Count(*) from Sample_table
and get the value of the count? If yes, how?
Thanks in advance
Prabz

stmt = con.createStatement();
ResultSet recordcnt_rs = stmt.executeQuery("Select Count (*) as record_ctr From Sample_table");
recordcnt_rs.next();
record_ctr = recordcnt_rs.getInt("record_ctr");
hope this helps.

How to get the count of each minutes

Oracle 10 DB
Hi All
I using this query to get the count of records fetched by the concurrent program per min,
select count (distinct b.attribute2)
from oe_order_headers_all a,oe_order_lines_all b
where a.header_id=b.header_id
and b.flow_status_code ='AWAIT_QUINTIQ_BOOK'
and to_Char(b.last_update_date,'DD-MON-YYYY HH24:MI:SS') between '19-JAN-2011 02:00:01' AND
'19-JAN-2011 02:00:02'
This is used to get the count of records fetched at one mins
How to find the count of last 10 mins ie 1 mins count 2.00 to 2.10
Thanks & Regards
Srikkanth.M

Try this:
SELECT TRUNC(b.last_update_date, 'mi') time_mins, COUNT(DISTINCT b.attribute2)
FROM   oe_order_headers_all a,
       oe_order_lines_all b
WHERE a.header_id = b.header_id
AND    b.flow_status_code = 'AWAIT_QUINTIQ_BOOK'
AND    b.last_update_date >= to_date('19/01/2011 02:00:00', 'dd/mm/yyyy hh24:mi:ss')
AND    b.last_update_date < to_date('19/01/2011 02:10:00', 'dd/mm/yyyy hh24:mi:ss')
GROUP BY TRUNC(b.last_update_date, 'mi');I'm not sure why you're bothering with the join to the oe_order_headers_all table, since you're not referencing that in the where clause or the selected columns list. I think you could probably do away with it.
I've changed your code to take the last_update_date and truncate it to the minute level, and added that as a column, so you can see which count goes with which minute. Obviously, this has to be in the group by.
I've also changed your date comparisons so that you're actually comparing dates to dates, rather than strings to strings - why would you deliberately take information away from the optimizer? Oracle does not treat strings the same as dates, and forcing it to use strings rather than dates could lead you to have a vastly differing execution path, which will most likely be less performant.
Not to mention, coding like that leads you to assume that you can compare dates in strings without any problems, and that is just not the case. '19-FEB-2011' is counted as being earlier than '19-JAN-2008', as strings sort alphabetically.

How to get the count of PO'S raised by a user

Hi,
I have a new requirement whr i am asked to get the count of number of PO'S raised by a particular user in report. Suppose the user raised 10 purchase orders .
The requirement is when a user name is given it has to give count of 10.
Where shud i include this,in rows or columns. Please suggest.
Thanks&Regards,
Praveen

Hi Praveen,
take a look in www.service.sap.com/bi, under old release, for release 2.x you will find an How to that detail how to count occurencies of a Char. Maybe you will find here the solution.
Ciao.
Riccardo.

How to get the Count of a logic?

Hi,
Very new to CRM. I am trying to get the count of "activity start time" that are greater than current time stamp. Count(activity start time) work. I don't know how to add the time stamp condition to this. I can't add this condition as filter.
Appreciate any responses.
Thanks

Raghu,
Thanks for the help. It works to get the count.
The problem is, i have some other filters set and can't combine this filter. Here is my scenario:
get all activities on a contact that have greater than x $ amount as assets. I need to find the number of future appointments for that contact and start time of first pending future appointment. All has to be in one report.
My columns are for example : contact name, activity start time, end time, subject, next pending appointment start time, total future appointments, some other related fields from contact
So when I add the filter that you had given, it will not give me all activities. I am able to achieve all this in seperate reports and unnable to get it in single one.
Thanks,
GiGi

How to get the first month of the year inputed by user manually

Hi Expert,
Just like the subject, I 'd like to get the first month of the year inputed by user manually, but don't know how to set the variable, please help.
For example, user execute a query and input the value of variable Year = 2010, and what I want to get is 201001 into another variable, so that I can use this variable to setup another selection.
Thank you.
Andy

Hi Andy,
1) U will create a user input varaible for year and say it is ZYEAR.
2) U will create another variable for calmonth which has processing type : customer exit ..single value ...mandatory ....say ZCMONTH.
This needs to be populated using the year( user inputted ) and calmonth '001'
This code will fetch the user input value into ZYEAR and append '001' to the user input value and the value
will be passed to the ZCMONTH varaible...
Sample Code is....
When 'ZCMONTH'.
IF I_STEP = 2.
     READ TABLE I_T_VAR_RANGE WITH KEY VNAM = 'ZYEAR'.
     IF SY_SUBRC = 0.
                L_S_RANGE-LOW = I_T_VAR_RANGE-LOW.
               L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-SIGN = 'I'.
             L_S_RANGE-OPT = 'EQ'.
                  APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
ENDIF.
Regards
vamsi

How to get the current month for a variable based on info object 0FISCPER3

Hie Gurus
I am working on the financial reports i am failing to derive the Current month from the variable based on infobject 0FISCPER3 PERIOD .
I would also like to get the same month from the prevoius year. Any ideas?

If I understood correctly, you need in your repot
Current Month Plan This year || YTD Plan This Year || Current Month Plan Last Year || YTD Plan Last Year
Your variable 0I_FISCPER3 must be on the object 0FISCPER3 which is nothing but just the Fiscal Period. This variable is a user entry mandatory Interval variable.
if you are entering a range in the input screen for this variable, you will get cumulative values. If you just need to get the value for a month in first column your report, you will have to create another variable of type Customer Exit which will read the "To value" entered for the variable 0I_FISCPER3 and columns for Current Month should be restricted on this variable.
if you are entering a single value in the selection screen of this variable, current month column should be restricted on this variable with "Equal To" operation and YTD colmns should be restricted to "Less Than Equal to" operator with this variable.
0FISCPER3 just have posting period and not year, so you will have to use varialbes for 0FISCYEAR separately.
Please let us know if it helps or if you are using some other variable based on 0FISCPER3 or 0FISCPER.
Regards,
Gaurav

How to get the count of distinct customer in matrix?

Hi,
I want to get the count of distinct customer in matrix at the time of validation event.
Thanks Regards,

Hi,
Please close the thread.by marking the correct answer
regards,
Prasad

How to get the count of customers

Hi all,
We have a fact table, AR_F to which the dimensions Party_D and Fin_D are connected. Party-org_d is inturn connected to Party_d.
party_org_D contains details of customers like Customer name and customer ID (Number)
Fin_D contains ratings (Both -ve and +ve) of each customer.
the rating range is as follows,
good rating : >0
OK Rating: Between 0 and -1.5
Bad Rating: <-1.5
Now i need to get the count of all customers falling in each range as separate measures.
Kindly help me get a solution for this.
Thank you.

Hi,
Try this....
col 1
case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end
col 2
case when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Good' then count(customer_id)
when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Ok' then count(customer_id)
when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Bad' then count(customer_id)
end
hope helps........

How to get the count of all the entries in the DB?

I want to know the way getting the count of the entries in a DB. Not using cursor to visit all entries and record the count.
Message was edited by:
user633842

Hello,
Yes, depending on the type of database you are using, the
following statistics from DB->stat, look like what you want.
For Hash databases:
hash_ndata;
The number of key/data pairs in the database. I
For Btree databases:
bt_ndata;
For the Btree Access Method, the number of key/data pairs
in the database.
For the Recno Access Method, the number of records in
the database.
For Queue databases:
qs_ndata;
The number of records in the database.
Additional details are at:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_stat.html
Thanks,
Sandra

How to get the count monthly wise

Similar Messages

Maybe you are looking for