How to get the count of distinct customer in matrix?

Hi,
I want to get the count of distinct customer in matrix at the time of validation event.
Thanks Regards,

Hi,
Please close the thread.by marking the correct answer
regards,
Prasad

Similar Messages

Getting the count of DISTINCT of several columns

How can i get the count of DISTINCT of several columns?
SQL> select count(distinct ename) from emp;
COUNT(DISTINCTENAME)
14
SQL> select count(distinct ename, job) from emp;
select count(distinct ename, job) from emp
ERROR at line 1:
ORA-00909: invalid number of arguments

Hello,
You should separate them out like this
select count(distinct ename), count(distinct job) from emp;Regards

*** How to get the username in a custom password change routine....

How to get the username in a custom password change routine / procedure / form when a user's password has expired and is redirected automatically to this custom program?
We use the 2nd parameter in LOGIN_URL column in WWSSO_LS_CONFIGURATION_INFO$ table to get to this custom change-password proc.

OK !
Use that maybe good :
select USERID into v_user from sys.aud$
where ntimestamp#=(
select max(ntimestamp#)
from sys.aud$ );

How to get the count of each minutes

Oracle 10 DB
Hi All
I using this query to get the count of records fetched by the concurrent program per min,
select count (distinct b.attribute2)
from oe_order_headers_all a,oe_order_lines_all b
where a.header_id=b.header_id
and b.flow_status_code ='AWAIT_QUINTIQ_BOOK'
and to_Char(b.last_update_date,'DD-MON-YYYY HH24:MI:SS') between '19-JAN-2011 02:00:01' AND
'19-JAN-2011 02:00:02'
This is used to get the count of records fetched at one mins
How to find the count of last 10 mins ie 1 mins count 2.00 to 2.10
Thanks & Regards
Srikkanth.M

Try this:
SELECT TRUNC(b.last_update_date, 'mi') time_mins, COUNT(DISTINCT b.attribute2)
FROM   oe_order_headers_all a,
       oe_order_lines_all b
WHERE a.header_id = b.header_id
AND    b.flow_status_code = 'AWAIT_QUINTIQ_BOOK'
AND    b.last_update_date >= to_date('19/01/2011 02:00:00', 'dd/mm/yyyy hh24:mi:ss')
AND    b.last_update_date < to_date('19/01/2011 02:10:00', 'dd/mm/yyyy hh24:mi:ss')
GROUP BY TRUNC(b.last_update_date, 'mi');I'm not sure why you're bothering with the join to the oe_order_headers_all table, since you're not referencing that in the where clause or the selected columns list. I think you could probably do away with it.
I've changed your code to take the last_update_date and truncate it to the minute level, and added that as a column, so you can see which count goes with which minute. Obviously, this has to be in the group by.
I've also changed your date comparisons so that you're actually comparing dates to dates, rather than strings to strings - why would you deliberately take information away from the optimizer? Oracle does not treat strings the same as dates, and forcing it to use strings rather than dates could lead you to have a vastly differing execution path, which will most likely be less performant.
Not to mention, coding like that leads you to assume that you can compare dates in strings without any problems, and that is just not the case. '19-FEB-2011' is counted as being earlier than '19-JAN-2008', as strings sort alphabetically.

How to get the caret inside a custom editor?

I was reading through old posts the other day and noticed this by Rob Camick in this thread Re: Problem in cell selection in JTable Java Swing :
camickr wrote:
All KeyEvents are passed to the editor for the cell and the editor is psuedo invoked. That is, the caret is not placed on the text field used as the editor, but the character typed is added to the editor.This set me thinking about a known issue in my app which I had shelved for a "rainy day": how to get the caret into the cell editor component. I thought I'd get it out and look at it. I tried the following, in my custom cell editor:
public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected,
                                             int row, int column)
    JTextField ec = (JTextField) editorComponent;
    ec.setText((String) value);
    if ("".equals(ec.getText()))
      ec.setCaretPosition(0);
    else
      ec.selectAll();
    return editorComponent;
}But it has no effect whatsoever, the user still can't type something in and then press the backspace key to useful effect. Has anyone out there solved this problem? (And why, oh why, is the caret not put into the cell editor by default, if it's a component that has a caret?)

Replying to my own post, in case what I ended up with is of some help to others. The desired behaviour was that anything the cell contained from the previous edit would be replaced by what the user types in the current edit, i.e.:
user starts edit, types 234, stops editing, cell displays 234...user single-clicks on cell, types 567, stops editing, cell displays 567
My code is as follows:
    public Component getTableCellEditorComponent(JTable table, Object value,
                                                 boolean isSelected, int row,
                                                 int column)
      final JTextField ec = (JTextField) editorComponent;
      ec.setText((String) value);
      // selectAll, so that whatever the user types replaces what we just put there
      ec.selectAll();
      SwingUtilities.invokeLater(new Runnable()
        public void run()
          // make the component take the keyboard focus, so the backspace key works
          ec.requestFocus();
          SwingUtilities.invokeLater(new Runnable()
            public void run()
              // at this point the user has typed something into the cell and we
              // want the caret to be AFTER that character, so that the next one
              // comes in on the RHS
              ec.setCaretPosition(ec.getText().length());
      return editorComponent;
    }

How to get the count of repeating elements in a xml doc.

In many xml documents, in is common to have repeating child elements and what I would like to know is how do I determine exactly how many of these child elements exist in a particular document. There is probably a correct XPath string to determine this, but I cannot figure out what it is. Here is an example
<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>
The above 'c' element is what varies in number from document to document and I need to know how to get the number of 'c' elements for the document, which would be 3 in the above case.

create table test_xml(data xmltype)
insert into test_xml values(
xmltype('<a>
<b>
<c>1</c>
<c>5</c>
<c>22</c>
</b>
</a>')
select extract(data, '/a/b/c').getclobval() from test_xml
select count(*) from test_xml
where existsnode(data, '/a/b/c')=1
good luck.

Select Count(*) from Sample_table - how to get the count using JDBC?

Hi All,
It would be glad if anyone could help me with this. The problem is that I have to get the 'count' of records selected from a arbitrary table say, 'sample_table'. Is that possible to form the SQL in JDBC as
Select Count(*) from Sample_table
and get the value of the count? If yes, how?
Thanks in advance
Prabz

stmt = con.createStatement();
ResultSet recordcnt_rs = stmt.executeQuery("Select Count (*) as record_ctr From Sample_table");
recordcnt_rs.next();
record_ctr = recordcnt_rs.getInt("record_ctr");
hope this helps.

How to get the count of customers

Hi all,
We have a fact table, AR_F to which the dimensions Party_D and Fin_D are connected. Party-org_d is inturn connected to Party_d.
party_org_D contains details of customers like Customer name and customer ID (Number)
Fin_D contains ratings (Both -ve and +ve) of each customer.
the rating range is as follows,
good rating : >0
OK Rating: Between 0 and -1.5
Bad Rating: <-1.5
Now i need to get the count of all customers falling in each range as separate measures.
Kindly help me get a solution for this.
Thank you.

Hi,
Try this....
col 1
case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end
col 2
case when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Good' then count(customer_id)
when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Ok' then count(customer_id)
when (case when Fin_D.ratings > 0 then 'Good'
when Fin_D.ratings >= -1.5 and Fin_D.ratings <= 0 then 'Ok'
when Fin_D.ratings < -1.5 then 'Bad' end)='Bad' then count(customer_id)
end
hope helps........

How to get the count of PO'S raised by a user

Hi,
I have a new requirement whr i am asked to get the count of number of PO'S raised by a particular user in report. Suppose the user raised 10 purchase orders .
The requirement is when a user name is given it has to give count of 10.
Where shud i include this,in rows or columns. Please suggest.
Thanks&Regards,
Praveen

Hi Praveen,
take a look in www.service.sap.com/bi, under old release, for release 2.x you will find an How to that detail how to count occurencies of a Char. Maybe you will find here the solution.
Ciao.
Riccardo.

How to get the Count of a logic?

Hi,
Very new to CRM. I am trying to get the count of "activity start time" that are greater than current time stamp. Count(activity start time) work. I don't know how to add the time stamp condition to this. I can't add this condition as filter.
Appreciate any responses.
Thanks

Raghu,
Thanks for the help. It works to get the count.
The problem is, i have some other filters set and can't combine this filter. Here is my scenario:
get all activities on a contact that have greater than x $ amount as assets. I need to find the number of future appointments for that contact and start time of first pending future appointment. All has to be in one report.
My columns are for example : contact name, activity start time, end time, subject, next pending appointment start time, total future appointments, some other related fields from contact
So when I add the filter that you had given, it will not give me all activities. I am able to achieve all this in seperate reports and unnable to get it in single one.
Thanks,
GiGi

How to get the count of all the entries in the DB?

I want to know the way getting the count of the entries in a DB. Not using cursor to visit all entries and record the count.
Message was edited by:
user633842

Hello,
Yes, depending on the type of database you are using, the
following statistics from DB->stat, look like what you want.
For Hash databases:
hash_ndata;
The number of key/data pairs in the database. I
For Btree databases:
bt_ndata;
For the Btree Access Method, the number of key/data pairs
in the database.
For the Recno Access Method, the number of records in
the database.
For Queue databases:
qs_ndata;
The number of records in the database.
Additional details are at:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_stat.html
Thanks,
Sandra

How to get the count monthly wise

Hi All
I have lot of order dispatched in a year 2010, how to get the moth wise total.
For example jan 1000 orders ,feb 2500 orders.
Thanks & Regards
Srikkanth.M

Pleiadian wrote:
Maybe even
b.schedule_ship_date between to_date('2010','YYYY') and to_date('2011','YYYY');)But this could return schedule ship dates that are 01-Jan-2011 00:00:00. I don't think this is wanted since it was not specified in the original requirement. I'm not even sure if to_date('2010','YYYY') returns 01. Feb.2010 in a few days (when we will have february).
Just checking the docs....
found it: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements003.htm#SQLRF51062
from the docs:
If you specify a date value without a time component, then the default time is midnight (00:00:00 or 12:00:00 for 24-hour and 12-hour clock time, respectively). If you specify a date value without a date, then the default date is the first day of the current month.Just to be on the safe side always give the complete format mask!
b.schedule_ship_date >= to_date('01012010','DDMMYYYY')
and b.schedule_ship_date < to_date('01012011','DDMMYYYY')Edited by: Sven W. on Jan 17, 2011 5:14 PM

How to get the count of items(folders or documents) in a SharePoint document library and for a folder in any SharePoint document library?

I need to get a count of documents and folders in a selected document library(the item for EventRecievers for event deleting) and the count of documents in a selected folder(the item for EventRecievers for event deleting) to determine whether the item(document
library or folder) is empty or not, as I need to use this condition for one of my custom EventReceivers.
Can you please suggest me the code to do the same?

Hi.
Try this:
class Program
static void Main(string[] args)
using (SPSite site = new SPSite("http://z2012net"))
using (SPWeb web = site.OpenWeb())
SPList l = web.Lists["List001"];
List<FolderInfo> res = new List<FolderInfo>();
getListCount(l.RootFolder, ref res);
private static void getListCount(SPFolder sPFolder, ref List<FolderInfo> res)
SPQuery query = new SPQuery();
query.Folder = sPFolder;
res.Add(new FolderInfo() { ItemCount = sPFolder.ItemCount, Name = sPFolder.Name, Url = sPFolder.Url });
SPListItemCollection items = sPFolder.ParentWeb.Lists[sPFolder.ParentListId].GetItems(query);
foreach (SPListItem item in items)
if (item.FileSystemObjectType == SPFileSystemObjectType.Folder)
SPFolder f = sPFolder.ParentWeb.GetFolder(item.UniqueId);
getListCount(f, ref res);
class FolderInfo
public string Url { get; set; }
public string Name { get; set; }
public int ItemCount { get; set; }
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

How to get the count of the records

Hi all,
how can we get the record count after the read statement.Means if we write a read statement based on a condition,then how can we know that how many records get effected for this read statement

You can use loop statement to read the records and write in some internal table and after the end of the loop, you can use describe command to find the number of records.
For eg. DESCRIBE TABLE tablename LINES lines.
Here the "Lines" field will give the total number of records present in the table "tablename"

How to get the count property from the oData response

Hi,
I have a fullscreen view in my Fiori app where we call a oData service through table.bindItems() inside the controller.
The binding of items works fine but we have a situation when we need to display the total number of items (for e.g. 515) on the UI. We do not get this information from the VDM, so we plan to use the length property of the getList() method to determine the total number of items. But because of growing feature of the table it only reads 100 items at a time and the length property returns only 100. I have attached the listener attachRequestCompleted() for the model so that once the bindItems() request is complete i can get the length property. But my problem is that i want the total count.
I saw in the debug that when this table.bindItems() gets called it makes a oData service call and in the response i can see that there is a count property available which has the total number of items (515 for my e.g.) but how do i read this count property from the response inside my controller (probably inside my attachRequestCompleted)?? I would really appreciate any help in this regard. Thanks.
Kind Regards,
Ashish
Tags edited by: Michael Appleby

HI Chandra,
Thanks for your suggestions.
But i think in my case we do not want to get the complete list. We still want to get only 100 items initially and then if the user would scroll down he/she would see more items. But we already need to know the total number of items for the purpose of showing a message to the user. For e.g. Total issues (515), but the table would initially show only 100 and then another 100 after scroll. So setting the size litmit to max would not help.
And to be able to use the $count you mentioned, we have to still make another oData service call which we do not want.
But as i mentioned there is already a property named "__count" in the response of the bindItems() method call and i see that it has correct count but not sure how to retrieve it inside the controller. Thanks.
Regards,
Ashish

How to get the count of distinct customer in matrix?

Similar Messages

Maybe you are looking for