How to get the details of entry date in SQ00.
Hello,
Can anybody let me know the steps how to get the entry date in the report SQ00.Here when i am selecting entry date its coming as 00.00.00.(as zero).please let me know how to correct the steps with proper steps.
Hi
Apply the SAP NOTE 562031. This will rectify the error. I too faced similar problem which was then corrected when this Note was applied.
Test it first an then let me know
Similar Messages
-
How to get the today's julian date in java?
how to get the today's julian date in java?
hi can any one tell me how to get the todays julian date using Calender class or GregorianCalender class....
Julian date for 2006.November.01 AD 05:54 PM : 2454041.0
i have tryied with
calJ.setGregorianChange(new Date(Long.MAX_VALUE));
System.out.println(sdf2.format(calJ.getGregorianChange()));
thanks
Tushar
Message was edited by:
lad_tusharthanks a lot....for intrest....
I have found some details about the Julian calendar as follows:
The Julian date for 2006: JAN: 01:12:01:59 is 2453737.00138
245 represent the year digits for year 2006
3737 represent the date fir 1 Jan
.00138 represents the time for 12:01:59
Julian date change as per every day 12 noon it increase one digit in it.
As per ref from
http://www.aavso.org/observing/aids/jdcalendar.shtml
Also chk this calendar where Julian date is 20. October 2006 for 02 November 2006
As per ref from
http://www.calendar.sk/julian_calendar-en.php
I have tried the pure �GregorianCalendar� class from jdk1.4 API and its setGregorianChange method but not getting as per the expected Julian date format. Using the �setGregorianChange()� i have setting the cutover date to Long.MAX_VALUE it means GregorianCalendar now have to act as per the Julian calendar ...so after setting the cutover date it return me changed date using �getGregorianChange()� but that was not the Julian date of the current date...as expected or as per above both scenario. Even though the last two digits are nowhere equal to the actual Julian date.
Program
GregorianCalendar cal = new GregorianCalendar();
cal.setGregorianChange(new Date(Long.MAX_VALUE)); // setting the calendar to act as a pure Julian calendar.
// cal.set(Calendar.DATE, new Date().getDate()); // seting the current date
// Date todayJD = cal.getGregorianChange(); // getting the changed date after the setGregorianChange
Date todayJD = cal.getTime(); // getting the calculated time of today�s Julian date
SimpleDateFormat sdfJulianDate = new SimpleDateFormat("yyDDD");
SimpleDateFormat sdfJuliandayOfYear = new SimpleDateFormat("DDD");
System.out.println("today Date = " + new Date());
System.out.println("Today as julian date = " + sdfJulianDate.format(todayJD));
System.out.println("Today as day of year = " + sdfJuliandayOfYear.format(todayJD));
OUTPUT:
USING : Date todayJD = cal.getGregorianChange();
Today Date = Thu Nov 02 15:17:05 IST 2006
Today as julian date = 94229
Today as day of year = 229
USING : cal.set(Calendar.DATE, new Date().getDate());
Today Date = Thu Nov 02 15:19:22 IST 2006
Today as julian date = 06319
Today as day of year = 319
USING : Date todayJD = cal.getTime();
Today Date = Thu Nov 02 15:17:59 IST 2006
Today as julian date = 06306
Today as day of year = 306
There is one another concept i found to get the Julian day of the year as per the Julian day chart mention on nasa site (http://angler.larc.nasa.gov/armsgp/JulianDayChart.html) and i m getting the moth of the year that is 306 for nov 02 2006 using getTime() method in above code then the out put is right for Julian day. But it was not as per the expected Julian date format. So in conclusion we can only able to retrieve the day of year for the Julian calendar. hope their will be a solution for this problem in java api ....else we allways have to depend upon the third party api that was not accepteble some times.....
Kindly chk chart on the site
http://angler.larc.nasa.gov/armsgp/JulianDayChart.html
http://weather.uwaterloo.ca/julian.html
http://www.fs.fed.us/raws/book/julian.shtml
Thanks,
Tushar Lad -
I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?
Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). -
How to get the difference of two dates in years,months and days
Hi friends,
how to get the difference of two dates in years,months and days
for ex 2 years 3 months 13 days
select (sysdate-date_Start) from per_periods_of_service
thanksSomething like this...
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
2 select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
3 select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
4 )
5 -- end of test data
6 select c_start_date, c_end_date
7 ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
8 ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
9 ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
10* from t
SQL> /
C_START_D C_END_DAT YRS MNTHS DYS
17-NOV-06 21-JAN-08 1 2 4
21-NOV-06 17-FEB-08 1 2 27
21-JUN-06 17-JUL-08 2 0 26
SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too. -
How to get the name of a Data Element of a generic Table!
Hi guys!
In my function i have the following import paramenter
i_outtab type standard table
now i import a table and i want to get the dataelement of the fields.
is there a way to do this??Hello Thomas
Perhaps the following sample report may be useful for you.
*& Report ZUS_SDN_RTTI_STRUCT_COMPONENTS
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
*& Thread: How to get the name of a Data Element of a generic Table!
REPORT zus_sdn_rtti_struct_components.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_outtab.
TYPES: bukrs TYPE bukrs.
TYPES: kunnr TYPE kunnr.
TYPES: END OF ty_s_outtab.
DATA: gdo_data TYPE REF TO data.
DATA: gs_outtab TYPE ty_s_outtab.
DATA: go_typedescr TYPE REF TO cl_abap_typedescr,
go_structdescr TYPE REF TO cl_abap_structdescr,
go_datadescr type ref to cl_abap_datadescr.
DATA: gs_comp TYPE abap_compdescr,
gd_dtel type string,
gt_dfies type ddfields.
FIELD-SYMBOLS:
<gs_struct> TYPE ANY.
START-OF-SELECTION.
BREAK-POINT.
GET REFERENCE OF gs_outtab INTO gdo_data.
ASSIGN gdo_data->* TO <gs_struct>.
go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
go_structdescr ?= go_typedescr.
BREAK-POINT.
LOOP AT go_structdescr->components INTO gs_comp.
go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
gd_dtel = go_datadescr->get_relative_name( ).
write: / syst-tabix, 'Data element =', gd_dtel.
ENDLOOP.
END-OF-SELECTION.
Regards
Uwe -
How to get the Details Regarding the tcode like used by and used in .
Hi all,
My requirement is if i give the Z* Tcode in the selection screen I should get the details like program Name and Creator Name and created on and last Changed by and used by and used in Related Data.
Somehow i managed to get all the data except for two fields used by and used in .Please let mke know is there any Function Module to fetch the used by(User Name ) and used in data or any table where this data is saved.
Thanks in Advance.
Regards,
NaveenHi Naveen,
What are you exactly looking for in "used by" (if it's who launched the transaction lastly -> performance statistics, transaction ST03N, search forum how to read it) and "used in" (programs in which the transaction is statically defined in CALL TRANSACTION, and other statements -> CROSS table)?
BR
Sandra -
How to get the details of the readings in counter tab in crm order
Hi experts,
I have the following requirement.
I am creating service order thru crmd_order.In Transaction data tab - > in counter tab-> i have readings. These belong to the readings of the vehicle. I want to read these details. I am not able get the way.
Pl suggest me how can i get the details of the readings in counter tab of the transactional data of a crm service order.
Thanks,
mallikHi experts,
Even I am facing the same issue
Kindly provide some inputs
Thanks,
Surjeet Bhati -
How to get the details of Transports which are yet to be imported
Hi Experts,
Kindly let me know how to get the Transport request details which were not yet imported.
For example:
We have two client in development system 300 and 400, The transports which are created in 300 and imported to 400 (in SCC1).
I need to know the details of transport requests related to 300 which are yet be to moved to 400.
Where can i get these details.
Thanks,
Narasimhan KrishnaNarasimhan,
Take a closer look at Yves KERVADEC's approach. The issue here is that typically SCC1 is used to move transports which have not yet been closed. You can see the details of any transport via se01/se09/se10, whether open or closed, but my interpretation of your question is that the customer wants to know which transports have been imported into the unit test client (400) via SCC1, which transports have been brought in by the transport system (after they were closed), and which transports have not yet been sent to either the unit test or QA system (i.e. are still open).
My guess is that you are trying to track down why things work in the unit test client and not in the QA client. That is actually a different question with a different approach, but if that's what you really want to answer, go ahead and ask that question in a separate thread and you'll get a ton of techniques.
Back to the question you actually asked: By writing a query, you can get a list of transports which have been brought in to the unit test client via SCC1. You can also get this information from SCC1 --> Goto --> Log Display. Then click All Transport Requests and doubleclick on the client. This will give you the import log of your unit test client with date/time stamp. Analysis of that data indicates to me that perhaps you may want to look at CC0_RSCCPROT03_ALV, but I'm not an ABAPer so the previously mentioned tables are probably better.
Anyway, once you have a list of transports which have been imported, you can subtract out the ones that have been closed and transported downstream (and back into the unit test client.. your transport path does re-import the final version of the transports into the unit test client... right?). You can get that information from another query or you can get the list from STMS as suggested by Aparajit Banik.Then you'll have a list of transports which have been imported into the unit test client via SCC1 but have not yet been released and made it downstream. This will give you a "hit list" of transports which might be causing a mismatch between your unit test and QAS clients. You would then inspect them more closely with SE09/SE10/SE01 (I prefer se01, but different folks prefer different version of the transaction).
Again, there are better ways to deal with client mismatches, but I'm answering the question you asked in case I misunderstood the underlying subtext.
I hope this helps!
Best regards,
--Tom -
How to get the values from struct data type using java code..?
Hi ,
I am newer to java.
we are using oracle database.
How to get the data from struct data type using java code.
Thanks in Advance.
Regards,
kumarHi Rajeev,
To retrieve a FilterContainer you will need to traverse the report structure:
ReportStructure boReportStructure = boDocumentInstance.getStructure();
ReportContainer boReportContainer = (ReportContainer) boReportStructure.getReportElement(0);
FilterContainer boFilterContainer = null;
if (boReportContainer.hasFilter()) {
boFilterContainer = boReportContainer.getFilter();
} else {
boFilterContainer = boReportContainer.createFilter(LogicalOperator.AND);
Calling boDocumentInstance.getStructure() will retrieve the entire structure for the document.
Calling boReportStructure.getReportElement(0) will retrieve the structure for the first report of the document.
Hope this helps.
Regards,
Dan -
How to get the ep user information data in the web dynpro?
Hi all
I want to create a web dynpro application on EP.I want to get the ep user information data in the web dynpro.How can I do?Thanks.Lin,
Two steps to achieve this:-
<b>Step 1:</b> Add the following code in your view Controller:-
IWDClientUser user = WDClientUser.getCurrentUser();
IUser objUser = user.getSAPUser();
wdContext.currentContextElement().setXXXX(objUser.getUniqueName());
wdContext.currentContextElement().setYYYY(objUser.getFirstName());
wdContext.currentContextElement().setZZZZ(objUser.getLastName());
where XXXX, YYYY , ZZZZ are the context names.
getUniqueName : Gives Login id of Portal user.
getFirstName : Gives First Name of the Portal user.
getLastname : Gives Last Name of the Portal user.
<b>Step 2 : </b>Use "Organize imports" and make sure that you have the following two libraries added in the build path of your project. You can do these by right clicking on your project name ==> Properties ==> Java Build Path ==> Libraries ==> Add External jars.
The external jars are :
<b>com.sap.security.api.jar
com.sap.security.api.perm.jar</b>
Finally rebuild your project and deploy.
Regards,
<b>Chintan Virani.</b> -
How to get the detailed version of ORACLE?
hi,
the version of Oracle Enterprise Version is 9.2.0.2.0, recently I patched it to 9.2.0.6.0, and wanted to get the detailed version by using MetaData in OCCI, but what I got is still 9.2.0.2.0. how can I get the "9.2.0.6.0"?
thanks for your help!
scripts:
Environment env = Environment::createEnvironment(Environment::OBJECT);
Connection conn = env->createConnection("billing", "billing", "boss");
MetaData meta = conn->getMetaData("testdb", MetaData::PTYPE_DATABASE);
db_ver = meta.getString(MetaData::ATTR_VERSION);
cout << "database version: " << db_ver << endl;
sapI just patched client-side, not server-size. so I guess the returned value from MetaData::getString(MetaData::ATTR_VERSION) represents the server's version.
-
How to get the details inside base domain name?
I need to extract the details inside the base DN like ou="" ,cn="" and so on..
Somebody please help me in getting the details inside the base domain name. I could able to get the attribute names and values for the domain name...
Anyone please help me?
Thanks in advance...
Edited by: Preethi_Engineer on Aug 3, 2010 9:54 PMHi Vipin,
This code snipet show that how to find the login user to the portal
public void LoginUser( )
//@@begin LoginUser()
String LogonID;
try{
// create an user object from the current user
IWDClientUser wdUser=WDClientUser.getCurrentUser();
IUser user=wdUser.getSAPUser();
//LogonID=user.getUniqueName();
wdComponentAPI.getMessageManager().reportSuccess(user.getFirstName()" "user.getLastName().toUpperCase());
//wdComponentAPI.getMessageManager().reportSuccess(LogonID.toUpperCase());
wdComponentAPI.getMessageManager().reportSuccess("Logon User ID : "+wdUser.getClientUserID().toUpperCase());
}catch(Exception e){
e.printStackTrace();
//@@end
Note: You also need to add"com.sap.security.2.0.0" jar file into your java build path liberary.
Thanks
Anup
Edited by: Anup Bharti on Oct 13, 2008 2:18 PM
Edited by: Anup Bharti on Oct 13, 2008 2:29 PM -
How to get the details of Calc. Formula
Hi,
Please let me know where can I check the detailed formula which is defined for subtotals(ex. Net value, list price etc.) in the pricing procedure that means how get the details of Calculation Formula which is maintained for price condition in the pricin procedure in CRM and ECC.
Please do needful
Thanks and Regards,
VenkatHi Venkat,
the source of a calculation formula in ECC can be reviewed either by transaction VOFM or by using the F4 help for the calculation formula in the pricing procedure definition (source code button).
As the formulas in CRM are implemented in JAVA and deployed on the VMC the source code is not available. Nevertheless the note 809820 and the attached guide provide some details. Nevertheless the VMC mini debugger provides some possibility to review the JAVA source code (see SAP note 1114609, transaction VMCJDB, double-click on dbsources and double click the JAVA source you like to review.
Best Regards,
Michael -
SSAS : How to get the details of a mesure by script
Hi,
I have 5 cubes in my DB. I have regulare mesures (count, min, max, ...) on the fact (see the botton ones in the print screen below)... but also some other calculations (see the top 3 ones in the print screen below).
When i use this MDX script....
SELECT [CATALOG_NAME] as [DATABASE],
CUBE_NAME AS [CUBE],[MEASUREGROUP_NAME] AS [FOLDER],[MEASURE_CAPTION] AS [MEASURE],
[EXPRESSION], [MEASURE_IS_VISIBLE]
FROM $SYSTEM.MDSCHEMA_MEASURES
WHERE CUBE_NAME ='EPE'
ORDER BY [MEASUREGROUP_NAME]
I get as a result this :
I need to get the details (expression) of 8 botton mesures ... as with the 3 top ones ...
example : the last one is 'Somme Montant' (in english is : SUM Amount). It is a sum on the musure 'Montant' (Amount).... as : SUM(Montant)
i want to show the real calculation behind it with the real name (as is on the fact) of the column on with the mesure is based.
Thank you for your help.
Nacer CREPUQ BI DeveloperThank you Dareen and Jerry,
I wasn't able to make it work ...
1. my case here do not work.
2. i don't see how to get the column name of the mesure as it is on the fact table. with MEASURE_NAME_SQL_COLUMN_NAME it shows its name as is displayed for the use.
ie: please show me how i can do what you sayed : you can overwrite the expressions of regular measures and list them out by script.
Please advice.
Thank you.
SELECT MEASURE_AGGREGATOR, MEASURE_NAME_SQL_COLUMN_NAME, MEASURE_AGGREGATOR
, CASE [MEASURE_AGGREGATOR]
WHEN 1 THEN 'Sum'
WHEN 2 THEN 'Count'
WHEN 3 THEN 'Min'
WHEN 4 THEN 'Max'
WHEN 8 THEN 'Distinct Count'
WHEN 9 THEN 'None'
WHEN 10 THEN 'AverageOfChildren'
WHEN 11 THEN 'FirstChild'
WHEN 12 THEN 'LastChild'
WHEN 13 THEN 'FirstNonEmpty'
WHEN 14 THEN 'LastNonEmpty'
WHEN 15 THEN 'ByAccount'
WHEN 127 THEN 'Calculated measure'
ELSE 'N/A'
END AS AggregateFunction
FROM $SYSTEM.MDSCHEMA_MEASURES
WHERE CUBE_NAME ='EPE'
Nacer CREPUQ BI Developer -
How to get the difference of two dates?
let's say i have a table named tblData and has 4 columns: data_RefNo, data_DateReported, data_TargetDate, data_Data
tblData returns 2 rows.
data_RefNo.............data_DateReported.............data_TargetDate........................data_Data
10000................10-20-2004 10:55:44 AM........10-20-2004 10:57:44 AM........Slow Response Time
10000................10-21-2004 10:55:44 AM........10-21-2004 11:55:44 AM........Bug Error
i just wana ask how to get the difference of the date_DateReported and date_TargetDate.
i tried this code but it didnot work
public Vector get_con_pf()
Vector vData = new Vector();
String query = "SELECT * FROM tblData WHERE data_RefNo= '"'10000'"'";
try
DBConnect db = new DBConnect();
db.openCon();
ResultSet rs = db.execute(query);
while (rs.next())
vData.addElement(DATEDIFF(mi, rs.getString("st_DateReported"), rs.getString("st_TargetFinishDate")));
db.closeCon();
catch (Exception e)
System.out.println("Error: " + e );
return vData;
i want to return the difference of the data_DateReported and date_TargetDate, i did this
vData.addElement(DATEDIFF(mi, rs.getString("st_DateReported"), rs.getString("st_TargetFinishDate")));but it didnot work.
How do i get that? because i want to return a vector.
the code must return the values:
2 for the 1st rows because the difference is only 2 minutes, and
60 for the 2nd row.ooops i tried this one:
query = "SELECT *, DATEDIFF(mi, data_DateReported, data_TargetDate) AS diff FROM tblData WHERE data_RefNo = '10000'";and it works.
hehehehe!!!!!!
problem solved! :)
Maybe you are looking for
-
Greetings, Recently I have been getting complete system crashes (grey screen 'drops' over desktop and I have to restart) while simply streaming Quicktime video through Safari. I need to run the Disc Utility but I cannot find my install disc. Can I cl
-
Service process is running in code page [MS Windows Latin 1 (ANSI), superse
All, I am trying to create Integration service, getting errors on Windows. Can anyone tell me where exactly where the service process is pulling the Latin 1(Ansi) settings from. I am stuck on this setup. regards girish
-
Is it possible to have any and all *.tar.gz files that are dumped to a certain folder automatically decompressed/unzipped to *.tar in order to be processed by an sFTP job? Thanks for any help you may be able to provide.
-
Hi I have an old non-BT email address which I can still receive on, but cannot send on. I've tried changing my outgoing server for that account to bt, but messages are still not being sent. (Normally I can make do without sending on that account, bu
-
I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off
please can someone help me When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows not connected i have tried all sorts of ways but without success why is this happening am i th