How to get the DISPLAY name for a page in 309

How do I get hold of the page DISPLAY name in Portal 309?
I need it for the purpose of created a custom greeting and page menu tree.
I can get the main internal name, but not the user friendly display name. It must be stored somewhere!
Regards,
John

Did you find an answer for this? I am attempting to do the same thing. I want to create a portlet with all available pages to a user. I can not seem to find the display name table.
[email protected]

Similar Messages

How to get the owner name for the file in ftp using abap ?

Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa Vanarchi

Hi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh

How to get the display name of the dropdownlist?

How can i get the display name of the dropdownlist.
I want to have value as other data not the same as display name.
In that case is there any easy way to get the display name of the selection from the dropdownlist.

I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
          HashMap bleh = new HashMap();
          bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
          Iterator it = bleh.keySet().iterator();
          while (it.hasNext()) {
               Object key = it.next();
               SelectItem selectItem = new SelectItem(key, bleh.get(key));
          //And then later, when you want to retrieve the label
          bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
CowKing
Message was edited by:
IamCowKing

How to change the display name for Gmail aliases?

I have a Gmail account with multiple aliases. They look like this:
Joe User <[email protected]> (Primary)
Support <[email protected]> (Alias)
Billing <[email protected]> (Alias)
Works great. I'm trying to set up Apple Mail on my new MacBook to support the aliases as well. I am able to input the e-mail aliases, but the display names for all are 'Joe User' which defeats the purpose of having the aliases.
I have to imagine I can do this. Can someone help me out?
Regards,
Dave

Anyone came here, refer to this post.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/change-of-display-name/m-p/6667672/highl...

How to get the class name of a page in oracle apex

Hi All,
Can anyone please let me know how we can get the class name of a page or region in oracle apex? I would also like to know how we get the DOM object ID for particular item.
I appreciate any help on this.
Regards
Raj

RajEndiran wrote:
Can anyone please let me know how we can get the class name of a page or region in oracle apex?What do you mean with class name? The name of the template (e.g. the css style class name)?
I would also like to know how we get the DOM object ID for particular item.Use firebug or inspect the source code of the rendered page to see the object IDs. Other then then, the typical ID of page items is the name of the item. For regions you can set your own ID.

How do I programmatically get the display name for a view object in Java?

When you define a view object, there is a display name that is configured. I would like to retrieve that in Java. Can someone tell me how?
Thanks, -Klaus

Klaus,
you can use the attribute definitions which you get using
getAttributeDefs
AttributeDef[] getAttributeDefs()This method is accessible via the vo.
If you need this information in a bean, you can use EL like you see if you drop a vo on a page.
Timo

How to get the context name for a proxied servlet container

I have been using tags to build links for applications that use Tomcat and I was wondering if tags that detect the host url can be used if the servet container is behind a proxy.
For example let's say that the Tomcat context is called
app_under_test
but this url is proxied as
testing.host/beta_testing.
All urls built by the application should be http://testing.host/beta_testing/... not http:localhost:8080/app_under_test/...
The only way I can think of to do this is to have a property file with a proxy url property that is used to build all application links.
Is there a way of doing this that would not require a property file?
Thanks for any ideas and pointers,
-=beeky

Hi,
1.Goto transaction SM37.
2. Select the Job
3. Click on "Step" tab in the Application tool bar.
4. You'll see the program name under "Program Name/Command" in the list displayed.
<REMOVED BY MODERATOR>
Regards,
Shiny
Edited by: Alvaro Tejada Galindo on Feb 1, 2008 1:20 PM

How to chage the display name in SC browser for the custome fields?

Hi,
I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
Thanks
Kevin

Hi Kevin,
when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
If you have created a Z data element, then adapt its description accordingly.
Rgds
Christophe
PS: please reward points for helpfull answers

C Programming: How can we get the filesystem name for a given file-path?

C Programming: How can we get the filesystem name for a given file-path?
Say I have a filepath=/mnt1/file1
Using some OS API like stat, can I get the Filesystem /mnt ?
Thanks in advance,
-V

Enter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
If you need to go further into the contents of the Application package, you can continue with /Contents...
Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app

How to get the column names of the table into the Dashboard prompt

how to get the column names of the table into the Dashboard prompt
Thanks & Regards
Kishore P

Hey john,
My requirement is as follows
I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
My pivot table looks like this
COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
1 CENTRAL 10 20 30 40
2 SOUTHERN 10 30 30 70
3 EASTERN 20 20 20 60
4 WESTERN 10 20 30 40
When i select the District in column selector
Report has to display rank based on Total Sales by District. i.e
------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
do you have any solution for this?
http://rapidshare.com/files/402337112/Presentation1.jpg.html
Thanks & Regards
Edited by: Kishore P on Jun 24, 2010 7:24 PM
Edited by: Kishore P on Jun 24, 2010 7:28 PM

In Mac how to get the Full name of a file Programmatically?

Hi Friends,
I am doing one Mac application for displaying the contents of a file. I can able to get some information about the file by using this code below...
NSDictionary *dict=[fileManager attributesOfItemAtPath:myPath error:nil];
Now I want to get the some other informations also like Full Name, copyRight, version... So Please suggest me how to get the full name of a file Programmaticallly?

Your question doesn't make sense.
First off, if you are going to get the attributes of a file, you need its full name before you can do anything. So that's part one taken care of.
This function returns a dictionary full of typical file information (type, size, mod dates, etc.) as well as some HFS data (creator code, type code) which, I strongly suspect, are not "pulled out of the file" but rather generated on the spot. (See NSFileManager for the full list of attribute keys.)
The other items you hoped of retrieving are not part of the regular file system. Sure, a Truetype font has a copyright string and a version, but what about an HTML file? A PNG? A text file you just created?
There simply are no standard functions to retrieve copyright and version.

How to get the ACCOUNTING_FLEXFIELD Name in a Multi Ledger Instance?

Hi,
How to get the <ACCOUNTING_FLEXFIELD> Name in a Multi Ledger Instance from logged-in Responsibility? Is there any profile option available?
SELECT id_flex_num
INTO l_structure_num
FROM apps.fnd_id_flex_structures
WHERE ID_FLEX_CODE = 'GL#'
AND ID_FLEX_STRUCTURE_CODE=<ACCOUNTING_FLEXFIELD>;
Tx

SMOD->SEUED001->Display componens->double click on EXIT_SAPLEDITOR_002->See the source code...
function exit_sapleditor_002.
*"*"Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(PROGRAM) LIKE SY-REPID
*"       EXCEPTIONS
*"              CANCELLED
include zxseuu22 .
endfunction.
PROGRAM is the importing parameter for the function module.
matt

How to get the Text name to pass in the parameter header in save_text

Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnan

Hi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How to get the VARIANT name in the program

Hi Guys,
Can somebody tell me how to get the VARIANT name in a program.
I have to perform some code with specific variant only. So I want to check in program which variant has been used to call the program.
Thanks,

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

How to get the DISPLAY name for a page in 309

Similar Messages

Maybe you are looking for