How to get the Dreamweaver CC interface to floating pallets

ie: no large grouped clunky window, just loose windows you can navigate to desktop easily
Hello ...
Ok i am one of those who hates the gropuped palets, its just to difficult to get to windows underneath, slows work down. I tried pulling all the pallets off the large window but wheni do i still have 1 large app window then when i close closes Dreamweaver ... Really loved the old interface, how do i get back to the "non-winbdows" mac versions of how adobe products windows looked and functioned.
thx
(had to edit - i frogot i did not use 6 as i didnt have time to figure it out then either, just stuck to old version)

I believe it's under Edit > Preferences > General where Mac users can turn off the "Application Frame".
PC users are stuck with it no matter what though.
EDIT: Though I'm not sure if it exists anymore, I switched to PC a while back.
Ah, it might be under Window > Uncheck Application Frame

Similar Messages

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

How to get the name of Interface Mapping ?

Beside the information given by setParameter() i like to know the name of the "Interface Mapping". Does somebody know how to get this information ?

Hi Frank,
not really there are a lot of information in there but <b>not the name of the interfacemapping</b>. By iterating through the xiContext given by setParameter() i got the following output:
<u>As defined in StreamTransformationConstants:</u>
MessageClass = RQ
VersionMajor = 003
VersionMinor = 000
ProcessingMode = A
MessageId = B9EFFFC05A7411D9CA2F00306E5DA806
RefToMessageId = 00000000000000000000000000000000
ConversationId = null
TimeSent = 20041230150856
Interface = ORDERS.ORDERS05
InterfaceNamespace = urn:sap-com:document:sap:idoc:messages
SenderParty = null
SenderPartyAgency = null
SenderPartyScheme = null
SenderService = BS_QGDBW
ReceiverName = msgIF_ORDERS_DATARIVER
ReceiverNamespace = http://prototype.com/xi/test
ReceiverParty = null
ReceiverPartyAgency = null
ReceiverPartyScheme = null
ReceiverService = BS_QGDBW
MappingTrace =
<u>Additional Information found:</u>
Direction = 0
MessageID = B9EFFFC05A7411D9CA2F00306E5DA806
BusinessSystemSender = BS_QGDBW
BusinessSystemReceiver = BS_QGDBW
SenderNamespace = urn:sap-com:document:sap:idoc:messages
SenderName = ORDERS.ORDERS05
QueueID = null
SenderSystem = BS_QGDBW
ReceiverSystem = BS_QGDBW
These are interresting informations but nothing to find out which interface-mapping-name has called the execute-method....
Regards,
Urs

Can you tell me how to get the Dreamweaver installer to initialize?

To: Adobe Support
The installer for the Dreamweaver trial will not initialize and the download advisor can't detect any problem. I used to have a subscription for an older version of Dreamweaver but wanted to check this version out before getting another subscription. The advizor packaged information about my system, and the token number is 40-39041-042922092012. Help please...TIA

The message you sent requires that you verify that you
are a real live human being and not a spam source, which has become a problem.
To complete this verification, simply reply to this message and leave
the subject line intact.
The headers of the message sent from your address are shown below:
From [email protected] Sat Sep 22 05:20:00 2012
Received: from mail.sgaur.hosted.jivesoftware.com (209.46.39.252:2464 helo=mx-out4.sgvm2hosted.jiveland.com)
     by biz82.inmotionhosting.com with esmtps (TLSv1:AES256-SHA:256)
     (Exim 4.77)
     (envelope-from <[email protected]>)
     id 1TFOgd-0002Z8-L4
     for [email protected]; Sat, 22 Sep 2012 05:19:59 -0700
Received: from adobe-vm-wa05.sgvm2hosted.jiveland.com (unknown 10.122.0.4)
     by mx-out4.sgvm2hosted.jiveland.com (Postfix) with ESMTP id 07AF1D05BE
     for <[email protected]>; Sat, 22 Sep 2012 06:19:57 -0600 (MDT)
Date: Sat, 22 Sep 2012 06:19:56 -0600

How to get the end time of an Interface?

How to get the end time of an Interface?

Hi,
As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
command on sourse.
<%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select      <%=odiRef.getPop("DISTINCT_ROWS")%>
     <%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from     <%=odiRef.getFrom(i)%>
where     <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
     JRN_FLAG <> 'D'
     <%} else {%>
     (1=1)
     <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
Command on target..
UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
<%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
check UD1 and UD2 columns.
Hope this will help you.
Regards
Saurabh

How to get the primarykey columns of the table in SAP BI Java SDK

Hi, I'm new to sap BI Java SDK. I'm not getting how to get the primarykey columns, using BI JDBC Connector (for relational data sources). If anybody knows, please let me know. its very very urgent task to be done in my project. In the below following code.... I have written a code to connect to the database through resource bundle, reading table names, once user select table name, i need to show the primary key columns of that table to the user. here i'm not getting how to get the primary key columns . Please send me the code if there is any method to find out the primarykey columns or a logic to get them. I will be greatful to you.... if you can do this favour.
Please check out the following code ........
ManagedConnectionFactory mcf;
IConnectionFactory cf;
IConnectionSpec cs;
mcf = new JdbcManagedConnectionFactory();
cf = (IConnectionFactory) mcf.createConnectionFactory();
cs = cf.getConnectionSpec();
ResourceBundle rbLocal = ResourceBundle.getBundle( "xxxx");
Enumeration propnames = rbLocal.getKeys();
while (propnames.hasMoreElements())
String key = (String) propnames.nextElement(); //out.print(key); //out.println("="rbLocal.getString(key)"");
cs.setPropertyValue(key, rbLocal.getString(key));
// Establishing the connection. // The IBIRelational interface provides an entrypoint to access // metadata and execute queries.
IBIConnection connection = (IBIConnection) cf.getConnectionEx(cs); I
BIRelational rel = connection.getRelational();
IBIQuery query = rel.createQuery();
String sqlStatement = "SELECT * FROM " + "BICQPERSON where type='pk'"; ResultSet rs = IBIDataSet dataset = query.execute();
Thanks SreeKanth

Hi,
looks like you are on Infomation Builders, correct? If yes through which adapter and to what DB are you connecting?? in an R3/BW system you can do the folowing:
"(ABAP)
SELECT DISTINCT FIELDNAME
FROM DD03L
WHERE TABNAME = '/BIC/QPERSON'
AND AS4LOCAL = 'A'
AND KEYFLAG = 'X'
ORDER BY 1
Another option is goto directly to the RDBMS; in this case let me which one are you using
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

How to get the column index inside a dataTable

Hello,
before I get staked, there are multiple threads handling familiar topics to the one I'm questioning about but none gives an anwer. If there is one, I'm propably to less skilled to see it.
So here is my Problem: I've build a web-interface to a time-recording system. The hours worked on a certain project are displayed in a dataTable component which is generated out of a mySQL Query. Each entry (column/row) contains a inputText component to display and edit the specific value.
Editing one of these inputText elements now fires a valueChangeEvent which reads the new value and stores it in the database. For that cause I need to know the row- and column-index of the inputText component that fired the event.
Using the getClientId method from the valueChangeEvent I get some Information which makes it possible to calculate the row/column index. A typical clientID looks like "form_table:mainTable:0:_id14". "form_table" is the ID of the form the dataTable is in. "mainTable" is the id of the dataTable component. "0" is the row the component is in. And finally "_id14" stands for the id randomly given to the inputText component by JSF.
My Problem is now, that though I can calculate the column out of the[i] "_id14", this calculation is hardcoded. So everytime I add a component in before the dataTable, the calculation needs to be adjusted in the code.
The Questions:
- How to force a sensefull id indicating a column-index for the inputText components inside the columns of a dataTable?
- Nicer since no workaround: How to get the column-index inside the dataTable on a natural way? (e.g. out of the valueChangeEvent the specific inputText component fires)
After some investigation here on the board and on the net I know multiple ways to get the row index, (Things like component-binding and so on) but I can't find a answer on how to get the column-index.
Thanks to all answers and/or links to things my eyes missed while searching for one.

...then index 0 becomes index 1 and my program doesn't work properlyThe program works properly, just not as you expect it to.
As you've noticed the table gives you the flexibility to move columns around. So if you move column 0 to column 1, why would you expect to still use 0 as the index? The table manages the reordering of columns for you to make sure the data being displayed in each table column comes from the correct column in the data model.
You can manage this yourself using one of the following methods (I forget which one):
table.convertColumnIndexToModel(int viewColumnIndex)
table.convertColumnIndexToView(int modelColumnIndex)
Or, you can get data from the data model directly:
table.getModel().getValueAt(row, 0);

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How to get the current executing file/itself absolute directory?

hellooo,
          gentlemen/lady, how to get the current executing file/itself absolute directory?
          thanks


          Hello,
          you can get the real path information of the JSP through the servlet context:
          http://java.sun.com/products/servlet/2.2/javadoc/index.html
          javax.servlet
          Interface ServletContext
          Method getRealPath
          Christian Plenagl
          Developer Relations Engineer
          BEA Support
          [email protected] (alex mok) wrote:
          >hellooo,
          >
          >gentlemen/lady, how to get the current executing file/itself absolute
          >directory?
          >
          >thanks

How to get the pull path name from a file upload window

Hello everyone!
I have encountered the following problem with the following JSP code:
<form method="post" action="filename.jsp">
Upload JAVA program:
<input type=file size=20 name="fname" accept="java">
<input type=submit value="go">
</form>
<%
String s = "";
if (request.getParameter("fname") != null)
s = request.getParameter("fname")
%>
The value of s is alway the filename. However I want to get the full path in addition to the filename, so that I can read the file. Does anyone know how to get the pull name of the file?
thanks a lot in advance,

Dear Sir,
thanks a lot for your reply. Please let me explain what I intended to do: I want to upload a file from the local machine and then read the content of the file. Therefore I need to the fullpath of the filename like /var/local/file.java instead of file.java. The latter is what I got.
The problem I have with your code is that the function like "request.getServerScheme()" is not recognized. Maybe is it because I didn't install servelet package? I only installed javax package btw. Also my application runns on Tomcat server if this could give you some information. The error message I had is as follows:
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
[javac] Compiling 1 source file
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:133: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
url = request.getServerScheme()
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:136: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
+ ((("http".equals(request.getServerScheme()) && request.getServerPort() != 80)
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:137: cannot resolve symbol
symbol : method getServerScheme ()
location: interface javax.servlet.http.HttpServletRequest
||("https".equals(request.getServerScheme()) && request.getServerPort() != 443))
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:139: cannot resolve symbol
symbol : method getServletConfig ()
location: interface javax.servlet.http.HttpServletRequest
+ "/" + request.getServletConfig().getServletName()
^
An error occurred at line: 36 in the jsp file: /addExercise.jsp
Generated servlet error:
/usr/local/jakarta-tomcat-5.0.12/work/Catalina/localhost/tutor/org/apache/jsp/addExercise_jsp.java:140: cannot resolve symbol
symbol : variable path
location: class org.apache.jsp.addExercise_jsp
+ "/" + path
^
5 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:128)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:413)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:453)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:437)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:555)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How to get the URL parameter value when navigating from JSP Page to portal

Hi All,
I have web Dynpro application with one button, while clicking that button It will navigate to JSP page as external window. In the JSP page I have a input field and Button.
In the JSP page input field I will enter some values and press submit button, it will navigate to Portal page by passing some URL parameter with values.
Once user entering to portal by default WD page displayed, the same WD page I try to get the URL Parameter which I have passed from JSP page, but I am not able to get the URL parameter value.
If same application running in without portal, I can able to get the URL parameter values. I am getting the URL parameter by interface view default inbound plug parameter.
How do we resolve this problem?
Regards,
Boopathi M

Hi
Please try these link might helpful for you
1.[How to call WebDynPro application from JSP |/thread/452762 [original link is broken];
2.[How to get the previous page url from abstract portal component? |/thread/1289256 [original link is broken];
3.[how to launch and pass a parameter |/thread/5537 [original link is broken];
Best Regards
Satish Kumar

How to get the user view

Hi,
Can anyone say how to get the user view of a user logged in through admin interface.
I have tried to get the roles of logged in user as below:
<ref>waveset.roles</ref>
it did not work..
Please suggest

who said you cant create view for logged in user, try the following machi
<Action id='0' name='User View' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getView'/>
<Argument name='authorized' value='true'/>
<Argument name='type' value='User'/>
<Argument name='id' value='$(WF_CASE_OWNER)'/>
<Return from='view' to='userview/>
</Action>
Rgds,
Purush

VS2013 / Team Explorer vsix - How to get the currently selected build definition?

Greetings,
My goal with a simple extension is to right-click any build definition and if my "Show Build Def Stats" menu item is selected, pop a message box with some summary details I plan to pull from the IBuildDefinition interface.
I'm missing something fundamental I'm sure, but I cannot figure out how in the menu handler the actual build definition that I clicked on.
The menu command is added where I want it successfully:
Symbol info used to get this there:

<GuidSymbol name="guidTeamExplorerBuildDefContextMenu" value="{34586048-8400-472E-BBBF-3AE30AF8046E}" >
<IDSymbol name="menuBuildDefinitionContext" value="0x109"/>
</GuidSymbol>
I am stumped as to how to get the fact that I clicked the "ISRepository" build definition in either the Initialize() or MenuItemCallBack() methods, I haven't come across the right service or container object that I recognize.
Much obliged!
--Jordan

I have been investigating this for a while using .NET Reflector and finally I got it:
In VS 2013, add references to the following assemblies in the folder C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer:
Microsoft.TeamFoundation.Controls.dll
Microsoft.TeamFoundation.Build.Controls.dl
And then use this code:
Microsoft.TeamFoundation.Controls.ITeamExplorer teamExplorer;
Microsoft.TeamFoundation.Controls.ITeamExplorerPage teamExplorerPage;
Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt buildsPageExt;
teamExplorer = base.GetService(typeof(Microsoft.TeamFoundation.Controls.ITeamExplorer)) as Microsoft.TeamFoundation.Controls.ITeamExplorer;
teamExplorerPage = teamExplorer.CurrentPage;
buildsPageExt = teamExplorerPage.GetExtensibilityService(typeof(Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt)) as Microsoft.TeamFoundation.Build.Controls.Extensibility.IBuildsPageExt;
foreach (Microsoft.TeamFoundation.Build.Controls.Extensibility.IDefinitionModel definitionModel in buildsPageExt.SelectedDefinitions)
System.Windows.Forms.MessageBox.Show(definitionModel.Name);
* My new blog about VSX: http://www.visualstudioextensibility.com * Twitter: https://twitter.com/VSExtensibility * MZ-Tools productivity extension for Visual Studio: http://www.mztools.com.

How to get the Dreamweaver CC interface to floating pallets

Similar Messages

Maybe you are looking for