How to get the F4 help for table columns ..
Dear All,
Here I have created table with cell editors of INPUT FIELD .
And I would like to provide the f4 help for those columns .
Here I have checked the node , which i have binded to the table, there input help mode is set to Automatic and search helps are also attached for that node .
But in the table I am not getting the F4 help . Where as if i create the input fields invidually i am able to see the F4 help .
But for table column I am unable to find..
Help me regard this...
Thanks & regards,
Veerednra Nath
Hi,
In debugging , the I have seen the node info attributes list ( VALUE_HELP_ID and VALUE_HELP_MODE ) .
For you understanding, Here I am giving the values which contains ,
VALUE_HELP_ID contains the AUTO:VBUK
AUTO:VBUP
AUTO:MAT1
AUTO:H_T023
and
VALUE_HELP_MODE contains the all Zeros for all the four attributes .
Hope I have given correct inputs .
Thanks & Regards,
Veerendra Nath
Similar Messages
-
How to get the F4 help for a field in the selection screen
Hi all,
I am working on a report program. In the selection screen, I have the field 'Brand Node ID'(ZNODEID). The requirement is to have the F4 help for this field. This field is available in a 'Z' table ZNODETAB. There is no Value table maintained for the corresponding data element. So, without disturbing the table data element/domain, I should get the F4 help in the selection screen of the report. In the F4 help, data should be fetched from the table ZNODETAB and the field is ZNODEID. Is there any way to do this.
By searching the function modules, I could find that, we can use the FM F4IF_INT_TABLE_VALUE_REQUEST. But, I am not Sure. Can someone tell me the parameters to be passed to this function module to get the F4 help and the procedure to follow. S_NODEID is the select option used in the program. Please help me in this regard. Thanks in advance.
Thanks & Regards,
Paddu.look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZNODEID'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = p_field
value = space
value_org = 'S'
display = 'F'
TABLES
value_tab = it_node
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
endform -
How to get the delivery number for the sales order
hi
how to get the delivery number for the sales orderHi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps... -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to get the depreciation areas for an asset in particular period
Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.ChTry table ANLB, then read ANLC.
Regards. -
How to get the owner name for the file in ftp using abap ?
Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa VanarchiHi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh -
How to get the last error for while loop?
How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.
What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time . -
How to get the version no. for service po?
Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie -
How to get the document number for a ware house order.
Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advanceThere are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material. -
How to find the search help for the parameters stmt in a report
hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statementI am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful. -
How to get the baselinegrid position for a line?
Hi All,
How to get the baselinegrid position for a line in a paragraph?Hi,
2nd line baseline grid for yourPara paragraph is:
yourPara.lines[1].baseline;
last line baseline is:
yourPara.endBaseline;
Jarek -
HT204291 how do get the media icon for mac mirroring when running airplay on itunes?
how do get the media icon for mac mirroring when running airplay
Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US -
How to get the latest update for the phone?
hey does anyone know how to get the latest upgrade for my phone? 3230 nokia
http://www.nokia.co.uk/nokia/0,,58162,00.html
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail. -
HT1539 how to get the french track for the digital download
how to get the french track for the digital download from having purchased a DVD at the store
Hi, pascalegadbois.
Thank you for the question. From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy. If this is the case, then the instructions below will walk you through how to adjust the language settings. Also, depending on the region the video was downloaded, not all languages are supported.
iTunes: Language settings for video
http://support.apple.com/kb/HT5562
Cheers,
Jason H. -
How to get the index of a h:column element?
Hi!
I'd like to know how to get the index of a <h:column> element.
Here is the code of what I'm trying to do:
<h:column>
<a:commandLink
value="#{familyAction.familyDocsByPrj}"
action="#{homeAction.search(ROW_INDEX)}"
reRender="rightAppPanel" />
</h:column>When clicking a row, I'd like to make a "search" depending on the selected row.
Does anybode know how to do that?
Thanks a lot :)Thanks a lot for all your answers! :)
I finally got to do something with my little knowledge =P
I created a new class containing all the data needed for the dataTable (including a "String id").
And that's what I get:
<h:column>
<a:commandLink
value="#{familyAction.familyDocsByPrj.name}"
action="#{homeAction.search(familyAction.familydocsByPrj.id)}"
reRender="rightAppPanel" />
</h:column>
Maybe you are looking for
-
hey all just trying to set up my ipad synced up with itunes but now if i try to download any apps i put my password in then comes up with unknown error and wont download any help would be great
-
IDVD6 burning but not closing out disc?
I am still perplexed as to why iDVD 6 is burning discs that Titanium Toast 6 finds defective for copying purposes. The toast dialogue box reads "The content on disc to be copied cannot be unmounted. All open files and programs on this volume must be
-
Camera Button just stopped working
Very strange ... has been flawless since September. Starting today, when I push the Camera Button, it no longer vibrates and starts my camera APP. After I manually select the Camera App from my App drawer, the button works fine to take the picture.
-
Bootcamp Question! From a Converted PC guy
When I go to bootcamp to put windows xp on it, it tells me I MUST print out the directions because i'll need them. I dont have a printer currently. Do I REALLY need to print it out? Or can I just go ahead and click continue? From what I have heard, i
-
VAT Code invisible in dropdown
Hi, When posting a transaction, the client doesn't want to see all the VAT codes defined in table 007A. Is this possible? Annelize