How to get the focus at the end of text ?

I am having applet with awt TextField component and some default text. (MSQ-)
To have a focus to text field I am using :
refnoTextField.requestFocus();
But this gives focus at the biginning and not at the end of text. I want the focus at the end (i.e. after MSQ-)
How to get the focus at the end of text ?
any help ?
manisha
manisha

public void focusGained(FocusEvent e) {
if (e.getSource() == yourtextbox) {
yourtextbox.setSelectedEnd(yourtextbox.getLength());
try this thing - not sure if it'll work, but I figgured out how to apply it to my textareas for keeping the focus on the last line of the textarea..it might work for your textboxes..
shrug

Similar Messages

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to Get the focus of the textbox.

Hi all,
I have a problem in getting the focus of the textbox, The scenario is in this way,
I have 3 textboxes in a window, each one should should get enabled one after the other only (i.e) Textbox2 should be enabled only after Textbox1 is filled and pressed the TAB button and Textbox3 is enabled only after Textbox2 is filled and pressed the TAB button. Textbox2 is also enabled when the cursor is in Textbox3 and SHIFT+TAB is pressed,
I tried this with the Focus Listener but i cant able to get the cursor in the textbox. Please help in this, how to do this.
Thanks in Advance.

844031 wrote:
Hi all,
I have a problem in getting the focus of the textbox, The scenario is in this way,
I have 3 textboxes in a window, each one should should get enabled one after the other only (i.e) Textbox2 should be enabled only after Textbox1 is filled and pressed the TAB button and Textbox3 is enabled only after Textbox2 is filled and pressed the TAB button. Textbox2 is also enabled when the cursor is in Textbox3 and SHIFT+TAB is pressed,
I tried this with the Focus Listener but i cant able to get the cursor in the textbox. Please help in this, how to do this.
Thanks in Advance.Hello user,
If you are talking about 'TextBox' of javafx then please start a new thread on Javafx Category here:JavaFX 1.x and JavaFX Script [ARCHIVE]
Thanks.,
narayan

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get boot camp in the emac

how to get boot camp in the emac

Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

How to get each thread in the threadpool

Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g :
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?

Willings wrote:
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;You don't
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g : You don't
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
Kaj

I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

Welcome to the Apple Community.
If you haven't turned find my phone off on the device, it should just reappear next time it is connected to an appropriate network. If you have turned off find my phone, turn it back on.

How to set the focus to the tabbed pane title?

Dear Friends,
I'm using tabbed pane (JTabbedPane) in my application. I have 2 tabbed panes and each contain some text fields and buttons.
In first tabbed, I have 2 text fields, OK and Cancel buttons. I have to set the focus to the title of the tabbed pane after it lost focus from the Cancel button (focus has to move from Cancel button to tabbed pane title by pressing tab key).
Could anyone please tell me how to set the focus to the tabbed pane title?
Thanks in advance,
Sathish kumar D

Thanks for your reply.
Could you please tell me how to set focus for title of the tabbed pane throug FocusTraversalPolicy?
because usually we set the focus for the component by requestFocusInWindow().
for example set focust to the button OK,
btnOk.requestFocusInWindow()likewise could you tell me how to set focus to Title of the tabbed pane?
Sathish kumar D

I am using the window xp and firefox 6. I see many videos on youtube. How I get that videos from the catch folder and where is it?

I am using the window xp and firefox 6.
I watch the youtube videos online.
How I get that video from the catch folder and where that catch folder are situated in the window xp.

''How can I view or retrieve a video from Firefox's cache''
To actually view/retrieve the file from the cache and its web address you can use
the "Cache Viewer" extension 32.8KB
* https://addons.mozilla.org/firefox/addon/cacheviewer/
* http://dmcritchie.mvps.org/firefox/firefox.htm#cacheviewer
For you to be able to view the cached file you would have had to have watched the entire file.
The latest version of the extension is 0.7b available in all versions you would have to override compatibility by any of these methods
* checking or pick up one of the xpi versions in the reader comments for Firefox 6.0
* extensions.checkCompatibility.6.0 set to False
*: http://kb.mozillazine.org/Extensions.checkCompatibility
* or with an extension "Add-on Compatibility Reporter" (84.0 KB) seems preferred in this group
*:https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
There are also extensions such as Video downloader 132.8 KB
* Download YouTube Videos + Flash Video Downloader / Download-Helper
*:https://addons.mozilla.org/firefox/addon/download-youtube-videos/
<br><small>Please mark "Solved" one answer that will best help others with a similar problem after you've tried several things.</small>

How to Get a Version of the ME

I purchase package Adobe CS5, but Can not write in Arabic when in use photoshop or and others like .Illustrator ,Dreamweaver ,InDesign
What is the solution?
How to Make package Adobe CS5 write Arabic
" How to Get a Version of the ME"

Do you want to use an Arabic typeface in PS, or have the PS interface in Arabic?

How to get the focus at the end of text ?

Similar Messages

Maybe you are looking for