How to get the groups info for user

Hi guys i am new to ALUI..
i am trying to do some enhancement.
i want to know how to get the information of the users group and the group details using the IDK API?
Can sombody share some code?

Hello,
You are welcome. Here is one way of get what you want:
1) get all groups id's
IPortletContext - >IRemoteSession -> IUserManager - > getCurrentUserGroups() -> int []
2) get details about group
IRemoteSession.getObjectManager(ObjectClass.UserGroup ) ->
cycle over int []: {
IObjectManager -> querySingleObject(comminity id) -> IObjectQueryRow -> getName()
Because you are going to use PRC and make SOAP calls to portal don't forget setup WS to pass token to portlet (check WS settings)
Edited by Bryazgin at 05/29/2008 7:48 PM

Similar Messages

  • How to get the Group ID for the groups in the address book

    There are 2 AddressBooks 'ABook1' and 'ABook2'. Both the AddressBooks have Group named 'Group1' and AddressBook 'ABook2' had a another group 'Group2' which has 'Group1' (from 'ABook1') as one of the members. How can i get to know that which Addressbook is 'Group1' belongs inside the 'Group2' thru the Object API.

    I have never used this function module before, but looking at the coding, I don't think this will serve your purpose.
    I think it might be better to use method(s) from class CL_CRM_DOCUMENTS.
    Via the GET_INFO method you can retrieve the documents you need and using the DELETE method should delete these object. I did use the GET_INFO method etc. but we haven't deleted any objects. But according to the name of the method, it should DELETE the documents.

  • How to see the group membership for a user in oidadmin

    how to see the group membership for a user in oidadmin?
    I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.

    Hi,
    For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
    With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
    For example:
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
    will give you the list of groups that the user "cn=orcladmin" is a member of.
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
    will grive you all the groups that the user smithj is a member of.
    if you don't want to get the DN of the group you can change the last parameter of the query like this
    $ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
    will give you the CN of the groups the user is member of.
    let me know if this is what you need.
    Regards,
    Juan

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

    Hi,
    Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
    Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
    But this only works if the URL i give points to a static html page.
    So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
    Have u ever tried to do some things like this?
    Rahul

  • How to get the last error for while loop?

    How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

    What do you mean by "get" and "transfer"?
    If the shift register is not what you want, use a plan tunnel instead.
    Typically, programmers are interested in the first, not last, error.
    Can you show us your code so we have a better idea what you are trying to?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get the depreciation areas for an asset in particular period

    Hi frndz,
      how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
    Thanks and regards.
    Harisumanth.Ch

    Try table ANLB, then read ANLC.
    Regards.

  • How to get the version no. for service po?

    Hi,
    How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
    Regards,
    Rachel.

    Hiee,
    It is not like service PO does not have revision.
    REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
    MM->Purchasing->Version management -> External documents
    Here check for your doc type and purchase org version management is active.
    Regs,
    Appie

  • How to get the document number for a ware house order.

    Hello gurus,
    how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
    Thanks in advance

    There are several options.  When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
    Depending on how your system is set up you may have gotten a Transfer Order automcatically.  In this case you can look at LT24 - Transfer Order for material.

  • How to get the baselinegrid position for a line?

    Hi All,
    How to get the baselinegrid position for a line in a paragraph?

    Hi,
    2nd line baseline grid for yourPara paragraph is:
    yourPara.lines[1].baseline;
    last line baseline is:
    yourPara.endBaseline;
    Jarek

  • HT204291 how do get the media icon for mac mirroring when running airplay on itunes?

    how do get the media icon for mac mirroring when running airplay

    Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
    http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

  • How to get the latest update for the phone?

    hey does anyone know how to get the latest upgrade for my phone? 3230 nokia

    http://www.nokia.co.uk/nokia/0,,58162,00.html
    Gadget
    Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

  • How to get the delivery number for the sales order

    hi
    how to get the delivery number for the sales order

    Hi,
    1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
    2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
    Hope it helps...
    P.S. Please award points if it helps...

  • HT1539 how to get the french track for the digital download

    how to get the french track for the digital download from having purchased a DVD at the store

    Hi, pascalegadbois.
    Thank you for the question.  From your question it seems like you are looking to change the language setting for a movie downloaded via Digital Copy.  If this is the case, then the instructions below will walk you through how to adjust the language settings.  Also, depending on the region the video was downloaded, not all languages are supported. 
    iTunes: Language settings for video
    http://support.apple.com/kb/HT5562
    Cheers,
    Jason H. 

  • LabVIEW 8.0:: How to get the group name of a user logged to a NI Security Domain?

    Hello all,
    I am using LabVIEW 8.0 PDS.
    I created a new local domain called "MyDomain" in the "NI Domain Account Manager" . I added a new User called "MyUser" and a new group called "Maintenance". I set "MyUser" to be a member of the "Maintenance" group. Then, I configured LabVIEW to invoke the login dialog at start-up in order to log "MyUser" with the correct password.
    I would like to get the group name of the current user logged programmatically in a VI. I tried with the VI Server >> Application >> Security properties and methods and also with the properties and methods of the NI Security Class but it seems to be not so simple as I believed at start.
    I do not find any informations or KB on this (all the documents I found deal with LV DSC or TestStand).
     The final goal is to be able to manage a list of user for my application. Each user is a member of a group ("Administrator", "Operator", "Maintenance") and depending on the group, the user can or cannot access to some parts of the application.
    Thanks for your help.
    Matthieu
    Eurilogic

    Re,
    Here is a screenshot of this functions...
    If you really own LV DSC 8.2 the best thing to do is to reinstall it.
    Regards, 
    Message Edité par Richard K. le 04-02-2007 04:00 AM
    Richard Keromen
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception
    Attachments:
    security.jpg ‏3841 KB

Maybe you are looking for

  • Help with getting a set from a array

    if(values<=j) I want j to be the last number in the array, how can i get this i=array.length-1; so its the last number in the array however i want to write j as the last number held in the last array number. I know there must be a simple method for t

  • Gs broke now replacement phone wont sync at all

    Lost my trusted GS when it fell off my motorcysle and got run over by a car.  I was able to pick up the phone and head over to apple store.  they removed the sim card from my old phone placed it in a new one and told me i should have no problems once

  • Combining word processing and page layout templates

    Does anyone know how to (or if it's possible at all) merge or combine a Pages 09 document set up on the "Pages Layout" template with one set up on "Word Processing" template properly? Can these two templates "talk to each other"? I'm trying to combin

  • Universal Drive Adapter

    I have a HD from my old macbook pro and want to transfer the info to my new macbook pro. I was told to purchase a universal drive adapter that plugs into the HD and then into my macbook pro using the USB ports. The adapter is up and running and I can

  • Asian language (Thai) not displaying correctly

    Hi, I am using a the downloaded TextFlow Hello World example to display text (Flash CS4). Thai language characters show up as rectangles while Chinese (Simplified and Traditional) and Spanish show up correctly. Weird thing is that I also use a standa