How to get the HTTP response body if the body is a malformed XML document

Hi,
I am using HTTP service with resultFormat = "e4x" set. What i
get in response is a malformed XML document in
some cases. Usually HTTPService throws a FaultEvent with the
fault detail set to faultCode:Client.CouldNotDecode
faultString:'Error #1091' or some other Error #1085 and so.
My client tries to log these errors on the server by using
another HTTP service again. But i would like to know
in the client code during run time what exact XML response
came in the first HTTP response.
How do i retrieve this information?
thanks,
Sunil

service capture or charles debug proxy can do the job.
flex builder 4 is rumored to include a traffic sniffer as
well, but that's next year.

Similar Messages

Scheduled report failures - Unexpected error getting the HTTP response

Getting this error when scheduled report executes:
Unexpected error getting the HTTP response stream while generating report: http://cdmdb1c.nam.nsroot.net:4889/em/console/reports/render

Hi..
Thanks for the comment.
Below is how my web.xml entry looks like.
The requirement is to send a 404 error response and that will be handled by a servlet which inturn writes the output to the response object.
     <servlet>
          <servlet-name>ErrorPageServlet</servlet-name>
          <servlet-class>com.test.ErrorPageServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>ErrorPageServlet</servlet-name>
          <url-pattern>/error</url-pattern>
     </servlet-mapping>
     <error-page>
          <error-code>404</error-code>
          <location>/error</location>
     </error-page>>>
the first option to turn off the "show friendly html error pages" works fine.
It would be better if I can get a different solution

How to change the HTTP Response as XML (Content Type "text\xml") ?

Hi Friends ,
                 I have created one RFC Destination TYPE H . When i am trying to post some XML Message to that particular HTTP Service using POST method . It succesfully accepted the XML File but , it is returning the String as " OK" . In the connection test trace i have seen the Content Type as "text/html" but * I need to get as "text\xml" .*
                 I need to get response back as XML not plain text .
        1 Any Configuration setting do we need to do on Service (SICF ) ?
         2. Or any other place we need to modify to get the HTTP Response as XML not plain text
              Can you please help to solve the problem . Any clue ?
Thanks & Regards.,
V.Rangarajan
Edited by: ranga rajan on Jan 2, 2008 2:07 PM

Dear users,
we have requirement sending SMS to the customers mobiles. I am successfully sending the messages to the customers mobiles by using the above method. Facing issues with response message. The response messages is in plain text fromat in single line like...Sent
Using HTTP_AAE Receiver adapter.
The response message was failed while excution of the message mapping with the error
Mapping failed in runtimeRuntime Exception when executing application mapping program com/sap/xi/tf/_MM_SMS_CUST_RES_; Details: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Content is not allowed in prolog.
please share the comments how to pass the Status of the message to SAP ECC from SAP HTTP adapter
Regards,
Sudir.

How to change the HTTP Response as XML (Content Type "text\xml") When Post

Hi Friends ,
I have created one RFC Destination TYPE H . When i am trying to post some XML Message to that particular HTTP Service using POST method . It succesfully accepted the XML File but , it is returning the String as " OK" . In the connection test trace i have seen the Content Type as "text/html" but * I need to get as XML format no Srting ( Type "text\xml" . ) *
I need to get response back as XML not plain text .
1 Any Configuration setting do we need to do on Service (SICF ) ?
2. Or any other place we need to modify to get the HTTP Response as XML not plain text
Can you please help to solve the problem . Any clue ?
Thanks & Regards.,
V.Rangarajan

Dear users,
we have requirement sending SMS to the customers mobiles. I am successfully sending the messages to the customers mobiles by using the above method. Facing issues with response message. The response messages is in plain text fromat in single line like...Sent
Using HTTP_AAE Receiver adapter.
The response message was failed while excution of the message mapping with the error
Mapping failed in runtimeRuntime Exception when executing application mapping program com/sap/xi/tf/_MM_SMS_CUST_RES_; Details: com.sap.aii.utilxi.misc.api.BaseRuntimeException; Content is not allowed in prolog.
please share the comments how to pass the Status of the message to SAP ECC from SAP HTTP adapter
Regards,
Sudir.

How to get my macbook to connect to the Apple TV?

How to get my macbook to connect to the Apple TV in a strange apartment? I am housesitting for someone for a few months. They mentioned that i would be able to use their Apple TV to play stuff from my macbook. I am using their basic wifi in the apt, which works fine on my macbook and iphone, but see no Apple TV icon appearing on macbook screen, nor any connection happening. (nor is there anything connection w my iPhone). What gives? How can I establish a connection?

See
http://support.apple.com/kb/ts4215

2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

The following error occurs.
         Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #0:
Did you know that the Identity parameter is a "positional parameter"? That means you can use:
Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
It's a neat usability shortcut!
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
+     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.: mail1.dorothy.local
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
   gTransportException
    + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Randy Cheek

Good Morning,
Log into the server with an account that has appropriate Exchange rights, not a local account.
Note: By default - Domain Admins don't have Exchange rights.
Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
My Technical Blog: http://thelifestrategist.wordpress.com
Discipline is the Difference between Goals and Accomplishments
If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

How to Parse different HTTP response efficiently ... ?

how to Parse different HTTP response efficiently ... ?

1. Last time I helped you I didn't get any response back.
2. How is this question related to Swing?
3. Your question has too many details...
4. No help for you.

Some extra bytes appended to the http response by GzipResponseStream

My project needs to open pdf in browser. But the IE tells me that the file cannot be open by default program. It is either corrupted or has a incorrect filetype. And IE tries to download it.
I trace the http response by HttpWatch and find the content type is "application/pdf" which seems correct. And then I notice that there are some extra bytes in the http resposne. I use a servlet to retrieve the pdf file. The last few bytes of the http response are "%%EOF\n\r\n0\r\n\r\n". The last seven bytes "\r\n0\r\n\r\n" are the extra ones. I suspect these bytes are added by GzipResponseStream according to my debug result. But I dont have the source code so I am not sure.
If I do not use servlet but get the pdf file directly the http response will end with "%%EOF\n" and IE can open it successfully.
And I checked all responses from servlet they all have the extra seven bytes. Sometimes it cause the IE crash.
I appreciate if anyone can tell me what the problem is.

This is not a problem. I never know it is the chunked encoding of http protocol.

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to get latest record on top of the result list

Hi Gurus,
How to get latest record on top of the result list when you open the record.
saved data method in BT120H_CPL of OverView page and result list in ICCMP_INBOX.
Regards,
Ravi

Hi
Try sort descending by on fileld "changed at ".
manipulate the sort depends on your requirement
Regards
Logu

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

Can anyone explain to how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this it is driving me nuts

can anyone explain to me how to get rid off restore session on the mozilla firefox it keeps coming up every time i click on mozilla firefox it comes up restore session why is this i want to get rid of it it is driving me nuts

What do you have checked in Firefox Preferences>General?
Ciao.

How to get system temp dir. path on the fly ,system may be XP or Linux ??

How to get system temp dir. path on the fly ,system may be XP or Linux ??
please suggest solution

The default temporary-file directory can be retrieved
using:
System.getProperty("java.io.tmpdir")
Thanks a lot for u r reply this one works !!!!

How to get the HTTP response body if the body is a malformed XML document

Similar Messages

Maybe you are looking for