How to get the index of the minimize point

Need to get the index of the minimize point, marked as red cycle in the attached word file.
It is a collected data from different sample devices, so the curve may change a bit each time. But the overall profile is the same, just 2 main peaks.
I tried to detect the Y difference to see when the difference values change from negative to positive.
But, there are noise as tiny peak when zoom in, shown in word file. Then tried to use median filter to make it smooth. (Maybe better method should be used.)
But there are still some bigger regional peak. Any suggestion?
Is there any labview function or better algorithm can make it. Many thanks for your help.
Solved!
Go to Solution.
Attachments:
Curve shots(zoom in).doc ‏294 KB
Sample Data 1.vi ‏22 KB
Sample Data 2.vi ‏16 KB

A trick I often use is to sample the data with a much higher speed than needed. Then I apply some simple averaging methods or and median filter. After that I downsample the signal to a adequate rate by averaging x samples. This have been a saver for me more than once. How successful it is depends of noise character type. It just a hint as it may not be applicable in your application
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Similar Messages

How to get currect index of the cell on which user actually clicked.

Hi All,
In my widget I have displayed data in tabular format Now I am trying to send the value of the cell on which user has actually clicked. I am not using any standard table control. using standard text() elemnt I am displaying my data in tabular format. I am trying to pass the index of the cell onMouseDown event. I am using widget version 4.5. Please help.
Will reward max point on helpful answer.
Thanks and Regards
Avijit

hi Avijit,
If you are using Table control then you can try for the following :
getCell(rowNo,columnNo) - Gets the data from the cell located in the columnNo column, in the rowNo row.
getInputValue(rowNo,columnNo,value) - Returns the value from the cell located in the columnNo column, in the rowNo row.
thanks
Jaideep Srinivasan

How to get the index of the word at current cursor position in the word?

Dear All
I am implementing a spell checker of my native language in Word. Whenever I run spell checker it start from the first word. How can I make it to start from the current cursor position? How can I get the index of the word at the current cursor position?
Thanks in advance.
Dharam Veer Sharma

hi Dharam Veer Sharma,
Thanks for sharing the solultion with us.
It is helpful for others who have the same issue. And if you have any Office developing issue, please feel free to open a new thread.
Have a nice day.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the index of the error record when uploaded using standard LSMW

Hi Experts,
When uploading data using lsmw standard batch input method which creates an error session if any errors,how can we able to find the index of the error record
eg: If 3rd record in input file is incorrect then error session is getting created with the error and index as 1.But I want to know that 3rd record in my input file is incorrect.
Please help me out.

Srinivas,
In global data, i've written like this.
TYPES: BEGIN OF TYPE_ERROR,
             INDEX TYPE I,
             END OF TYPE_ERROR.
DATA: GT_ERROR TYPE TABLE OF TYPE_ERROR,
           GS_ERROR TYPE TYPE_ERROR,
           GV_TOTAL_COUNT TYPE I, GV_INDEX TYPE I,
           GV_STRING TYPE STRING,
          GV_FILE TYPE STRING VALUE '/usr/sap/interfaces/LSMW/Asseterror
In Begin of transaction,
GV_TOTAL_COUNT = GV_TOTAL_COUNT + 1.
In End of processing,
OPEN DATASET GV_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC = 0.
CLEAR GS_ERROR.
LOOP AT GT_ERROR INTO GS_ERROR.
CONCATENATE 'INDEX OF THE ERROR RECORD IS:' GS_ERROR INTO GV_STRING.
TRANSFER GV_STRING TO GV_FILE.
CLEAR: GV_STRING, GS_ERROR.
ENDLOOP.
ENDIF.
How and where will I be assigning error count and append it to the internal table.
Please help me out.

Get the index of the current line in use

Dear All,
Well how can i get the index of the current line in use?
this the code I am using :
Dim i As Integer
Set oBatchForm = SBO_Application.Forms.GetForm(Form_Id, 1)
Set oMainMatrix = oBatchForm.Items.Item(Matrix_Id).Specific
For i = 1 To oMainMatrix.VisualRowCount
    If oMainMatrix.IsRowSelected(i) = True Then
       GB_SelRow = i
        Exit For
    End If
Next
Exit Sub
This code is not working when there is a line in the document type texte.
please advice.

Hi Mary,
this is code in C#.NET which is working fine, try to do same in your code:
for(int irow=1; irow<=oMatrix.RowCount; irow++)
     if(oMatrix.IsRowSelected(irow))
     SelectRow = irow;
                break;
Hope it helps.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to delete the index for the business object BUS0033

Hi to all experts,
I'm applying note 1349496 the error here is no records with F4 help for the funds center .
solution from the note
Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
how to do the second part i have already applied the note .

any help

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

How to get boot camp in the emac

how to get boot camp in the emac

Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!

If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

How to get each thread in the threadpool

Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g :
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?

Willings wrote:
Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
1) How to get each thread in the threadpool;You don't
2) How to get each thread's data in the threadpool and dispaly them onto GUI;
e.g : You don't
There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
Kaj

How to get two parameters in the same line of selection screen?

hello
i need to get my selection csreen like bellow.
r1 radiobuttion -some space --p1 parameter
i should not get the parameter in the next line of radiobuttion.
how to get two parameters in the same line of selection screen?

hi....
modify the following code
it will work
SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
FOR FIELD P1.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS : P1 TYPE C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
P2 TYPE SCARR-CARRNAME,
P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK SL1.

How to get the index of the minimize point

Similar Messages

Maybe you are looking for