How to get the ipad to connect to the internet

My ipad 2 that i got for my birthday from my uncle has the wifi bars showing saying that it is connected to the internet but it will not go to any ofn the websites i try to go to and i tries it on my sisters ipod touch 4th gen and it wont do it either and i have absolutely no idea what to do

Your uncal's wireless sigle may be put out by his router but his Internet is most likely down. Try restarting his router and see what happens. Also make sure that his internet line is plugged into both the router and wall. Hope tis helps.

Similar Messages

  • How to get my ipad to connect to itune if the password is locked

    How to get ipad to connect to itune if the password is locked.

    note total data loss
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • How can I get my iPad to connect the love film app to my Apple TV?

    How can I get my iPad to connect the love film app to my Apple TV?

    Have you confirmed that the app supports AirPlay? If it doesn't, then you'll have to connect via screen mirroring. See:
    http://support.apple.com/kb/HT4437
    and
    http://support.apple.com/kb/HT5209
    Regards.

  • How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  Any ideas on how to get the system to read the iPad?

    When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it.  The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer.  Earlier today I wasn't having any problems.  I have shut down the iPad and the computer and started over, but that didn't help.  Any ideas on how to get the system to read the iPad so I can update the apps on it?

    Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
    Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
    Please let me know if you need any further assistance.

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • I am thinking of buying a MacBook Air and am wondering how to get the content of my iPad into iTunes.

    I have iTunes on an old pc and am thinking of buying a MacBook Air. I am wondering how to get the content of my iPad on to the Mac as I know that sync only happens in one direction, from pc to device. I assume therefore that when I attach my pad to the new Mac it will sync to an empty iTunes and I will have lost all the content of my pad. I know I can restore purchases, but what about contacts, calendar, photos and music not purchased from apple. I have a fairly recent backup on a pen drive but it is a usb2 device and is formatted for a pc. Any advice would be appreciated.

    Do I copy my media library or from a backup.  I have a backup on my pc and on an external drive. This drive is usb2 and formatted for windows so I can't connect it to a MacBook Air to make the transfer.  Equally I don't think there is a way to connect the 2 computers via a cable ie usb2 one end and usb3 the other.  Will the computers talk to each other via wifi if I enable home share although I think this is only for music which still leaves contacts, mail etc.
    I am sorry to be such an ignoramus but any further help would be appreciated.

  • How to get kensington K9294 to connect with original iPad. Bluetooth is on.

    How to get Kensington K9294 to connect with original iPad. Bluetooth is on.

    Sorry, but what is a Kensington K9294? I can find no mention of that product ID on the web, not even on Kensington's site. Do you mean the K39294, the KeyFolio keyboard/case?
    Regards.

  • Does anyone know how to get an ipad to use the wireless network from an airport?

    Does anyone know how to get an Ipad to use the wireless network from an airport express?

    By default, the AirPort Express will broadcast an unsecure wireless network with a Network Name of something like: Apple Network NNNNNN. Your iPad should "see" this network and be able to connect to it. Have you tried going through the iPad's Settings > Wi-Fi > Choose a Network... option. If so, does the AirPort's wireless network appear in the list of available networks?
    Can other wireless devices connect to the AirPort's network?

  • HT4061 My ipad was stolen, i would like to ask how to get the IMEI using the serial number DL*******FJ1.

    my ipad 2 was stolen last january 7, 2013.  i want to know how to get the IMEI.  unfortunately i was not able to connect it to my pc even once.  but i can tract my ipad using my find my iphone in icloud. the serial no is DL*******FJ1.

    Do you have the original retail box the tablet came in? If so its where the barcode is located, ideally labeled as the IMEI.

  • I bought two films on my ipod tough 4g ( normally comes up on my ipad if i have bought something on my ipod) but i dont know how to get the two films on my ipad without paying for them.

    I bought two films on my ipod tough 4g ( normally comes up on my ipad if i have bought something on my ipod) but i dont know how to get the two films on my ipad without paying for them.

    Movies work differant than TV shows, music and apps. With movies, to get them from one device such as an iPod Touch to an iPad, you would need to connect the Touch to your computer first and in iTunes under the file menu, hit transfer purchases. Next connect the iPad and you can sync the movie to the iPad.
    While the iPad is connected to the computer, in iTunes, click on the iPad in the left pane and when the screen loads, click movies and from there, you can select the movie that you want to sync.

  • How to get my macbook to connect to the Apple TV?

    How to get my macbook to connect to the Apple TV in a strange apartment? I am housesitting for someone for a few months. They mentioned that i would be able to use their Apple TV to play stuff from my macbook. I am using their basic wifi in the apt, which works fine on my macbook and iphone, but see no Apple TV icon appearing on macbook screen, nor any connection happening. (nor is there anything connection w my iPhone). What gives? How can I establish a connection?

    See
    http://support.apple.com/kb/ts4215

  • I just bought my iPad air and I would like to know how to get the App Store on it

    I just bought my iPad air and I would like to know how to get the App Store on it?

    It is included.

  • When I purchased a music app from itune store. This got downloaded in Itune maedia/Mobile applications.How to get the songs in that app to my  itune library or on to IPAD?

    I  or tranfer to my librarypurchased from Itune store a Music app. It is downloaded into intune media/mobile applications. How to get the full album msic/songs into my itunes library or on tomy IPAD? It doesnot open out. Can anybody suggest a way?

    If you have a music downloader app (depends on which you have), plug your iDevice into iTunes, go to your device (on itunes), go to your apps, scroll down, and select the app thats holding your music, click on "Save As" (should be located bottom right corner), save the music to your specific folder. Once done, follow through this: Adding music and other content to iTunes and you should have your music on your iDevice music app.
    Hope this helps.

  • How to get the health , performance information and about the services run on devices that have connected to the system center?

    Hi All,
    I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
    I will appreciate your feedback
    Thank you

    Hi,
    You can configure service monitor for the required service on the server
    refer below link for how to configure service monitoring
    http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
    You can use SCOM SDK to connect to the scom server using c# and get required information
    http://msdn.microsoft.com/en-us/library/hh329086.aspx
    you can find the database in below registry path on management server
    HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
    Regards
    sridhar v

  • Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

    anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

    They show in the camera roll, just not your computer?
    Have you checked every folder that is in the DCIM folder?

Maybe you are looking for

  • Qm order for in-process area

    Hi, we want to capture the quality appraisal cost at each operation thru qm individual order. but when we select 03 insp type in mat master, there is no individual qm order field in quality view. please advise how to capture quality cost during in-pr

  • Note 1529649 - Factory Calendar expires 2010

    Hi Experts, Need a clarifications. Does it affect any work schedule, when we extend the validity of factory calendar. when Public Holiday Calendar are used in factory calendar does it affect any work schedule . Please let me know if it affects anythi

  • RFCExec "best practices"

    Does anyone out there have any <u>examples</u> of the <b>rfcexec.sec file</b> that can be used to restrict OS commands from being executed at the ABAP level?  (SAP OSS note 618516)...? I am interested also in finding out if you can "wildcard" the lis

  • Unable to find driver for this platform "PowerMac2,1" - error?

    Hello dearest members. I have a big issue. My little brother got an iMac G3 as a present, to play basic games on it. It had MacOS 9.2.1 installed and the firmware was updated to the latest version. I installed MacOS X 10.4 and it worked flawlessly up

  • Help for conditional formatting of a chart query!!!!!

    Dear Gurus, can Anyone give me a step by step for conditional formatting on the chart? I want my charts in my queries to be for example: green color when actual data <= version, Yellow if actual > version & 101%, red if actual >=101%. Thank You very