How to get the latest procured value of a spare updated in material master

How to get the latest procured value of a spare updated in material master

J S S PRASAD
See table MBEW via transaction SE16.
However, you may need to look at the last PO created for that material.
PeteA

Similar Messages

  • How to get the latest screen value (of input field in VA01)

    Hi Experts,
    I have a problem that when I am in VA01 (create sales orders) I see the (old) default value of the Req.Deliv.Date
    (in Item Overview tab). I don't see the latest entered value.
    This is screen field RV45A-KETDAT.
    Eg When I enter VA01, I first enter the order type.
    In the next screen you will see that the Req.Deliv.Date has already an intial value (current date).
    Now when I change this field to Nov 14 2011, I will still see the delault current date (in PAI).
    Only much later, the program will adopt the new value (but this is too late for me).
    (I actually need the value in FM SD_PARTNER_ABLAD_SELECTION)
    How come and how can I retrieve the latest value?
    (I already tried FM DYNP_VALUES_READ but this didn't help)
    Please advice.
    Thanks very much!
    Guido

    Did you try DYNP_VALUES_READ like this
          PERFORM DYNP_VALUES_READ USING 'SAPMV45A'
                                   '4001'
                                    'RV45A-KETDAT'
                           CHANGING RV45A-KETDAT
                                    SY-SUBRC.
    try writing this where you need your values. This oerform already exists in VA01 code and is used in teh PAi for another field. So just try callign this with these values and see if it helps.

  • How to get the latest credit limit values per each customer in the report.

    Hi All,
    Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
    I have below requiremnt.
    I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
    This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
    So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
    one more thing these credit limits should roll up correctly at the HTR level.
    One HTR having number of customers .
    for example HTR 100 can have customer number 200,300,400.
    Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
    Example below :
    Cube DATA :
    HTR Customer Doct number Credit managment view
    100 200 10001 200
    100 200 10002 200
    100 300 10004 300
    100 300 10005 300
    100 400 10006 400
    100 400 10007 400
    100 400 10008 400
    Master data tabel (P Table)(Credit managment view)
    Credit managment view Credit limits
    200 1000.00
    300 50000.00
    400 90000.00
    Please remeber :
    We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
    one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .

    Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
    Now create a formula or CKF and use zcredit.
    This should display the credit limit in your report as normal key figure.
    I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
    Hope this helps.

  • How to get the latest creditlimits in the reporting

    Hi All,
    Can anybody give me an idea on how to  get the latest credit limit values per each customer in the report.
    I have below requiremnt.
    I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube  which is credit management view having all the customer numbers .
    This credit management view is master data info object having credit limit key figure as attribute.These credit limit  are per each customer.
    So we need these credit limits in the report  as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
    one more thing these credit limits should roll up correctly at the HTR level.
    One HTR having number of customers .
    for example HTR 100 can have  customer number 200,300,400.
    Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
    Example below :
    Cube DATA :
    HTR         Customer     Doct number  Credit managment view
    100            200                10001             200
    100            200                10002             200
    100            300                10004             300
    100            300                10005             300
    100            400                10006             400
    100            400                10007             400
    100            400                10008             400
    Master data tabel (P Table)(Credit managment view)
    Credit managment view       Credit limits
    200                                           1000.00
    300                                           50000.00
    400                                           90000.00
    Please remeber :
    We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
    one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .
    Edited by: sirisha Nekkanti on Oct 30, 2008 6:27 PM
    Edited by: sirisha Nekkanti on Oct 30, 2008 6:35 PM

    This is duplicate of
    how to get the latest credit limit values per each customer in the report.
    thread.

  • How to get the current month value for a customer exit variable?

    How to get the current month value for a customer exit variable? 
    And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
    Thanks!

    Hi Kevin,
    Check here........
    Re: Customer Exist for "From Current Date To Month End"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
    Cal month
    Regards,
    Vijay.

  • How to get the previoulsy selected value in a combobox

    How to get the previoulsy selected value in a combobox. i WANT the current and the previously selected value of the combobox.

    Just add to combobox ItemListener. When item is changing in itemStateChanged arrives 2 events. ItemEvent.DESELECTED and ItemEvent.SELECTED with corresponding item's values. Just write something like this:
            comboBox.addItemListener(new ItemListener() {
                Object prevValue;
                public void itemStateChanged(ItemEvent e) {
                    if (e.getStateChange() == ItemEvent.SELECTED) {
                        //do what you need with prevValue here
                    } else {
                        prevValue = e.getItem();
            });

  • How to get the latest versions of Internet Explorer t

    We are running Single Primary Site with SCCM 2012 R2. 
    I
    cant seem to find out how to get the latest versions of Internet Explorer to be included in software updates?  Do you have to download this separately and install manually?

    Like Henrik said, make sure you have the Classifications selected that you want to address. IE 11 is the current browser, that was added to the catalog a few months back. If you are searching for this month you wont find it.

  • How to get the anchor tag values in next jsp

    Hey all,
    I have two jsp files.
    in first jsp,
    I am getting the resultset.
    I am setting the resultset to the anchor tag.
    below is the code...
    <a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp"><%=rSet.getString(1) %></a></td>
    whenever he click on any anchor tag,
    It will goes to ACSMasterTwo.jsp page for edit the compleate record.
    how to get the anchor tag value in that page...
    Please help me on this.

    You have to pass a parameter. An id is good.
    Of course you have to get an id from somewhere in the result set right?
    <a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp?id=<%= rSet.getString("id") %>"><%=rSet.getString(1) %></a></td>Then you call
    request.getParameter("id");
    and look up the values related to that id in the database.

  • How to get the previous record value in the current record plz help me...

    In my sql how to get the previous record value...
    in table i m having the field called Date i want find the difference b/w 2nd record date value with first record date... plz any one help me to know this i m waiting for ur reply....
    Thanx in Advance
    with regards
    kotresh

    First of this not hte mysql or database forum so don;t repeate again.
    to get diff between two date in mysql use date_format() to convert them to date if they r not date type
    then use - (minus)to get diff.

  • How to get the latest update for the phone?

    hey does anyone know how to get the latest upgrade for my phone? 3230 nokia

    http://www.nokia.co.uk/nokia/0,,58162,00.html
    Gadget
    Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

  • HT1222 how I get the latest airport software update?

    How i get the latest airport software update?

    Marlon brown wrote:
    I been trying to get this update off my phone but can not
    I been trying to figure out what you're talking about but can not

  • How to get the all process orders and outbound deliveries based on material

    Hi Team ,
    I need one help from you regarding the MB 56 transaction.
    My doubt is : How to get the all process orders and outbound deliveries based on material, plant and batch?
    Please help me regarding this.
    Thanks & Regards,
    Srikanth.

    Hi,
    You can use ST05,to trace the program and find out,
    hope it will help you...
    thanks and regards,
    veera.

  • HT4972 i would like to know if you have to get the latest itunes on your computer to update your ipod to the latest version?

    i would like to know if you have to get the latest itunes on your computer to update your ipod to the latest version?

    Note that the 3G iPod can only go as high as 5.1.1
    The 6G to 6.1.5
    The 5G to the current 7.0.X
    Identifying iPod models

  • How to get the table of value field? and can we expand the technical limits

    Dear
    I have created value field in COPA with KEA6. And now, I need the table which the value fields are saved. Yet, I have tried a lot to find it and get failure? Can any guy help me? Please tell me how to get the table of a value field.
    And another question is that, can we extend the technical limits for the number of value field for ECC6.0?
    We have a note for R.4.x Please see below:
    OSS note 160892
    You can display the length of a data record using Transaction KEA0 ('Maintain Operating Concern'). After you have navigated to the 'Characteristics Screen' or to the 'Value field Screen' choose menu path 'Extras -> Technical Limits'.
    The maximum displayed here under 'Length in bytes on the DB' is the maximum length permitted by the Dictionary. The reserve required for the release upgrade must be subtracted from this value.
    To increase the allowed number of the value fields, increase the value that is assigned to field ikcge-bas_max_cnt (FORM init_ikcge_ke USING fm_subrc, approx. line 165) in Include FKCGNF20. It specifies the number of the possible value fields. The corresponding part of the source code is attached to the note as a correction.
    David Sun
    Regards!

    how to extend the limit of value numbers? please see the original question.

  • How to get the list of values for a dynamic parameter using Web Services SDK?

    <p>I am struggling to get the list of values for a dynamic parameter of a report.</p><p>I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.</p><p>First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?</p><p>Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.</p><p>Thx </p>

    <p>Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.</p><p>We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.</p><p>We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.</p><p>Please let me know if you can think of an alternative to look at.</p><p>Thanks a lot,</p><p>Catalin </p>

Maybe you are looking for

  • Logical database PTRVP

    hi All, I want to change the selection screen for logical database PTRVP, is it possible to change it without changing the database selection program ? I tried to look out for selection category for this LDB [ like HR LDBs] but dint find any. can you

  • Is Quality management module required to be used for vendor evaluation?

    Hi, There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are

  • Why can't i upgrade Adobe Acrobat 7.0 to 7.1.0???

    when i open adobe 7.0 standard and click help --> "check for updates now", it says there is one update available (Adobe Acrobat 7.1.0 Standard Update). it shows up on the right column "selected updates", but when i click the update button nothing hap

  • Mac and PC Networking together?

    I was wondering if this is normal, i am new to the mac world, just started using about two months ago. my whole job network is on pc i am the only one that is running on mac, whenever i send a PDF and Powerpoint presentation, etc... over the network

  • B2C scenario customer specific discount when customer login to the B2C site

    Hi E-Commerce gurus, We want to implement a customer specific discount scenario when the customer login to the B2C web site afterwards that easily see the customer specific discount as soon as duration of the login process. We have also succeed sales