How to get the list of employees whose full n final setellment done in mont
hi Experts,
We are trying to get the list of employees whose full and final settelemnt were done in a particular month.
Is there any way to get the employees whose fnf was done in a particular month.
Please advice.
Regards,
V Sai.
Hi Experts,
We are trying to get the list of employees from sap for whom we ran the FNF in the current month.
For example,if an employee left the organisation in the month of April,we are holding the salary of the employye.
After approvals from different departments,may be after 2 months we change the control record to april and we run the payroll for the employee.later we change the control record to current period. In posting we use the other period and maintain 01 2010 and post to accounts.
Here we want to extract the list of employees for whom we post the Full and final settelement in the particular month.
Please helpme to solve it.'
U r help is highly approciated.
Regards,
Sai.
Similar Messages
-
How to get the list of employees whose Sal on hold and who are active
HI Experts,
We are trying to extract a report,where the list of employees whose salary was hold and who are active in a particular month.
Please advice.
Regards,
V Sai.Hi,
I can think of two different solutions. You can choose the one as per the requirement.
1. Creating a report of locked employees as on date.
Active employee that are locked in Infotype 3.
As infotype 3 doesnt have different Begin data and end dates, we cannot have historic data/report.
2. Creating a report for payroll not run.
Getting a list of active employees
Check the RT of the employees for previous payroll runs.
You can use the selection criterila for dates/months.
Hope this helps.
Param -
How to get the list of materials from Sap r/3
Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khannaHi Khanna,
<i> 1. Should we create DT MT MI and all (OR) not</i>
Yes U need to create for HTTP site...for RFC U need to import..
<i>2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).</i>
You create your own structres for Request and respoce.. and Map it with RFC..
<i>3.Or the second thing is how to get the list of materials start with some alphabate.</i>
I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar. -
How to get the list of users who has access for list of tcodes.
How to get the list of users who has access for list of tcodes.
Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned. -
How to get the list of active devices in current wifi network?
Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + "<br>");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks -
How to get the list of database Views modifying the DB tools list tables.vi
Hi,
I have a problem, I just started using LabVIEW and in particular the LabVIEW connectivity toolkit and I am lookig fgor suggestion regarding how to get the list of database Views modifying the DB tools list tables.vi...
Thanks in advance,
MichelaHi Michela,
since the VI you want to modify is part of a Toolkit, I suggest you to copy the whole block diagram in a new VI and then save it in a new location.
Place the DB List Tables.vi on a block diagram, double click on it and go to the tab "Window -> Show Block Diagram "
Select "Edit -> Select All" to select the whole block diagram and select "Edit -> Copy"
Open a new VI and select "Edit -> Paste"
Save the new VI
In this way you can modify everything you want without overwriting the Toolkits VIs.
Hope this can help.
Regards,
Andrea N.
Systems Engineer ATE & RF - Mediterranean Region
National Instruments Italy -
How to get the list of Used Quotations & Non Used Quotations
Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.ok.
-
How to get the list of Quotations...???
Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.Hi Shailesh,
Thanks for the mail...
but the problem is different. ...i wanted a list of used quotations and not used quotations saparate list.
because we have same vendor for same material different price .
so when we create PO we should use Quotation only one time.
poen RFQ and closed RFQ is different .i means RFQ not at maintained in ME47. not at received the price from vendor or not at enterd the price. ... so that is different..
if the non used quotation will display in ME21N document overview it should be very usefull...
Thanks in advance.
Anthyodaya. -
How to get the list of component?
How to get the list of component through java API in Adobe CQ5?
There are probably more than a few ways, but here is a little component .jsp code that uses the jcr query api to pull out all the components and list them on a page. If I know CQ, there might be a way to ask for a list of components another way though, maybe through another API, or possibly a .json url, I might remember reading something about that, somewhere, lol, but this at least gets you the list in a somewhat simple way.
Code Example:
<%@include file="/apps/psul/components/global.jsp"%>
<%@ page import="javax.jcr.*,
javax.jcr.query.*"
%>
<%
// Login to create an anonymous session on the default workspace
Session session = resourceResolver.adaptTo(Session.class);
//Declare a query for all the components in the system
String SQL = "select * from cq:Component";
//side note: if you want just the components in your site area, then make the query more like below...
// SQL = "select * from cq:Component where jcr:path like '/apps/yoursitename/%'";
QueryManager qm = session.getWorkspace().getQueryManager();
Query query = qm.createQuery(SQL, Query.SQL);
QueryResult result = query.execute();
NodeIterator nodes = result.getNodes();
while (nodes.hasNext()) {
Node node = (Node)nodes.next();
%>
<p><%=node.getName() %> (<b><%=node.getPath() %></b>)</p>
<% } %> -
How to get the list of documents
Hi everyone
Can anyone help me How to get the list of documents residing in a folder of KM repository of SAP Netweaver using a simple java program
Thanks in ADV.
Rupesh KhemkaHi Rupesh,
I have written the code for you and it works with WebDynpro, no seperate java program is required.
Just try to paste it in your application code and run it.
try{
// Will check the user athentication for EP
IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
IUser sapUser = wdClientUser.getSAPUser();
com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
ResourceContext context = new ResourceContext(ep5User);
// The path in which your folder resides
RID rid1 =RID.getRID("/documents/Public Documents/SCAP/");
IResourceFactory factory1 = ResourceFactory.getInstance();
ICollection icollection = (ICollection)factory1.getResource(rid1, context);
IResourceList resourcelist = icollection.getChildren();
int size1 = resourcelist.size();
for(int s=0; s<listOfDocuments.getLength(); s++){
IResource resource = resourcelist.get(i);
InputStream input = new InputStream();
input = resource.getContent().getInputStream();
}catch(Exception e){
e.getMessage();
Once you get the InputStream everything else is possible....
This will surely help you in reading the documents from KM.
Regards,
Rekha Malavathu -
How to get the list of roles assigned to a user in all the child systems
how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM
Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta -
How to get the list of site collections in wss 2.0 and wss 3.0
Hi,
How to get the list of site collections in wss 2.0 and wss 3.0
Please provide related articles to me
Thanks in advanceUse 11 for wss 2.0 and 12 for wss 3.0
Go to :\Program Files\Common Files\Microsoft Shared\web server extensions\11\BIN\”
stsadm.exe -o enumsites -url <root url>
to get the list of site collections and
stsadm.exe -o enumsubwebs -url <root url>
to get the list of sub sites.
http://support.microsoft.com/kb/832807
http://ServerName/_layouts/1033/Siteusrs.aspx to manage permissions -
How to get the list of deployed projects in OSB through commond line
How to get the list of deployed projects in OSB through commond line; as we are able to get in weblogic.
You can go with standard JMX API using WLST
http://www.oracle.com/technology/sample_code/products/osb/index.html
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e15033/index.html
or you can try a little bit tricky way like
ls $DOMAIN_HOME/osb/config/core/ | grep -v ^_:-) -
how to get the list of only installed bundled software on mac os X through programmatically???
I think what you get is below;
App Store
Calculator
Calendar
Contacts
Dashboard
Dictionary
DVD Player
FaceTime
Font Book
Game Center
Image Capture
iTunes
Launchpad
Mail
Messages
Notes
Photo Booth
Preview
QuickTime Player
Reminders
Safari
Stickies
System Preferences
TextEdit
Time Machine
Twitter
Activity Monitor
AppleScript Editor
Audio MIDI Setup
Bluetooth File Exchange
Boot Camp Assistant
ColorSync Utility
Console
DigitalColor Meter
Disk Utility
Grab
Grapher
Keychain Access
Migration Assistant
Network Utility
RAID Utility
System Information
Terminal
VoiceOver Utility
X11
XQuartz
Note if you buy a new Mac with ML preinstalled the list may be larger. -
How to get the list of icc profile,which Photoshop loaded?
I am developing a automation plugin,but I do not know how to get the list of icc profile,which photoshop loaded.
I have read the log of "getter" and "Listener",and not find the way to get the list.Thank you for you answer.
I find a icc profile has a "internal name" which show in the color setting menu in photoshop and a "external name" which is the file name. And the "internal name" maybe different with "external name".
How I can get the "internal name" from the icc profile? I do not find the information in the ICC Profile Format Specification.
Thank you very much!
Maybe you are looking for
-
Itunes wont read iphone, thinks it's a digital camera...help
I dont know what happened, but when I first got my PC with vista 64, and had itunes installed with the iphone, everything worked. 3 days ago I reformatted my drives and reinstall windows and all my programs. I got itunes working with all my music and
-
Error: 12017 while updating e72 phone software
There is an error occured when i try to install new update of my E72. Then i tried to update using Nokia PC OVI suite, there is also an error like this: " There was a problem. Please restart nokia OVI suite and try again. If the problem persists, uni
-
HT4061 i need to turn off my iMessage but i don't have an iPhone anymore
im not getting any text messages from iphone users
-
How to display accounting periods in a fiscal year?
hi gurus, could you please tell me how to display accounting wise calculations like AP1, AP2 ... AP12 in a given fiscal year in Bex (BI7.0)? please tell me the logic? regards
-
IWeb losing, and then corrupting photos in Blog entries
I have an odd problem, and really need some help! I've been posting blog entries with pictures at the end of the text for many months now (over 150 entries), and only recently have run across this problem. After creating a new blog entry, I post the