How to get the list of values for a dynamic parameter using Web Services SDK?

I am struggling to get the list of values for a dynamic parameter of a report.I am using Java Web Services SDK ... I tried to use PromptInfo.getLOV().getValues() method but it does not work.First of all ... is this possible (to get the list of values for a dynamic param) using Web Services?Second of all, if this is possible, how should I do it ... it seems it works fine when running the report from CMC. It asks for DB logon info and after that it provides a list of values.Thx

Your assumption is correct. We are trying to get the LOVs from the Crystal Report. I was not aware that this is not supported by Web Services SDK.We used Web Services SDK to integrated the Crystal Reports in our web application. We implemented some basic actions for reports: schedule, view instances, run ad-hoc reports.We encountered this problem when trying to run/schedule reports with dynamic parameters (a list of values from DB). We were unable to get the LOVs.Please let me know if you can think of an alternative to look at.Thanks a lot,Catalin

Similar Messages

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to retrieve the username/password of logged user so to use web services

Hi Experts,
we are using web services from a web dynpro application, the web services we use are CAF web services; actually we are "hardcoding" username and password so to be able to execute these web services, using this code before calling the web service:
wdContext.currentRequest_ReporteDeRendicionDetallada_RElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY,"testuser");
wdContext.currentRequest_ReporteDeRendicionDetallada_RElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY,"testpassword");
but as this is not a very good practice, we want to replace the "testuser" with the logged user and, of course, retrieve the password and use it instead of "testpassword".
How can we achieve this? I couldn´t find any tips on this.
Best regards,
Marco.

Hello,
thanks for your anwsers, although I´ve followed both links I couldn´t find the answer to my problem.
I need to know how to retreive user and password from the UME of the portal so to be able to execute web services in the java stack, the UME is connected to a LDAP in our corporation.. so may be the passwords are not stored in the UME?
If it is not possible to retrieve the passwords of the users , which is the best practice to deal with username/passwords to execute CAF webservices from web dynpro java? Hardcoding is not a very good practice..
Best regards,
Marco.

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How to get a list of values used in the WHERE filter of stored procedures and functions in SQL Server

How can I get a list of values (one or more) used in the WHERE filter of stored procedures and functions in SQL Server?
How can get a list of values as shown (highlighted) in the sample stored procedure below?
ALTER PROC [dbo].[sp_LoanInfo_Data_Extract] AS
SELECT   [LOAN_ACCT].PROD_DT,
              [LOAN_ACCT].ACCT_NBR,
              [LOAN_NOTE2].OFCR_CD,
              [LOAN_NOTE1].CURR_PRIN_BAL_AMT,
              [LOAN_NOTE2].BR_NBR,
INTO #Table1
FROM
                dbo.[LOAN_NOTE1],
                dbo.[LOAN_NOTE2],
                dbo.[LOAN_ACCT]
WHERE
                [LOAN_ACCT].PROD_DT = [LOAN_NOTE1].PROD_DT
                and
                [LOAN_ACCT].ACCT_NBR = [LOAN_NOTE1].ACCT_NBR
                and
                [LOAN_NOTE1].PROD_DT = [LOAN_NOTE2].PROD_DT
                and
                [LOAN_NOTE1].MSTR_ACCT_NBR = [LOAN_NOTE2].MSTR_ACCT_NBR
                and
                [LOAN_ACCT].PROD_DT = '2015-03-10'
                and
                [LOAN_ACCT].ACCT_STAT_CD IN
('A','D')
                and
                [LOAN_NOTE2].LOAN_STAT_CD IN
('J','Z')
Lenfinkel

Hi LenFinkel,
May I know what is purpose of this requirement, as olaf said,you may parse the T-SQL code (or the execution plan), which is not that easy.
I have noticed that the condition values in your Stored Procedure(SP) are hard coded and among them there is a date values, I believe some day you may have to alter the SP when the date expires. So why not declare 3 parameters of the SP instead hard coding?
For multiple values paramter you can use a
table-valued parameter. Then there's no problem getting the values.
If you could elaborate your purpose, we may help to find better workaround.
Eric Zhang
TechNet Community Support

How to get the list of materials from Sap r/3

Hi Experts,
I have one doubt, here iam implementing
HTTP TO RFC scenario.
My doubts are------
1. Should we create DT MT MI and all (OR) not
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
3.Or the second thing is how to get the list of materials start with some alphabate.
Please reply me for each and every questions mentioned above. Please clarify me.
Helpful answers wil be rewarded.
Reagards
khanna

Hi Khanna,
 1. Should we create DT MT MI and all (OR) not
 Yes U need to create for HTTP site...for RFC U need to import..
2.In Request DT how the message structure wil be to get the list of materials from sap r/3 system as Response(Ex: Fields in the source structure).
 You create your own structres for Request and respoce.. and Map it with RFC..
3.Or the second thing is how to get the list of materials start with some alphabate.
 I think it will come with acending order....
for more help go through this link
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
regards,
Ansar.

How to get the list of active devices in current wifi network?

Hi All,
I am going to a start a new Network based app. So please any one give me an idea on the below question.
How to get the list of active devices in current wifi network?

Nope I want the log-in user to retrieve its Group where he is belong. I have this following code
strUsername = Request.getParameter("username").toLowerCase().trim()+"@dev.test.com.ph";
strPassword = Request.getParameter("password").toLowerCase().trim();
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, INITCTX);
env.put(Context.PROVIDER_URL, MY_HOST);
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL,strUsername);
env.put(Context.SECURITY_CREDENTIALS, strPassword);
// enable tracing
env.put("com.sun.naming.ldap.trace.ber", System.err);
// Create the initial context
DirContext initCtx = new InitialDirContext(env);
// Get the target context
DirContext targetCtx = (DirContext)initCtx.lookup("");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
// Perform the search on the target context
NamingEnumeration enum = targetCtx.search("","(userPrincipalName="+strUsername+")",constraints);
javax.naming.directory.Attributes attrs;
NameClassPair item;
String[] attrIds = new String[]{"MemberOf"};
// For each answer found, get its "Groups" attribute
// If relative, resolve it relative to the target context
// If not relative, resolve it relative to the initial context
while (enum.hasMore()) {
item = (NameClassPair)enum.next();
Out.println(item);
attrs = targetCtx.getAttributes(item.getName(), attrIds);
Out.println(attrs + " ");
initCtx.close();
It returns all this string :
{memberof=memberOf: CN=CMCanadaRD,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=iMngrCanadaRW,OU=Groups / Teams,DC=dev,DC=test,DC=com,DC=ph, CN=Domain Users,CN=Users,DC=dev,DC=test,DC=com,DC=ph, CN=Backup Operators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph, CN=Administrators,CN=Builtin,DC=dev,DC=test,DC=com,DC=ph}
How can i retrieve the Group named CMCanadaRW and CMCanadaRD on the Attribute?
Thanks

How to get the list of Quotations...???

Hi MM Gurus,
How to get the list of Used Quotations & Non Used Quotations.
i am not talking about Open quotation ,closed quotation..
if once i created PO through quotation it should be used quotation. i not created PO through quotation
it s should be Non used quotation. how to get this list through when we create PO through ME21N
document over view. is there any opetion in Dynamic selection or somthing ..???
Thanks in Advance..
Anthyodaya.

Hi Shailesh,
Thanks for the mail...
but the problem is different. ...i wanted a list of used quotations and not used quotations saparate list.
because we have same vendor for same material different price .
so when we create PO we should use Quotation only one time.
poen RFQ and closed RFQ is different .i means RFQ not at maintained in ME47. not at received the price from vendor or not at enterd the price. ... so that is different..
if the non used quotation will display in ME21N document overview it should be very usefull...
Thanks in advance.
Anthyodaya.

How to get the list of component?

 How to get the list of component through java API in Adobe CQ5?

There are probably more than a few ways, but here is a little component .jsp code that uses the jcr query api to pull out all the components and list them on a page. If I know CQ, there might be a way to ask for a list of components another way though, maybe through another API, or possibly a .json url, I might remember reading something about that, somewhere, lol, but this at least gets you the list in a somewhat simple way.
Code Example:
<%@include file="/apps/psul/components/global.jsp"%>
<%@ page import="javax.jcr.*,
 javax.jcr.query.*"
%>
<%
 // Login to create an anonymous session on the default workspace
 Session session = resourceResolver.adaptTo(Session.class);
 //Declare a query for all the components in the system
 String SQL = "select * from cq:Component";
//side note: if you want just the components in your site area, then make the query more like below...
// SQL = "select * from cq:Component where jcr:path like '/apps/yoursitename/%'";
 QueryManager qm = session.getWorkspace().getQueryManager();
 Query query = qm.createQuery(SQL, Query.SQL);
 QueryResult result = query.execute();
 NodeIterator nodes = result.getNodes();
 while (nodes.hasNext()) {
 Node node = (Node)nodes.next();
 %>
 <%=node.getName() %> (<%=node.getPath() %>)
<% } %>

How to get the list of documents

Hi everyone
Can anyone help me How to get the list of documents residing in a folder of KM repository of SAP Netweaver using a simple java program
Thanks in ADV.
Rupesh Khemka

Hi Rupesh,
I have written the code for you and it works with WebDynpro, no seperate java program is required.
Just try to paste it in your application code and run it.
try{
 // Will check the user athentication for EP
 IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
 IUser sapUser = wdClientUser.getSAPUser();
 com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
 ResourceContext context = new ResourceContext(ep5User);
 // The path in which your folder resides
 RID rid1 =RID.getRID("/documents/Public Documents/SCAP/");
 IResourceFactory factory1 = ResourceFactory.getInstance();
 ICollection icollection = (ICollection)factory1.getResource(rid1, context);
 IResourceList resourcelist = icollection.getChildren();
 int size1 = resourcelist.size();
 for(int s=0; s<listOfDocuments.getLength(); s++){
 IResource resource = resourcelist.get(i);
 InputStream input = new InputStream();
 input = resource.getContent().getInputStream();
}catch(Exception e){
 e.getMessage();
Once you get the InputStream everything else is possible....
This will surely help you in reading the documents from KM.
Regards,
Rekha Malavathu

How to get the list of roles assigned to a user in all the child systems

how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
Krysta

How to get the list of site collections in wss 2.0 and wss 3.0

Hi,
How to get the list of site collections in wss 2.0 and wss 3.0
Please provide related articles to me
Thanks in advance

Use 11 for wss 2.0 and 12 for wss 3.0
Go to :\Program Files\Common Files\Microsoft Shared\web server extensions\11\BIN\”
stsadm.exe -o enumsites -url <root url>
to get the list of site collections and
stsadm.exe -o enumsubwebs -url <root url>
to get the list of sub sites.
http://support.microsoft.com/kb/832807
http://ServerName/_layouts/1033/Siteusrs.aspx to manage permissions

How to get the list of icc profile,which Photoshop loaded?

I am developing a automation plugin,but I do not know how to get the list of icc profile,which photoshop loaded.
I have read the log of "getter" and "Listener",and not find the way to get the list.

Thank you for you answer.
I find a icc profile has a "internal name" which show in the color setting menu in photoshop and a "external name" which is the file name. And the "internal name" maybe different with "external name".
How I can get the "internal name" from the icc profile? I do not find the information in the ICC Profile Format Specification.
Thank you very much!

How to get the list of top 10 tables grown last week or last few days

Hi All,
Please let me know, how to get the list of top 10 tables grown last week or last few days
Thanks

Please let me know, how to get the list of top 10 tables grown last week or last few days1.Oracle Version and OS info please ... ALWAYS
2.Do you have licensing options (Tuning and/or Diagnostics Pack) ?
3.Have you ran AWR/Statspack in last week or last few days
1.Because Oracle do not store auto tack the history of tables growth. See below link where one user has showed the possible way of manual track of table(s) growth :
Re: oracle tables growth
2.MOS Note for How To Get Table Growth History Information? [ID 1395195.1]
3.If you are in 10g than EM of 10g has something called Segmnet Statistics which can show you the growth of your table.
4.Other clue :
SQL> select * from table (dbms_space.object_growth_trend('SCOTT','EMP','TABLE'));
TIMEPOINT SPACE_USAGE SPACE_ALLOC QUALITY
17-SEP-12 11.06.20.228000 AM 1593 65536 GOOD5.A good script by Mice Ault for historical growth of segments within AWR:
http://www.dba-oracle.com/t_table_growth_reports.htm
Regards
Girish Sharma

How to get the list of unviewed Instances?

Hi All,
Can anyone tell me how to get the list of unviewed instances?
I want to get all the instances which have been scheduled but not viewed.
Please help me on this.
I tried to get the info from audit report but i could not able to achieve it.
is it possible from query builder?
Thanks,
Nagaveni

Hi Ravi,
Thank you for the reply!!
Then it is not possible to get the unviewed reports.
how does it work if i create a audit report with Viewed status and list of all instances then we can filter out the unviewed reports.
Does above solution is going to work?
i have not tried yet, seeking your opinion.

How to get the list of values for a dynamic parameter using Web Services SDK?

Similar Messages

Maybe you are looking for