How to get the logged in user to accept remote management
Hi,
It possible to have the currently logged in user to accept or reject a Remote Desktop connection?
The reason is that the remote administrator taking control should not be able to see the currently logged in user without him knowing it. I know about the "being observed" icon but that's not enough.
I want the remote administrator to be able to work freely when no users are logged in but if a user is logged in, I want some kind of request/validation-or-rejection mechanism before the remote desktop administrator can take control of the mac.
Is that possible?
Ludo
ARD supports both modes that you desire... The problem, as I recall, is that these are "all or nothing" switches you get one way, or the other, but you can't have it both ways.
The controls for these options lie behind the "Computer Settings..." button in the Sharing Prefs panel.
"Anyone may request permission to control the screen"
and
"VNC viewers may control the screen with password:"
Similar Messages
-
How to get the logged in userId value in adf task flow OIM11g R2
Hi,
I have created an adf task flow. Now I want to run some query in that based on the logged in userId.
Could you please help me in knowing how to get the logged in userID value in adf TaskFlow so that I can run a parameterized query.
Thanks3 different ways to retrieve the username (not sure what you mean by user ID) :
http://mahmoudoracle.blogspot.be/2012/06/adf-get-current-logged-user-name.html#.USI_c-h8zIo
Also provide your JDev version.
Basicly, you should use the groovy expression in a view criteria (it's the fastest and easiest way) and call that view criteria whenever you need it.
That's if you are using ADF BC of course. -
OIM11gr2 - How to get currently logged in user details using oim api
Hi All,
I have a requirement to retrieve currently logged in users profile in the process adapter.
I have tried with getSelfProfile in tcUserOperation and also ContextManager.getOIMUser API's however, in both the cases i am getting xelsysadm details only.
Also as know request details in Process task mapping doesnot work for OIM11g onwards (its returning column not found exception )
DOes any one has idea how to achieve this.
PS. - i am using platform to retrieve API's.
Thanks & Regards
Swati PandeyYou can get the logged in user name using the below java code:
ADFContext adfCtx = ADFContext.getCurrent();
SecurityContext secCntx = adfCtx.getSecurityContext();
String user = secCntx.getUserPrincipal().getName();
HTH -
How to get the active application users IP address in R12 by sql command
Hi ,
I need to know how to get the active application users IP in R12 by sql command
in order to kill any session by the IP address ?
Am working on 12.1.3 Application
And 11.2.0.3 Oracle Database
Thanks936921 wrote:
Am still couldn't found the IP address for the connected Application users.
If there any select statement can help me with that?
Really? Then how do you explain me finding the following docs from the links I referenced above?
How To Find The IP Address Of The Client Machine From Where A Particular Forms User Is Connected ? (Doc ID 879092.1)
How to Track IP Address of the Form Session in Oracle application 11i (Doc ID 878931.1)
Where to find the Client IP Address for a Client in E-Business Suite? (Doc ID 1258415.1)
How To Get The terminal ID For The Machine From Which A User Is Logged To E-Business Suite Applications (Doc ID 751658.1)
Thanks,
Hussein -
How to get/capture log-on user name on PC (work station)
Hi,
Colud anyone give me how to get/capture log-on user name on my PC (work station)?
I need to get the infomation by using a function module.
Kind regards,
HisaoHi,
TH_USER_INFO shows me terminal ID, IP address and other information. howerver it does't show me log-on user name of OS.
Kind regards,
Hisao -
How to get the list of users who has access for list of tcodes.
How to get the list of users who has access for list of tcodes.
Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned. -
How to get the room id & user id in our component
Hi Experts,
Collaboration -> Rooms -> Room Directory
It will show the available rooms
Select restricted room tab in that.
That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the Request Membership option. Then it will send the mail to the owner of the room.
In that UI commend they mapped with the roomid and userid.
I need to know how to get the room id & user id in our component.
How to get the Room Id dynamically?
Can anybody help me for this?
Helpful answers will appreciate.
Thanks and Regards,
Kathiresan RHi Kathiresan,
you can get the Room ID and the User ID over the API.
Getting User ID within WebDynpro application:
IUser user = WDClientUser.getCurrentUser().getSAPUser();
String logonId = user.getUniqueId();
Getting User ID within custom Portal Component:
IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
IUser user = request.getUser();
String logonId = user.getUniqueId();
Getting Room Id of a user who belongs to this room:
IUser user = request.getUser();
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
String roomId = "";
for (int i=0; i<myRooms.length; i++) {
IRoom room = myRooms<i>;
if (room.getName.equals('nameOfRoomToFind')) {
roomId = room.getId();
Greets
Denis -
How to get the logged in userId value in adf task flow
Hi,
I have created an adf task flow and deployed the same in application as an adf library.
Now I need to get the Logged in User ID value in the adf task flow which I created.
Based on this userid I need to run query to fetch the data related to the user from the database.
Please help/guide me to solve this issue.3 different ways to retrieve the username (not sure what you mean by user ID) :
http://mahmoudoracle.blogspot.be/2012/06/adf-get-current-logged-user-name.html#.USI_c-h8zIo
Also provide your JDev version.
Basicly, you should use the groovy expression in a view criteria (it's the fastest and easiest way) and call that view criteria whenever you need it.
That's if you are using ADF BC of course. -
How to get the ESS & MSS users in ECC 6.0 into portal
Hi Experts
How to get the ESS & MSS users in ECC 6.0 into portal
Thanks
DayaHi,
You need to have SSO in between ECC and portal and use ABAP engine as your UME.
then ECC users can directly login to portal using the same user id and password.
Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
Thanks,
gopal -
How to get the EBS login user id from a current Logged User
Hi,
I need to get particular Logged user's User ID & filter out his business group id to taken it as the concurrent input parameter.
this can be done through a value set if i know logged user's user id but i have no idea how to find the logged user's user id.....!!
i get user id such SessionMgr,fnd_profile API's???
any suggetions appreciable...
Regards,
D f o r z
Edited by: Dforz on May 5, 2011 10:40 PMBy CO Gyan means OAF Controller. Are you sure your question is related to OA framework forums.
Let us know where exactly in OAF you want to capture these ids and pass it to concurrent program.
I think you should post your question to below forum
General EBS Discussion
Thanks
AJ -
DBMS_DATAPUMP; how to get the log file of a job?
Hi
I want the user to be able to see the logfile of his job from another session.
this is my procedure
create or replace procedure get_job_log (p_job_name IN varchar2 )
is
hdl_job number;
l_job_state VARCHAR2 (20);
l_status sys.ku$_Status1010;
l_job_status sys.ku$_JobStatus1010;
l_job_logentry sys.ku$_LogEntry1010;
l_job_logline sys.ku$_LogLine1010;
begin
hdl_job := DBMS_DATAPUMP.ATTACH(
job_name => p_job_name
,job_owner => 'CLONE_USER'
DBMS_DATAPUMP.GET_STATUS(
handle => hdl_job
,mask => dbms_datapump.ku$_status_job_error + dbms_datapump.ku$_status_job_status + dbms_datapump.ku$_status_wip
--,timeout => 15
,job_state =>l_job_state
,status =>l_status);
l_job_logentry:=l_status.wip ;
for x in l_job_logentry.first .. l_job_logentry.last loop
dbms_output.put_line (l_job_logentry(x).LogText) ;
end loop;
dbms_datapump.detach(hdl_job);
end;
/when I run it for the first time, it works... kindof...
but my problem is that if I try running it again I get:
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 902
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3407
if I close sqlplus session , open new one and run - it works. So what is the issue here? Is detach not enough? What else should I do?
my version is 11.1.0.6
UPDATE.
Looks like the above is not true. It doesn't error if it runs to the end of code... The problem seems to happen only when exception occures and .detach is not called. So this is not an issue anymore.
But I still don't get a decent performance from the .get_status function. Sometimes it just hangs and errors on timeout.
Still the question is: How can I get the LOG of the session using DBMS_DATAPUMP from another session and output it on the screen?...
Edited by: Andrei Kübar on Dec 23, 2011 12:44 PM
Edited by: Andrei Kübar on Dec 23, 2011 12:57 PMI believe I found a solution
I am now running the above code only 1 time but in a loop and inserting output into a table, so that user can query the table and see where the job is
here's the code I'm using (partially copied from http://psoug.org/reference/dbms_datapump.html)
l_job_state:='UNDEFINED';
while (l_job_state != 'COMPLETED') and (l_job_state != 'STOPPED') loop
DBMS_DATAPUMP.GET_STATUS(
handle => hdl_job
,mask => dbms_datapump.ku$_status_job_error + dbms_datapump.ku$_status_job_status + dbms_datapump.ku$_status_wip
--,timeout => 15
,job_state =>l_job_state
,status =>l_status);
if (bitand(l_status.mask,dbms_datapump.ku$_status_wip) != 0) then
l_job_logentry:=l_status.wip ;
if (l_job_logentry is not null) then
for x in l_job_logentry.first .. l_job_logentry.last loop
--dbms_output.put_line (l_job_logentry(x).LogText ) ;
writelog (l_job_logentry(x).LogText );
end loop;
end if;
end if;
if (bitand(l_status.mask,dbms_datapump.ku$_status_job_error) != 0) then
l_job_error :=l_status.error ;
if (l_job_error is not null) then
for x in l_job_error.first .. l_job_error.last loop
dbms_output.put_line (l_job_error(x).LogText) ;
writelog('Error: '|| l_job_error(x).LogText) ;
end loop;
end if;
end if;
--dbms_output.put_line ('Current job state: '||l_job_state);
writelog ('Current job state: '||l_job_state);
end loop;thanks all for your help -
How to determine the logged in user - BI Publisher
Hi,
I am building a SQL based BI Publisher report. I am using BI Publisher integrated with the E-Business Suite so all ebiz users can log in to BI Publisher
I have a requirement that my parameter LOV query is to be restricted based on the BI publisher logged in user. I have the necessary select statement which just requires the logged in user to be supplied. But I don't know if there is any standard BI variables which I can use in my SQL Query
Thanks
Shasik
Edited by: Shasik on Sep 14, 2008 1:04 AMHi Shashi,
http://winrichman.blogspot.com/2008/09/how-to-get-logged-in-obiee.html
Use the available XDO session variables like :xdo_user_name
Select :xdo_user_name from dual wil fetch you , the Logged in USER :) -
How to get current logged-in user name in data access driver or in universe
In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?I do not know your EJB Service. But you should pass the credentials of the current logged on portal user to your service. That's not by default I think.
I had a similar problem with CAF developed webservices. I had to turn on permission checks in my web service and passed the credentials via logon ticket.
Regards, Bernd -
How to get the log information when using a class?
Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
private static final Log LOG = LogFactory.getLog(AClass.class);
public void logit(){
LOG.debug("This is the debugging log.");
public class AClass{
public static void main(String[] args) {
LogClass l=new LogClass();
l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know. -
How to get current logged in user's star rating in SharePoint 2013
Hi,
Currently, I am developing a custom web part to show star rating for documents, everything is done.
However,when user hover on the star I want a tooltip message("Your current rating is 1..."), similar to what we have
in libraries(or what the sharepoint by default provides in libraries) . So can I get the user specific rating depending upon
the logged in user using code(.net or CSOM anything will work)using the below code you can get the rated by user along with the rating , it's easier to just notify the user that her already rated the document
var acontext = new SP.ClientContext.get_current();
var lists=acontext.get_web().get_lists();
var l =lists.getByTitle("Documents"); //your document libraty
var aitem=l.getItemById(27);//Item id
acontext.load(aitem, "RatedBy", "ID", "Ratings");
acontext.executeQueryAsync(function(){
var RatedBy= aitem.get_item('RatedBy');
if (!SP.ScriptHelpers.isNullOrUndefined(ratings)) {
for (var i = 0; i < RatedBy.length; i++) {
var user = RatedBy[i];
if (user.get_lookupId() == _spPageContextInfo.userId) {
//show that you already rate it
break;
},function(s,e){alert(e.get_message());});
another way is to use CAML query to check if the current user id is within the RatedBy multi user field
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010
Maybe you are looking for
-
The document could not be printed...
I have users that seem to encounter the following errors on a regular basis. No, it does not occur on every multipage PDF file, however it happens frequently. When attempting to print multi-page documents - we receive the following errors: The docu
-
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
HT1688 messed up messages after update
My phone is not typing messages correctly after the update. It has at least a 15 second delay and some times it take minutes to type messages. Is there anything to do to correct this? It is very frusterating.
-
Workaround for the Firefox height="100%" bug
Hi, Does anyone have a workaround / solution to the bug which affects Firefox which means you can't specify height=100% in the wrapper? The one which means you have to specify an absolute height. Maybe even better - does anyone know when it's getting
-
I'm using SAP B1 8.82 PL04. It seems that I changed something in my SAP folders and files. The thing is that SAP help file doesn't work properly with F1 function key. For the help file, the left menus are fine, but the right contents doesn't read. Th