How to get the Macbook app which sends camera images back if someone steals it

There was a story run in a UK paper this week of someone who recovered their stolen Macbook because he had a programme on it that activated the camera when the laptop was in use, it then relayed the stills and moving pictues back to him and the theif was clearly identified!
Anyone know how to get this??
AJ

http://www.orbicule.com/undercover/mac/index.html

Similar Messages

How to get the form name which is used in standard tcode like me23n in sap

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

How to get the Checked box which are clicked

for(int k=0;.....
jsp code
<input type=checkbox name=checkbox value='<%=k%>' >
how to get the particular Checkbox which are checked???

String[] checkedValues = request.getParameterValues("checkbox");You'll get an array filled with the values only for the checked boxes. In other words, if no boxes are checked, checkedValues will be null or checkedValues.length == 0, not sure, going from memory.
Hope this helps!
Patrick

How to get the kerning value and set it to back use script?

hi,guys
I come back again.
I encountered a kerning problem.
how to get the kerning value and set it to back use script?
Thanks very much!

For both cases, the filename can be found on the FILE.ReceivedFileName Context Property. You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

How to get the PDF data which i have send to Spool

Dear Freinds,
               My requirement is to display the output which iam getting from a custom report(ZSALARY) in the form of PDF . So now i wanted to display the ALV output on to my desktop (as of now) in PDF format.
i have done the below coding please correct me why iam not getting the same data which is coming out of my report in the PDF, iam passing the same internal table.
IF NOT it_final[] IS INITIAL.       -
>IT_FINAL is my main internal table in the report ZSALARY
      DATA : count TYPE syprcop,
         days TYPE sypexpi,
         params TYPE pri_params,
         valid TYPE c,
      pdf_table TYPE rcl_bag_tline,
      spoolid TYPE rspoid,
      pdf_fsize TYPE i.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZSALARY'   -
tHIS IS MY REPORT NAME
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        WRITE : 'hi this is the test for spool'.
        NEW-PAGE PRINT OFF.
        COMMIT WORK.
        WRITE : / 'The Spool no is ', sy-spono. "system variable for spool no
        spoolid = sy-spono   .       -
At this point i can see the spool no.
        CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
            no_dialog     = 'X'
          IMPORTING
            pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
if i go and on my desktop it is saying the below error "ADOBE READER COUDNT OPEN 'test.pdf'
because it is either not supported file type or because the file has been damaged.
my aim is to get the data which is there in IT_final in the PDF .....please correct me the parameters which i have given wrong. my doubt is in GUI_download fM in the tables should i pass it_final or
the pdf_table coming from'CONVERT_ABAPSPOOLJOB_2_PDF'...... i tried this option iam able to open and it is just giving message which i kept before this FM i.e WRITE : 'hi this is the test for spool'.
what i should to get my internal table data.
Pls help.
regards
srinivas.

Dear Karthik,
          Thank you for giving me the link there by iam able to get the ouput download int he pdf
as below code , but now a small problem for me .......i have 10 fileds in the Report ouput ....but however in the pdf output i can see only 8 fields and the two fields got truncated . Could you please tell me what
i have to change in my below code so that i can get all the values
IF NOT it_final[] IS INITIAL.
data : it_tsp01 type standard table of tsp01,
       l_wa_tsp01 type tsp01.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZHR_BON'
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
SUBMIT (sy-repid) TO SAP-SPOOL
                 SPOOL PARAMETERS mstr_print_parms
                 WITHOUT SPOOL DYNPRO
                WITH pnppernr = p0001-pernr
                 AND RETURN.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
             no_dialog     = 'X'
             DST_DEVICE = params-PDEST
           IMPORTING
           pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize            = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = pdf_table    "it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
Please tell me how i can get the all the fields which are there in my normal alv output ......
Case 1) .i wanted all the 10 fields in PDF to be displayed without truncated , I have checked in Spool ........ i found all the fields are there .....but however when i check the downloaed PDF i can see some fields are getting truncated.
Case 2) However if on the ALV output if the user hides 2 fields out of 10 fields then only 8 feilds which are appearing on the output before sending the Spool should only be displayed in PDF as well -
> for this scenario what i have to do.
Thanks Once again.
regars
srini.

How do get the free apps such as pages numbers etc which come with my new iPod touch

How do I get my free apps which come with my new iPod touch such as pages, numbers etc

Just go to the App store and try to purchase them They should be free if:
GarageBand is free on the App Store for all iOS 7 compatible devices; additional GarageBand instruments and sounds are available with an in-app purchase. iPhoto, iMovie, Pages, Numbers, and Keynote are free on the App Store for qualifying iOS 7 compatible devices activated on or after September 1, 2013. See www.apple.com/ios/whats-new/ for iOS 7 compatible devices. Downloading apps requires an Apple ID.
copied from http://www.apple.com/ipod-touch/specs.html

How to get the last wbs which is displayed in transaction code cj03?

Dear Experts,
   I want to get the last wbs which are displayed in transaction code cj03, i have written below program,but i found it is incorrect. because the sort of wbs in cj03 is not equal to table prps. the last wbs in cj03 is not equal to table prps.
who can tell me how to get last wbs which is displayed in cj03?
SELECT
     PRPS~STUFE
     PRPS~POSID
     PROJ~POST1
     INTO CORRESPONDING FIELDS OF TABLE WA_PRPS_TEMP FROM PRPS INNER JOIN PROJ ON PROJPSPNR = PRPSPSPHI
     WHERE PROJ~PSPID EQ P_PROJECT.
WA_TLINE = LINES( WA_PRPS_TEMP ).
READ TABLE WA_PRPS_TEMP INDEX WA_TLINE.
IF WA_PRPS_TEMP-POSID = P_lastWBS.
    P_LAST = 1
endif.
Best Regards,
Merry

Hi Merry ,
The WBS elements are stored in the table PRPS , so please try using the conversion exit and use the data in internal format then use it in the IF condition.
Check the FM CONVERSION_EXIT_ABPSN_INPUT and CONVERSION_EXIT_ABPSN_OUTPUT
Regards,
Arun

How to get the macbook air by students discount in pune , maharashtra india

I want to buy macbook air 2013 128 gb i5 13 inch by student discount
please tell me how to get the discount in pune , india.

There is some information regarding this topic at Apple (india) pages.
http://www.apple.com/in/buy/
•Are Educational discounts available?
Education
To get discounts for Education, call Sales on 1800 425 4646 (toll free)
or 080 2574 4646, SMS "SALES" to 54646 or email [email protected]
Hopefully this helps you...
Good luck & happy computing!

How to get the US app store access for iPhone?

Hey. I moved to the US 6 months ago and I would like to connect with the US appstore with my iPhone. Even though I provide a US mastercard and a US address, I get a notification that my session has timed out with the code 5107. I need some US apps and as I live here and provide a US payment method I don't understand why I can't change it. How can I get the US app store access?

You could go to he Expresslane: https://Expresslane.apple.com and iTunes and iTunes Store for help.

How to get the time length from send record command to record video really?

I have two buttons. Record/Stop
I press Record button to record the video and press Stop
button to stop recording.Now,I spend 1986 ms from press Record
button to press Stop button.
But the flv file's length is 1920 or 1910 or 1915 ms.
So I want to get the time length from send record command to
record video really.
Can you give me some suggests.
Thanks!

maybe you have lag in publishing.... are you try watch de
NetStream.liveDelay() method?
or start counting when NetStream.onStatus has
"NetStream.Record.Start" and "NetStream.Record.Stop" in information
objects....

Is it possible to get the URL from which user came to Apex Application?

Hi,
I have 1 web site which is created by Apex. And I have to create similar sites with slight differences. For example, even though the contents are almost same, each telephone # have to be modified.
So, if possible, I want to use only 1 web site and depending on the URL from which user came, change some information on the page. Is it possible?
And if it is possible, what if the user set Apex URL as favorite and visit it after some days?

Thank you Scott,
This is the one.
But I have another issue.
If a user comes to our page from their link directly, I can identify where he come from. But if he added our site to Bookmark and comes to our site through the link, is it possible to identify his original route?
If it is impossible, I will create other Apex Application and put each URL to the link in order to catch where the user is from.

HOW TO GET THE MACBOOK PRO 13" TO RUN ON THE 1440x900 RESOLUTION

Hey guy, this is not a question bu more of an answer. I have read many forums with people wanting to up there res on the macbook pro from 1280x800 to something higher. i got my 13" MAcbook pro mid 2012 to run on the 1440x900 although its blurry and this is how. Firstly you want to download and instal switchresX. open the app go into last option (colour lcd), go to the custom resolution tab, click the + button on the buttom left, the at the top chage the option to scaled resolution, change the res to horizontal: 1440 and vertical:900. click ok then apply now experimental. reboot your make go into system preferences, display, scaled and select the one you just created. All done .

Your best option would be to sell yours and buy a used, unscratched model. A case replacement by apple is going to cost a small fortune.

How to get the account numbers which maintains negative balance for consecutive 5 days

Here is what I am trying to do
I am trying to get the accounts which has negative balance consecutively for five days
Here in this a/c 1 and 5 has consecutive negative balance
how to pull these accounts using sql query.
create table #p(cal date, ac# int, bal int)
insert into #p values ( GETDATE(), 1, -1),
( GETDATE(), 2, 1),
( GETDATE(), 3, 1),
( GETDATE(), 4, -2),
( GETDATE(), 5, -6),
( GETDATE()-1, 1, -1),
( GETDATE()-1, 2, 1),
( GETDATE()-1, 3, 1),
( GETDATE()-1, 4, 2),
( GETDATE()-1, 5, -7),
( GETDATE()-2, 1, -2),
( GETDATE()-2, 2, -1),
( GETDATE()-2, 3, -1),
( GETDATE()-2, 4, 2),
( GETDATE()-2, 5, -6),
( GETDATE()-3, 1, -2),
( GETDATE()-3, 2, -1),
( GETDATE()-3, 3, -1),
( GETDATE()-3, 4, 2),
( GETDATE()-3, 5, -2),
( GETDATE()-4, 1, -4),
( GETDATE()-4, 2, 1),
( GETDATE()-4, 3, 1),
( GETDATE()-4, 4, -2),
( GETDATE()-4, 5, -2),
( GETDATE()-5, 1, -4),
( GETDATE()-5, 2, 1),
( GETDATE()-5, 3, 1),
( GETDATE()-5, 4, 2),
( GETDATE()-5, 5, -1)
-- drop table #p

@ Jing
Again not sure if it is ok to comment on other people's answers, I hope you don't take it the wrong way, but your query will not account for CONSECUTIVE days. E.g. if the acc balance goes back to a positive value, day count must be reset.
Now I understand why people answered this so much faster than me LOL.
Edit: Besides, the requeriment for the acc being returned is that its value was negative for 5 days (120 hours). When a given account balance first switches to a negative value, it has 0 hours in that state. It all add a day to its "negative balance consecutive
day count" property the next time its value is checked (cal + 1). With that said, if your query worked, it would be cnt > 6 not cnt > 5.
Thanks for pointing the issue. I have improved my query to address it.
I try to come up with something to my understanding to the questions. It may not interpret right from the question itself for various reasons. I still consider it is a great learning experience. Thank you for your comments.
create table #p(cal date, ac# int, bal int)
insert into #p values ( GETDATE(), 1, -1),
( GETDATE(), 2, 1),
( GETDATE(), 3, 1),
( GETDATE(), 4, -2),
( GETDATE(), 5, -6),
( GETDATE()-1, 1, -1),
( GETDATE()-1, 2, 1),
( GETDATE()-1, 3, 1),
( GETDATE()-1, 4, 2),
( GETDATE()-1, 5, -7),
( GETDATE()-2, 1, -2),
( GETDATE()-2, 2, -1),
( GETDATE()-2, 3, -1),
( GETDATE()-2, 4, 2),
( GETDATE()-2, 5, -6),
( GETDATE()-3, 1, -2),
( GETDATE()-3, 2, -1),
( GETDATE()-3, 3, -1),
( GETDATE()-3, 4, 2),
( GETDATE()-3, 5, -2),
( GETDATE()-4, 1, -4),
( GETDATE()-4, 2, 1),
( GETDATE()-4, 3, 1),
( GETDATE()-4, 4, -2),
( GETDATE()-4, 5, -2),
( GETDATE()-5, 1, -4),
( GETDATE()-5, 2, 1),
( GETDATE()-5, 3, 1),
( GETDATE()-5, 4, 2),
( GETDATE()-5, 5, -1),
( GETDATE()-6, 5, -1)
--update #p
-- set bal=-1*bal
-- where cal='2014-09-22' and [ac#]=5
;with mycte as ( Select *
,row_number() Over(Order by [ac#], cal) - row_number() Over(Partition by [ac#], sign(bal) Order by [ac#], cal) rnDelta
from #p)
,mycte1 as (
select * ,
sum(Case when bal< 0 Then 1 Else 0 End) Over(Partition by [ac#], rnDelta Order by [ac#],cal ) cnt
from mycte
SELECT distinct [ac#] from mycte1
Where cnt>=5
drop table #p

How to get the date on which a material has gone into stock

Dear All,
Suppose that I have some 20 unrestricted stock for a material. I want to know on which date the same has gone into stock ..Maybe 15 might have gone before 2 weeks and 5 might have gone a couple of days ago.
How can we get the details for the same .
Thanking you in advance,
Shankar

Although you can look at the materia documents created for this material in recent past but that is not a way to track this kind of information. Batch management can be used for enabling tracking of this kind of information. Take for example following situation -
    1st January 100 PC IN
    10th January 50 PC IN
    1st Feburary 75 PC OUT
    2nd Feburary 25 PC OUT
You get only this kind of information from material documents but with this information it is not possible to know what you are looking for. If this is the requirement then Batch Management should be enabled.
Cheers,
Sanjeev

How to get the group key, which an approval task assign to

Hi,
When a user is assign to OIM Group (i.e. from User Detail >> Group Membership form), I will call an approval process (using Access Policy).
In that approval process, I have defined two tasks.
1) Assign Approval to Group -> NOT conditional
2) Remove OIM Group From User -> conditional
So, from the 1) task, I will assign this approval to a OIM Group.
If the user click "Approva", a provisioning process will be fired.
If the user click "Deny" (Reject), 2) task will be run.
What I want is this.
From this 2) task, I need to get the "OIM Approval group" key or name (which this approval is assigned to)......
Note: I need to get this group info in the "Approval Process Task" -> "Integration" -> "Map"
Regards,
Chaturanga

Hi,
Yes. I have done that.
Now what I want is this. If the approver "Deny" (Reject) the approval task, I will call another task in the approval process. From that task, I need to run a code, which remove the user from OIM Group.
So, to do it, I have written a java code and created a adapter. So, as a input parameter for that code, I need to give the approval group name(i.e. the OIM group, above approval task is assign to).
How can I get the OIM approval group, which the person who Deny the approval belongs to, from this new approval process task???
Regards,
Chaturanga

How to get the Macbook app which sends camera images back if someone steals it

Similar Messages

Maybe you are looking for